Product Manual

ManualsBrandsuSecureprop ManualsElectronicsuSecureHome

Table Of Contents

uSecureHome_Process.vsd

uSecureHome Product Manual

- This device is intended to be an attachment to an existing home security alarm system for the purpose to

extend alarm notifications to smartphones.

- The device is placed near or inside an existing security alarm control panel.

- Power to the device is provided by either:

· Typical installation uses the optional 110/220v power transformer to power the device.

(Professional installers may choose provide 12vdc from the existing security alarm’s back-up

battery.)

· A separate wire connects the device to the siren terminals inside the alarm panel.

Summary of content (4 pages)

PAGE 1
uSecureHome Product Manual - This device is intended to be an attachment to an existing home security alarm system for the purpose to extend alarm notifications to smartphones. - The device is placed near or inside an existing security alarm control panel. - Power to the device is provided by either: · Typical installation uses the optional 110/220v power transformer to power the device. (Professional installers may choose provide 12vdc from the existing security alarm’s back-up battery.
PAGE 2
Step 1 Step 2 · · · · Goto http://usecurehome.com/video Lookup your model security panel Watch video Connect alarm wires as shown in video (red + siren, black – siren) · For professional installation or users with electrical experience only, connect power leads as shown in video (red +; black negative). Others should use optional power transformer. Siren (Bell) Aux Pwr - + · Plug Alarm cable into its jack (first). · Plug power jack into the uSH device. · Green LED comes on for 2-seconds.
PAGE 3
Step 5 · Click on the phone’s Back Button to return to the Wi-Fi manager Main Menu. · Select “Configure Wi-Fi” Step 6 · Select the WiFi AP which you want to connect · Enter your Wi-Fi password, click Save. Your Wi-Fi Your Wi-Fi Step 7 · The uSH green LED comes on steady after a few seconds when configuration is successful. (If green LED does not come on steady, return to the same website (192.168.4.1), go back to step 4.
PAGE 4
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.