Installation Instructions

Stickers

Setup button

Down

Stop

Do not remove the cover

plates

Roller shutter control

Frequency bands: 2.4 - 2.4835 GHz

Power level: < 100 mW

Module Control Gateway power outlet and home/away

wireless master switch

LE12487AB-EN

Wireless and batteryless roller shutter control

0 676 46L/47L - 0 677 64L

0 770 55L - 6 000 87L

7 418 08L/38L/68L

Requires to install the connected starter pack and one or more «... with Netatmo» connected switches for roller

shutters first.

Pack contents:

PAGE 1
Wireless and batteryless roller shutter control 0 676 46L/47L - 0 677 64L 0 770 55L - 6 000 87L 7 418 08L/38L/68L Requires to install the connected starter pack and one or more «... with Netatmo» connected switches for roller shutters first. Module Control Gateway power outlet and home/away wireless master switch Or Pack contents: Up Roller shutter control Stickers x2 Stop Down Frequency bands: 2.4 - 2.
PAGE 2
1 Start the configuration Press the configuration button of Module Control or press the middle of the wireless master switch until its light briefly turns green, and then stop pressing. All wired products lights will turn green.
PAGE 3
2 Pair the wireless, batteryless switch to control the connected roller shutter switches Make sure that the indicator lights on the wired products are green. If not, go back to precedent step. 1 . B + A C A Tap 3 times the roller shutter switch you want to control with the wireless, batteryless control. The light of the roller shutter switch flashes rapidly. B While pressing the «setup» button, press briefly the «Stop» or «Up» or «Down» button.
PAGE 4
Put the stickers in place Before fixing the wireless switch(es) with the removable stickers provided, test one on a non-visible area of the wall. H<2m H>2m You can also fix the wireless switch(es) permanently to the wall with screws. www.legrandoc.com/067646L LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.