Installation Instructions

Setup button

Stickers

Away

Home

Do not remove

the cover plate

Home/Away control

Module Control

Gateway power outlet and home/away wireless

master switch

Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule

or socket outlet

LE12495AB-EN

Wireless and batteryless Home/Away control

0 648 72L/73L - 0 677 85L

0 770 56L - 6 000 85L

7 418 01L/31L/61L

Pack contents:

Frequency bands: 2.4 - 2.4835 GHz

Power level: < 100 mW

PAGE 1
Wireless and batteryless Home/Away control 0 648 72L/73L - 0 677 85L 0 770 56L - 6 000 85L 7 418 01L/31L/61L Requires to install the connected starter pack and one or more «... with Netatmo» connected switch, micromodule or socket outlet Module Control Gateway power outlet and home/away wireless master switch Or Pack contents: Home Home/Away control Stickers x2 Away Frequency bands: 2.4 - 2.
PAGE 2
1 Start the configuration Press the configuration button of Module Control or press the middle of the wireless master switch (with battery) until its light briefly turns green, and then stop pressing. All wired products lights will turn green.
PAGE 3
2 Pair the wireless, batteryless switch to your connected installation. Make sure that the indicator lights on the wired products are green and not flashing. If not, go back to step 1 . A1 C B + A C A2 B C + A1 Tap 3 times any wired product "with Netatmo" with the wireless, batteryless "Home/Away control". The light of the wired product flashes rapidly.
PAGE 4
Put the stickers in place Before fixing the wireless control(s) with the removable stickers provided, test one on a non-visible area of the wall. H<2m H>2m You can also fix the wireless control(s) permanently to the wall with screws. www.legrandoc.com/064872L LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.