Quick Start Guide

ManualsBrandsUROVO ManualsComputers & AccessoriesHandheld Data Terminal

Table Of Contents

SQ47, SQ47P, SQ47D, RT40, RT40P

MDT1-0400, SQ47C, SQ47CP ,

RT40C

Handheld Data Terminal

Appearance and Buttons

Unpacking Instructions

SIM Card, TF Card Installation Method

Note

：1、SIM1 support PSAM or MINI SIM1 。

2、SIM 2 support NANO SIM。

PSAM

SIM1

Battery Installation

TFslot

NANO SIM2

PSAM SIM1

Take card out(as shown )

Gently press SIM card into the tray to secure it. Follow the prompt to

insert TF card into Memory card slot (as shown).

Package Contents

1 x elbac BSU 1 x retpada rewoP 1 x yrettaB 1 x eciveD

Quick Start Guide & Warranty Policy x 1

Press the buttons on both sides

to remove the battery

Type C Charging port

System LED

Scan LED

Touch screen

Keypad

MIC

Battery

Loudspeaker

Rear camera

Scan engine

Flash

Scan button Scan button

PTT custom

button

Volume

up+/down

POGO PIN

Scan engine

Install the battery in the direction as show.

NOTE: Overexertion should be avoided when installing

or removing the battery.

Power Options

USB Data Cable Charging

PC Connections

Connect device to PC using the USB cable provided. If additional

driver is required, PC will automatiaclly download from internet.

Once the USB port has been connected, drag the notiﬁcation bar

from the top of the screen to display the USB setting interface.

1) Tap this to activate developer menu shown.(Figure 1)

2) Tap this to activate USB preference menu shown.(Figure 2)

On Windows PC, go to“My Computer”. Click on“Removable Disk”

to view and transfer device data.

Power on: Press and hold the power button until device vibrates.

Shutdown: Press and hold the power button until the shutdown

prompt appears Click“Shutdown”.

Forced restart: Press and hold the power button for 10 seconds.

Do not press the shutdown prompt. Device will restart.

Connect one end of the USB cable to the adapter, and the other

end to the device. Charging cradle is recommended for convenient

charging.

Figure 1

Select this option

to share the device

data with the

computer.

Select this option

to access device

storage.

Choose this option

for charging the

device.

Choose this option

to transfer images.

Click this to switch on

debug mode

Figure 2

This device

SIM2

Summary of content (4 pages)

PAGE 1
Package Contents Appearance and Buttons Scan engine System LED Scan LED Flash Rear camera Touch screen Loudspeaker Battery Keypad Device x 1 Battery x 1 Power Options Power adapter x 1 Quick Start Guide & Warranty Policy x 1 USB cable x 1 Unpacking Instructions USB Data Cable Charging Connect one end of the USB cable to the adapter, and the other end to the device. Charging cradle is recommended for convenient charging.
PAGE 2
Note: 1.When the device as a SLAVE connect to PC, ' This device ' option will be automatically selected. 2.When the device as a HOST connect to other devices,'Connected device' will be automatically selected.
PAGE 3
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 4
EU Declaration of Conformity Hereby, Urovo Technology Co.,Ltd.declares that this device is in conformity with the Radio Equipment Directive: 2014/53/EU. For the declaration of conformity, vist: https://en.urovo.com/ctm_manage/default.aspx CAUTION: 1. Sound pressure( logo): Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. 2. Battery: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.