User's Manual

Instruction
Please Read This User Manual Carefully And keep it Properly.
一、 Product Introduction
Thank you for choosing to purchase our company's wireless charging product, which is a fast
charging wireless charger that supports iP12 series mobile phone charging.。
二、 Product Parameters
Name：Simple Mini Magnetic Wireless Charger
Model No：F12
Material: Aluminum Alloy + Plastic Cover + TPE
Color: black/white
Interface: Type-C PD protocol
Input Current：DC 5V-2A,9V-2A，12V-1.5A Max
（It is recommended to match a PD protocol adapter with a power of 18W and above）
Output power: 15W Max
Compatibility: only supports ip 12 series mobile phones with magnetic suction function and
wireless charging function
（Only supports ip original protective cover with magnetic attraction function, and does not
guarantee compatibility with third-party magnet accessories）
Product size: 58mm*58mm*5.1mm (without packaging)
Product weight: 73.8g (without packaging)
Cable length: 1.2 or 1.5 M
Note: The above parameters are derived from actual product measurements, actual
parameters will vary due to products or other factors。
三、 Packing list
Wireless charger*1
Manual *1
四、 Instructions for use
1、 Insert the Type-C socket of the wireless charger into the power supply of the adapter,
and then attach the wireless receiving position of the mobile device that supports wireless
charging to the wireless charger transmitting area, and try to ensure that the wireless
receiving position is aligned with the center of the product. (The wireless receiving
position is generally in the center of the mobile device)。
2、 When charging is complete, please remove the wireless charger。
五、 Matters needing attention
During the charging process of the wireless device, the mobile device runs high-power
applications on the mobile device or uses the application on the device for a long time, and
the mobile device heats up. This is a normal situation and will not affect the service life or
performance of the device.。
1、 This product only supports wireless charging for ip 12 series mobile phones with magnetic
wireless charging function.；
2、 This product only supports ip original protective cover with magnetic attraction function,
and does not guarantee compatibility with third-party magnet accessories；
3、 It is recommended to use a PD-certified adapter power supply, or other PD adapter
power supplies that comply with international safety standards (5V-2A, 9A-2A;)