User's Manual

ManualsBrandsUsafe ManualsAudio EquipmentBLUETOOTH STEREO HEADSET

Neckband Headset Manual

Power On/Off and Pairing

Press and hold ‘Talk’ button for 3 seconds to switch the headset on or off.

While the headset is off, press and hold

‘Talk’ for 6 seconds to start pairing mode.

Once the headset is in pairing mode, select ‘LUBIX NE1’ among discovered Bluetooth devices

on the phone and enter the password ‘0000’ to pair the headset.

Connecting the Headset

Connecting from the phone: Among registered Bluetooth devices on the phone,

select ‘LUBIX NE1’

Connecting from the headset: Through auto-connect function, the headset automatically connects

to the last device it was connected to when powered on.

Microphone

Power & Talk

Button (with LED)

|◀◀ / ▶▶|

buttons

Play/Pause/3D effect button Left/Right Receivers

Volume Control

buttons

USB Port

Summary of content (6 pages)

PAGE 1
Neckband Headset Manual Play/Pause/3D effect button Left/Right Receivers USB Port Power & Talk Button (with LED) Volume Control buttons Microphone |◀◀ / ▶▶| buttons FF Power On/Off and Pairing Press and hold ‘Talk’ button for 3 seconds to switch the headset on or off. While the headset is off, press and hold ‘Talk’ for 6 seconds to start pairing mode.
PAGE 2
Multi Pairing Multi Pairing Method 1. All Bluetooth devices to be used in multi pairing must be first paired individually using appropriate profiles. (HSP or HFP for phone conversation, and A2DP for high quality audio) ※Each profile cannot be used to connect more than one device simultaneously. See ‘Notice’ below for more details. ※The auto connect function of the headset will connect each profile to the last connected device. 2. Once the host devices are paired, connections can be made by: a.
PAGE 3
Making Phone Calls Voice dial: Press the ‘Talk’ button once to activate voice dial. ※ Some phones might not support this function. Last Number Redial: Double click ‘Talk’ button to redial last number. Answer a call: When receiving a call, press ‘Talk’ button to answer the call. Ending a call: While talking on the phone, press ‘Talk’ button to end the call. Call Refuse: While receiving a call, press ‘Play/Pause’ button to refuse the call. Volume Control: Use ‘+’ / ’-’ buttons to adjust the volume level.
PAGE 4
3D Sound Using 3D Sound 5 types of 3D sound effect are programmed in the order below. While in Play/Pause mode, double click the ‘▶II’ button to select the 3D sound effect of your choice. Types of 3D Sound Effect 1. Normal: No 3D sound effect is applied. ※ Two beeping sound will indicate that the headset is in Normal mode. 2. Provides comfortable and persistent listening environment by taking distractible sound away from ears and head when using earphones. 3.
PAGE 5
LED Light Messages Headset Status LED Status Powering on Blue LED light is on Powering off Red LED light dims and disappears Low battery Red LED light continues to blink Recharging Red LED light stays on Recharging complete Blue LED lights stays on Pairing Mode Blue and Red LED lights flash rapidly Connection complete Blue LED light blinks every two seconds Receiving a call Blue LED light flashes rapidly Talking on the phone Blue LED light repeatedly brightens and dims Playing music Blu
PAGE 6
- Additional Page - G Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation.