User Manual VER:NDL703P-V1.
1.Function Introduction Thank you for buying our hunting camera. This product is a dedicated high-definition digital camera that can support record and observe wildlife. This camera has pyroelectric animal/human sensing technology as well as automatically capture high-resolution images and smooth videos technology. This hunting camera will be in a state of energy saving when there is no detection of the animal (body) which can be alerted for a long time.
●If you use a newly purchased memory card for the first time, make sure to format the memory card before using it. ●This camera must use C10 or higher grade brand high speed SD card. The usage of the memory card is as follow: ●According to the instruction next to the memory card slot (chip up), push the SD card into the slot until the card is fully inserted pop up.
3.
1. Left indicator 2. .Light sensor 3. Right indicator 4.Lens 5. primary sensor 6. Left PIR 7. Right PIR 8. LCD 9. MENU 10. Battery bin switch button 11. OK key 12.left key 13.right key 14. up key 15.Down key 16.speaker 17. DC port 18.USB port 19. SD card slot 20. OFF/SETUP/ON 21.AV port Key and interface MODE KEY OK key Functions 1.Click the preview interface to enter the main menu OR return to the previous menu 2.Click on playback interface to enter the settings menu or return to the previous menu 1.
UP Key Down Left Key Right Key 1.On menu setting, click for up choice 2.On time or password setting, click to choose up digit 3.On Preview interface, Long press 3seconds to turn on WIFI, short press to turn off WIFI 4.On photo preview interface , click switching to video preview interface 5.On Playback, click to switch up file 1.On menu setting, click for down choice 2.On time or password setting, click to choose down digit 3.On video preview interface, click switching to photo preview interface 4.
OFF/SETUP/ON 1. Switch to OFF mode to shut down 2. Switch to SETUP mode to setup 3.
4.System settings 1. Switch machine/setting/hunting mode ● When the battery is put in, push the switch from the“OFF”to the“SETUP” to set up the function ●It is monitor mode when push the mode to“ON” , then the camera will perform operations as setting Photo, Video or Photo+Video. ● Push switch to“OFF” , the camera will be turned off, then LCD screen will show nothing. 2.Working Mode The Camera have three modes: Photo, Video, and Photo+Video.
●Video mode: Video resolution option: 4K、 2K、 1296P、 1080P、 720P、 480P、 360P Higher resolution means larger video size, then the SD card can store fewer video, otherwise more. ●Photo + video mode: Once choose Photo + Video mode and pull to“ON” , the camera takes photo firstly, then record. Remarks: The screen will automatically be turned off during recording for power saving, users can click any key to recover display. 3.
6. Record Audio ●Option:“ON”or“OFF” , when choose“ON” , the video recorded with sound, otherwise without 7.
9. IR LED ●Option: Auto, Economy, OFF Auto: If it is shooting under night environment, the camera will automatically adjust the brightness of the lamp according to the current battery power usage; Economy: As long as the IR led light is turned on, the lamp will be in a weak brightness to make the battery longer; OFF: IR light won’ t be turn on even if the environment is completely dark.
11. Monitoring Period ●Camera working time setting. Select "Monitor Period ", then press“OK”key to select" ON ". Then you can set the start time and end time of the camera . After setting up, the camera will only work within the set time every day, and the other time will be in standby state. (when this function is on, the main / secondary sensor does not work) 12.
15. Password Setting ●Choose the menu "password settings ", then press the“OK”key, choose " ON ", press UP/DOWN key to set a 4-digits or 4-letters password between 0-9 or a-z, when the first digit(letter) is set, press LEFT/DOWN key to set the next digit(letter), and press“OK”key to confirm and return to the superior menu after setting up(Quick unlock function: if you forget the boot password, the camera’ s default initial password is :"1111", switch the mode key to“SETUP” mode, then unlock the camera.) 16.
18.WIFI password ●After WIFI password is set successfully, enter this password when the mobile phone is connected to WIFI camera. 19. AUTO WIFI OFF ●Set the time of camera shuts down WIFI automatically. Choose the“AUTO WIFI OFF" option, press“OK”to set 1minute/2minutes/3minutes.
23. Playback 23.1 Turn the switch from "ON" to“SETUP”, press“Right’ ’key to playback mode, press the UP/DOWN key to view the video and pictures , when playing back the video, press“OK”key to start playing and press“OK”again to stop it. During the playback, press“UP”key to quick play by twice /Four times/ 8 times; Press the“DOWN”key to back play -2times/-4 times/ -8 times. If you don't want to play the current video, please press the“MENU”key to exit the current playback. 23.
5.Turn on WIFI by Bluetooth Remote 1.WIFI connect with APP Before using WIFI, please install“Hunting 4K”APP on your mobile phone. Android device please search“ Hunting 4K”in Google Play and install; IOS device please search“Hunting 4K”in Apple Store and install. 2.Running the“Hunting 4K”App in the device 2.1.Local album /turn on Bluetooth /skip. Click to turn on Bluetooth then it will automatically search for Bluetooth. 2.2.
3.The operation difference between IOS and Android system After the IOS system mobile phone is operated to the following figure, go back and find the mobile phone "Settings" icon, in the "Settings", choose the WLAN, and find the camera WIFI name“Hunting 4K”and input the password, when the connection is successful, go back to the APP "Hunting 4K" again to click the “+”to go ahead.
4.Manual connection step to open WIFI 4.1.In“SETUP”mode, long press“UP”key for 3seconds to open WIFI on the video or photo preview interface, the indicator will flash quickly, and the screen shows the "WIFI" connection interface as shown below: 4.2.
4.3.Open“Hunting 4K”APP. Click the“SKIP”on the APP interface, and click“+” to access the live preview interface. 4.4.
5.Exit WIFI 5.1.Press“UP”key to exit WIFI, the camera will return to video interface, and indicator light will be off. 5.2.When finish using the APP, you can click “Exit”on the APP preview interface to turn off WIFI, then camera will enter into“ON”mode or“SETUP”mode. 5.3.
6. Operating mode description 1. Calibrate the installation position of camera In the“SETUP”mode, the best shooting angle and range of the camera can be calculated 1.1.During the calibration, you can choose whether to use the side sensor for observation. 1.2.The steps to calibrate the camera position are as follows: 1.2.1 Tie the camera to a tree or a 1~2meter high object, adjust the direction of the camera’ s lens, and then slowly move the camera to the other side to monitor the object’ s motion track. 1.
1.5.Make sure that the camera will not be interfered unnecessarily when it is working, and avoid direct sunlight or near the branches. The detection range of the sensor is about 120 degrees, and the lens range is about 90 degrees. 2. Normal operation mode In this mode, the camera is triggered to shot by the sensor , the camera enters monitoring mode when the switch is“ON” . After 5 seconds, the LED lights will turn off and the camera starts to work independently and enter the standby mode.
3.Night mode 3.1. At night, the infrared LED light will turn on automatically to provide necessary lighting for taking photos. The LED light illuminates with a range of about 3-20 meters. If the animals are too close to the camera, it may cause overexposure. 3.2. In the night mode, the picture or video is only black and white. When recording video for a long time, low voltage may have a big effect on the stability of the camera, so DO NOT record video at night when the power is low.
7. Image / Data output 1.TV connection This camera can transmit video to external monitor or TV set. Please follow the instructions below 1.1.Turn on the TV, and connect the TV to the camera with AV data cable. 1.2.Turn on the camera and turn the switch to "Setup". 1.3. After successful connection, the camera will enter the playback mode, and the LCD screen will turn black, the captured picture will be displayed on the TV screen. 8.
9. Technical Parameters LCD Screen Camera Photo Resolution Video Resolution Menu language Memory card Format APP USB DC Support System Dimension 2.4”LCD 5.0Mega pixel 30M,24M,20M,16M,12M,8M,5M,3M,1M 4K,2.7K,1080P,720P,480P English, Chinese, German, French, Italian, Spanish, Portuguese, Dutch, Japanese and Danish TF card support 32GB JPEG, MP4 Android @IOS: Hunting 4K USB 2.0 DC-6V/2A Windows XP/Vista/7/8, Mac 10.
Installation instructions for solar power bank: Before loading the solar power bank into the machine, check that there are no water droplets or stagnant water in the type-c interface, dry the water and load it again.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.