0/100 Mbps Network Card Fast Ethernet User Guide model number USR7900 part number R24.0209.
Introduction The U.S. Robotics Ethernet Network Card is a dual-speed Ethernet card for PCI local bus-compliant computers. A true Plug and Play device, this card is auto-configurable upon power up and also supports auto-negotiation to automatically select the optimum speed and communication mode of an attached device. The U.S Robotics Ethernet Network Card complies with ACPI and OnNow PC98/PC99 and also supports Remote LAN Wakeup. By connecting the U.S.
Installation Procedure All Users Make sure that your computer is shut down. Turn off your computer and all peripheral devices. Unplug your computer. Remove the cover from your computer. Unscrew and remove the expansion slot cover from a free PCI slot. Insert the Ethernet Network Card completely into the PCI slot. Secure the modem with the slot screw. After you have secured the Ethernet Network Card, replace the cover and turn your PC on. Windows 98 users When Windows detects the new hardware, click Next.
Windows XP Users When the Found New Hardware Wizard detects the NIC, select Install from a list or specific location and click Next. Select Search for the best driver in these locations and then select Include this location in the search: . Insert the Installation CD into your CD-ROM drive. Type D:\WinXP and click Next. If your CD-ROM drive uses a different letter, type that letter in place of “D”. * After the driver installation is complete, click Finish to complete the installation procedure.
Troubleshooting Check the following troubleshooting items before contacting the U.S. Robotics Technical Support department. I am experiencing compatibility problems between my computer and the Ethernet Network Card. Check with your computer’s documentation to make sure that your computer’s BIOS supports the following: • Supports the PCI Local Bus Specification v2.0 or later. • An enabled bus-master slot and not a slave PCI slot. • Make sure the PCI slot is configured to support INTA.
Country USA Canada Country Argentina Brazil México Chile Colômbia Costa Rica Peru Puerto Rico Venezuela Voice (801)-401-1143 (801)-401-1146 Online http://www.usr.com/support/s-online_emailtechie.asp http://www.usr.com/support/s-online_emailtechie.
6 4 3PCPUJDT $PSQPSBUJPO -JNJUFE 8BSSBOUZ HARDWARE: U.S. Robotics warrants to the end user (“Customer”) that this hardware product will be free from defects in workmanship and materials, under normal use and service, for the following length of time from the date of purchase from U.S. Robotics or its authorised reseller: Twelve (12) months U.S. Robotics’s sole obligation under this express warranty shall be, at U.S.
Specifications Network Interface 10BASE-T: RJ-45 (UTP cable; Cat. 3, 4 or 5) 100BASE-TX: RJ-45 (UTP cable; Cat. 5) Bus Interface 32-bit PCI Bus Master PCI Interrupt Channel INTA LED Indicator Link/Activity/Speed Size (without bracket) 119.92 x 42.96 mm (4.72 x 41.69 in.) Weight 66 g (2.