COMPACT DISC PLAYER PROFESSIONAL DUAL CD MP3 PLAYER WITH SEAMLESS LOOP & SOUND EFFECT INSTRUCTION MANUAL
TABLE OF CONTENTS NOTE ON USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 FOR SAFE AND EFFICIENT OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 DESCRIPTION OF THE FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 FUNCTION OF THE MAIN UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTE ON USE BE CAREFUL OF HIGH TEMPERATURE TO AVOID DUST & MOISTURE TO AVOID PLACING ON UN- STABLE LOCATION DO NOT USE CHEMICALS IF OUT OF WORK, CONTACT SALES AGENCY IMMEDIATELY KEEP AWAY FROM TV & MAGNETISM DO NOT OPEN THE CASE CARE WITH THE POWER CORD For Safe and Efficient Operation • Select the installation location of your unit carefully. Avoid placing it in direct sunlight. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture.
DESCRIPTION OF THE FUNCTIONS Function of the Main Unit : This unit is able to read CDDA and MP3 files, 1. POWER(Power Switch) Press the power switch to turn the unit on, and the LED indicator will be light. To switch the POWER off by pressing the POWER switch again. 11.TACT-LOCK option Select the type of switch in the mixer for FADERSTART wire remote control. 12.MEMORY CARD SLOT Load SD card for playback or copy MP3 audio file from computer through USB cable.
Function of the Control Unit 1. UNIT 1-CONTROL OPERATION PANEL This operation panel remotely controls the main unit 1. 8. TRACK BUTTON These buttons select the track to be played. 2. UNIT 2- CONTROL OPERATION PANEL This operation panel remotely controls the main unit 2. 9. +10 BUTTON Pressed the button to forward 10 tracks. If you forward 10 tracks, and the tracks over total tracks, the unit will jump to track 1... 3. EJECT BUTTON Press to eject the disc.
16. ON/OFF BUTTON (PITCH) SCRATCH: Move the JOG Wheel backward or forward like scratching a turntable record. This sound effect can be performed independently, or in parallel with other effect. BRAKE: To change the speed of PAUSE and START. This sound effect can be performed independently, or in parallel with other effect. REVERSE: The music is playing backward. This sound effect can be performed independently, or in parallel with other effect.
LCD INSTRUCTION 1. TOTAL TRACK – the track number of the CD or CARD. 16. SECONDS – Shows the seconds elapsed or remaining depending on mode setting. – The unit is in playing. – The unit is paused 4. SINGLE – Shows when the unit is set to play only one track. 5. CONT – Shows when the unit is set to play the all tracks continually. 6. OUTRO – Shows when the unit is set to play the last 30 seconds of each track. 7. MP3 – Lights up when the unit is playing MP3 file. 8.
PARAMETER SETTING INSTRUCTION Effect BRAKE Menu BK/START_T BK/STOP_T PS/BPM_SYNC PS/GAIN PS/TIME 12 13 Default 20 (1 unit = 0.1 sec) 20 (1 unit = 0.1 sec) ON 50 (%) SYNC OFF: 50 (1 unit = 0.01 sec) SYNC ON: 4/1 beat ON 40 (%) SYNC OFF: 50 (1 unit=0.01sec) SYNC ON: 4/1 beat ON 50 (%) SYNC OFF: 50 SYNC ON: 4/1 BEAT ON 8/1 BEAT Scope 0 ~100 (0.1 ~ 10 sec) 0 ~100 (0.1 ~ 10 sec) ON / OFF 0 ~ 100 (%) 25~800 (0.25 ~ 8 sec) 1/4 ~ 64/1 beat ON / OFF 1 ~90 (%) 25 ~ 800 (0.
PARAMETER SETTING INSTRUCTION NOTE : 1. BK/START_T : The period time before starting music 2. BK/STOP_T : The period time before stopping music 3. PS/BPM_SYNC: Add the PHASER effect to the music in a cycle based upon the selected beat 4. PS/GAIN: Determine the volume of PHASER effect signal. The higher ratio with stronger effect. 5. PS/TIME: Determine the length of PHASER effect. SYNC-OFF, 0.25 sec is the shortest, and 8 sec is longest; SYNC_ON, 1/4 beat is the shortest and 64 beats is the longest. 6.
Connections Typical connections with a mixer is illustrated below. Please use it for reference. * Connect the connection cords to the line inputs of your mixer. * The connection cords and the remote control connection cable are supplied with the main unit. * Be sure to use the remote control connection cable which has been supplied. Use of another cable type might cause damage.
BASIC OPERATION Loading and Ejecting the Disc When the disc is loaded, press the EJECT button to eject the disc (This may be done on either the player or the remote control side.
TRACK SKIP To advance through the tracks To go back through the tracks Tracks change as follows (This is for a disc containing 4 tracks) When this button is pressed once, the CD player will advance to the beginning of the next track. Tracks change as follows When this button is pressed once, the CD player will skip backward to the beginning of the track, press twice will skip backward to the previous track. .
MATCHING THE BEATS PER MINUTE Match the pitch by monitoring the music of both UNIT 1 and UNIT 2 by ear. When the tempo of the music of the selected CD player is slow compared to the tempo of the other player, move the slider to the + side and match the tempo. When fast, move to the - side. The following description is for the case of matching the pitch of UNIT 2 to the pitch of the music being played on UNIT 1. UNIT 1 is playing. Press PLAY/PAUSE to start UNIT 2. Both CD players are playing discs.
OPERATION OF CUE (WITH PLAY/PAUSE) 1. In pause mode, press CUE button to memorize a point for playing back. We mean it “cue point”. 2. After “cue point” is memorized, in play mode, pressing CUE button will return the music back to the cue point and keep it in pause mode. 3. Press PLAY button again to perform from “cue point”. OPERATION OF A AND B/LOOP 1. Set “A POINT” under play mode by pressing A button (without interruption during playback). 2.
BEFORE SWITCHING OFF THE POWER When you have finished using the CD player, before switching off the power, ensure that the disc is ejected Do not switch off the power when the disc in the loader. Switch off the power after the disc is ejected. POWER OFF POWER OFF TROUBLESHOOTING GUIDE If difficulties arise with your compact disc player, locate the apparent problem in the left-hand column of the table and follow the corrective action suggested in the right-hand column. 1.
USB Driver Installation and Operating Instructions For running program properly, please install the Driver before installing the Application program I. The driver Setup 1. There are two directories on installation CD, please select the Driver directory. 2. Run setup.exe and finish installation. 3. Please press YES to reboot the computer, if operating system is Win98. Please press No to neglect this step, if operating system is Win 2000 and Win XP. 4.
II. Application Setup 1. There are two directories on installation CD. Please select the DJMP3 directory. 2. Follow the onscreen instructions to complete the setup. 3. Run DJMP3 program on START menu after finishing application installation. III. Application instructions • The files in SD card will automatically be listed in SD card box after running application program. • Drag selected files to file list box and release, the selected files will be added to file list box.
7. The refresh button : Refresh ID information of SD card. For avoiding crash, Please press the refresh button after you changed SD card. 8. The format button : Format SD card, and all the file will be deleted. If the SD card is fresh, format it before the first use. 9. The exit button :Exit the application program. 10. The download button : Press this button to download the files to SD card. 11. The progress bar : Show the downloading progress. 12.