User's Manual

UTC. All Rights Reserved. 1 P/N 0000000 – Rev. A – 06 Nov 12
6540UPIW-OEM
100 lb Pet Immune Wireless Motion Detector Sensor
Product Introduction
The 6540PIW100 Pet Immune Wireless Motion Detector Sensor has a
brand new range of volumetric motion sensor using a Fresnel lens, PIR
element and digital signal processing. This product complies with
UL639. It is suitable for indoor use in residential environments. For the
consumer, it builds value in meeting security needs with respecting
budgets. Quick to install and comes with a stylish low profile design. It
provides detection for a variety of ranges, including up to 360 degrees
of coverage for ceiling mount applications. It even has an option setting
for smart pet immunity up to 100lbs / 45kg, making this product all the
more attractive. This product delivers easy solutions for installers -
being equipped with flexible installation heights and optional mounting
bracket which are ideal for your security solution.
This wireless product works in conjunction with your wireless Control
Panel, providing a local indication.
About This Guide
This User Guide describes how to install, the operation and
maintenance of this product. The User Guide is organized as you intent
to use this product with step by step instructions.
Keep this document in a handy location and refer to it when you have
questions about this product and its functions and features. Reading
this guide is the only way to learn how to use your product wisely and
to know how to react in the event of an alarm.
1. General Information
Passive infrared (PIR) motion sensor technology provides one of the
most reliable and cost effective methods for protecting spaces in
homes, offices, or industrial facilities. PIR motion sensors sense
temperature contrasts between a relatively stable background and
hotter or colder objects moving across their fields of view. The sensors
emit no energy of their own, they merely
see infrared images.
This product uses a Fresnel lens, PIR sensor element and digital signal
processing. The Fresnel lens focuses the 90
o
viewing range onto the
PIR sensor element through 24 lenses grouped into short, medium and
long range viewing. See picture below.
From a side view, the PIR detection range shows overlapping coverage
to ensure complete range detection. As shown here.
With all single lens Motion Detectors, it cannot see directly underneath
the device. Therefore mounting the device higher and angling down
maybe preferred.
The digital signal processing translates the heat signatures into
movement detection within the viewing range. Based on these
signatures the electronics determines the different between pets and
humans. To ensure a 100 lb / 45 kg pet can be detected versus a
person of the same weight, the motion detector uses a 4-pulse
algorithm, twice the industry norm.
2. Mounting Guideline
The technology used in these detectors
resists false alarm hazards. However,
avoid potential causes of instability
such as:
o Direct sunlight on the detector.
o Heat sources within the
detector field of view.
o Strong draughts onto the
detector.
o Large animals within the
detector field of view. (except for
pet immune version)
o Obscuring the detector field of
view with large objects, such as
furniture.
Not suitable for outdoor use.
3. Mounting the Sensor
A. Unscrew the base screw on the
detector until loose. The screw can be
retained in the product to secure
cover when complete with installation.
B. Lift detector cover out from the base
and off the lugs at the top.
C. Loosen the PCB lock screw and
remove the electronic assembly to
gain access to the case mounting
holes. Please use the battery
terminals as a hand hold in removing
the electronics.
D. Locate the base on the wall between
4.1 and 10 ft (1.5 - 3.1 m) from the floor.
Recommended height is 2 m / 6’ 7”. For flat wall mounting
use a minimum of 2
screws in positions A. For corner
6’7” 13’1” 19’8”
26’2”
32’9”
40’0”
2m
6’7”
2m 4m 6m 8m 10m 12m
Long Range
Medium Range
Short
Range
2
Top
Cover