Installation Instructions

Sleep

Wake Up

Setup button

Stickers

Do not remove

the cover plate

Wake Up/Sleep control

LE12496AB-EN

Wireless and batteryless Wake Up/Sleep control

0 648 84L/85L - 0 677 86L

0 770 57L - 6 000 84L

5 742 87/93 - 5 743 22 - 5 748 36

7 418 03L/33L/63L

Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule

or socket outlet

Module Control Gateway power outlet and home/away wireless

master switch

Pack contents:

Frequency bands: 2.4 - 2.4835 GHz

Power level: < 100 mW

PAGE 1
Wireless and batteryless Wake Up/Sleep control 0 648 84L/85L - 0 677 86L 0 770 57L - 6 000 84L 5 742 87/93 - 5 743 22 - 5 748 36 7 418 03L/33L/63L Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule or socket outlet Module Control Gateway power outlet and home/away wireless master switch Or Pack contents: Wake Up Wake Up/Sleep control Stickers x2 Sleep Frequency bands: 2.4 - 2.
PAGE 2
1 Start the configuration Press the configuration button of Module Control or press the middle of the wireless master switch (with battery) until its light briefly turns green, and then stop pressing. All wired products lights will turn green.
PAGE 3
2 Pair the wireless, batteryless switch to your connected installation. Make sure that the indicator lights on the wired products are green and not flashing. If not, go back to step 1 . A1 C B + A A2 B C + A1 Tap 3 times any wired product "with Netatmo" with the wireless, batteryless "Wake Up/Sleep control". The light of the wired product flashes rapidly.
PAGE 4
Put the stickers in place Before fixing the wireless control(s) with the removable stickers provided, test one on a non-visible area of the wall. H<2m H>2m You can also fix the wireless control(s) permanently to the wall with screws. www.legrandoc.com/064884L LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.