Installation Instructions

Setup button

Stickers

Do not remove

the cover plate

4 scenes control

Frequency bands: 2.4 - 2.4835 GHz

Power level: < 100 mW

Pack contents:

Wireless and batteryless 4 scenes control

0 677 55L/56L/69L

0 770 26L - 6 000 91L

7 418 02L/32L/62L

Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule

or socket outlet

Module Control

Gateway power outlet and home/

away wireless master switch

LE12617AB-EN

PAGE 1
Wireless and batteryless 4 scenes control 0 677 55L/56L/69L 0 770 26L - 6 000 91L 7 418 02L/32L/62L Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule or socket outlet Module Control Gateway power outlet and home/ away wireless master switch Or Pack contents: 4 scenes control Stickers x2 Frequency bands: 2.4 - 2.
PAGE 2
1 Start the configuration Press the configuration button of Module Control or press the middle of the wireless master switch (with battery) until its light briefly turns green, and then stop pressing. All wired products lights will turn green.
PAGE 3
2 Pair the wireless, batteryless switch to your connected installation. Make sure that the indicator lights on the wired products are green and not flashing. If not, go back to step 1 . C B A1 + A2 B C + A1 Tap 3 times any wired product "with Netatmo" with the wireless, batteryless "4 scenes control". The light of the wired product flashes rapidly.
PAGE 4
Put the stickers in place Before fixing the wireless control(s) with the removable stickers provided, test one on a non-visible area of the wall. H<2m H>2m You can also fix the wireless control(s) permanently to the wall with screws. www.legrandoc.com/067755L LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.