MAX 7341 BPM EFX BPM FX TAP CUE TAP SE AR CH OUT SD/USB TRACK PGM FOLDER PAN SINGLE/ CONTINUE TIME PITCH PHASE PITCH -16% ECHO FLANGER 0% +16 % MAX 7341 USER`S MANUAL
USER MANUAL 1 35 2 3 4 AC ~2 20 V- 24 0V /5 0H z 20 WATTS OUTPUT ON L GND CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER (OR BACK) THERE ARE NO SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
B. 1 . STEREO MAIN OUTPUT Unbalanced RCA connectors controlled by the master fader. 2 . POWER SWITCH Press the power switch to turn the unit on. To switch the POWER off press the POWER switch again. C. D. 3 . FUSES Under normal operation the fuses should not blow. A blown fuse usually indicates an overload or fault condition. To change the fuse, remove the power cord, pry off the fuse block with a small flathead screwdriver and change the blown fuses. Refer to the specification for fuse current ratings.
16 . S K I P I < < B U T T O N In the “TRACK”node,is last track. 1 7 . S K I P > > I B U T TO N In “FOLDER”NODE,IS NEXT FOLDER. 1 8 . SKIP I<< BUTTON In the “FOLDER”mode,is last folder. 19. TIME BUTTON Use this knob to choose the time mode: Elapsed time, remaining time or total remaining time. 20. CONTINUE / SINGLE BUTTON Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading.
