Operation Manual

1
DESCRIPTION OF THE FUNCTIONS
Top View:
1. EJECT BUTTON
Press to eject the disc.
Note: Disc can’t be ejected unless the stop or pause button has been pushed first.
2. L.C.D.
These liquid crystal displays (L.C.D.) indicate the track numbers, time (minutes, seconds, frames), pitch range, and relative playback information.
3. AUTO CUE SINGLE / CONTINUE Button
To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display.
*AUTO CUE SINGLE - After each track, the unit pauses at the beginning of next track. The playback starts from audible point.
*CONTINUE -To play all tracks continually.
*OUTRO - The unit will play the last 30 seconds of each track. Press the button for 3 seconds to switch OUTRO function.
4. TIME / STOP BUTTON
This button switches the time display between total remaining time, remaining time of the current song, elapsed playing time. The unit will be in the
“stop” mode if you continue pressing the button for 3 seconds.
5. SEARCH BUTTON
Pressed the button to switch the function of Jog Dial between SEARCH and PITCH BEND.
 When the indicator LED is light, dial the jog for quick search forward and backward.
 When the indicator LED is off, dial the jog for pitch bend function.
 If the jog is unmoved for 8 seconds, the indicator light will go off.
6. TRACK BUTTON
These buttons select the track to be played.
7. PLAY/ PAUSE BUTTON
Each press of this button causes the operation to change between PLAY and PAUSE modes.
8. CUE BUTTON
The cue function allows the CD returning to the memorized point. In PAUSE mode, pressing the CUE button to set the cue point, and the CUE button
blinks; in PLAY mode, press this button to pause the unit at the memorized point.
9. BOP BUTTON
The playback will automatically play from the CUE point upon the button is pressed.
10. PITCH ON/OFF BUTTON
Press the button to be PITCH ON mode, press it again on the PITCH ON mode, and blinks with unit on the PITCH OFF mode.