Total Control TKP-8600 Owner’s Manual TKP-8600 Owner’s Manual
Total Control TKP-8600 Owner’s Manual Table � C�tents Coming So�!
TKP-8600 Owner’s Manual Total Control Introducing the TKP-8600 Thank you for purchasing URC’s TKP-8600 in-wall network keypad. Ideal for residential and commercial installations, this slick in-wall touchscreen features a brilliant 8” LCD screen to display vivid images, easy control, and live video from door stations/surveillance cameras. The native Audio Video Intercom offers convenient room-to-room communication with live video is 1080p resolution.
TKP-8600 Owner’s Manual Total Control Parts List The following is included in the box: 2
TKP-8600 Owner’s Manual Total Control TKP-8600 Installation Guidelines The TKP-8600 can be iinstalled in a standard three-gang or dual gang wall box. Releasing the Tamper Resistant Lock 1. Prior to installing the TKP-8600, ALWAYS make sure the tamper lock has been released. Failing to do so could cause physical damage to the TKP-8600. The lock is located at the top of the TKP-8600 and requires a special tool (included in the box) to unlock.
TKP-8600 Owner’s Manual Total Control Wall New Construction The TKP-8600 fits into any 3-gang or 2-gang box. However, there are certain aspects of the installation that must be highlighted. 1. Measure the 3-gang or 2-gang box and using your preferred cutting tool, cut a hole in the wall that matches the measurements of the gang box. 2. Install the 3-gang or 2-gang box into the cut out and securely tighten all the necessary screws. 2-Gang Box 3.
TKP-8600 Owner’s Manual Total Control For Retrofit Boxes Installing the TKP-8600 into a retrofitted 3-gang or 2-gang box is easy. The mounting plate must be installed directly onto the 3-gang/2-gang box. The frame of the retrofit box provides ample space for the TKP-8600 to mount properly on the mounting plate. The mounting place is magnetic and attaches to the back of the TKP-8600 easily. Prior to installing the TKP-8600, assure that the lock is disengaged.
TKP-8600 Owner’s Manual Total Control Navigating the Main Menu Although the specific screen design and button option are dictated by your certified URC integrator, the general layout remains the same amongst URC interfaces. Navigating across pages is performed through screen swipes: • Swipe Left: Reveals additional Main Menu pages, the total amount of pages is determined by the URC programmer and can be customized.
TKP-8600 Owner’s Manual Total Control 5. Shortcuts Menu: Select this icon to access the TKP-8600’s Shortcuts menu. This menu is design to hold up to six (6) your favorite devices or activities found within the current Room/Zone. 6. Main: Select this button to jump the interface to the first Main Menu page. This can be customized to jump to Scenes Menu, if preferred. Speak to your URC programmer about your preferences. 10 7. Power Off: Press this button once to turn off the current room.
TKP-8600 Owner’s Manual Total Control Main Menu View Modes Total Control features two (2) different view modes for the TKP-8600. Each view mode has its own unique properties that compliment the user experience. The view mode must be configured by a certified URC integrator. Speak with your URC programmer about which view mode you want the TKP-8600 to be installed as. • Ribbon View: This is the default view mode and it provides up to six (6) buttons per page.
TKP-8600 Owner’s Manual Total Control Title Bar: The Title Bar is always present regardless of what menu and/or room the TKP-8600 is currently using. Swipe Down On the left of the Title Bar, the current room the TKP-8600 is controlling is displayed. Selecting the Room/Zone name displays the system’s Rooms Menu. The Title Bar, is located at the very top of the display. To access its menu, swipe down from the Title Bar as depicted on the image to the right. Below are the available options in this menu: 1.
TKP-8600 Owner’s Manual Total Control Room’s Menu Tap on the Room/Zone name located at the top left of the screen to display the Rooms Menu. The Rooms Menu provides access to every room programmed in the system. Specific rooms may be hidden from certain interfaces, speak with your URC programmer for that option. Each Room displayed is programmed with a custom Room Name and Image to represent that zone. This menu also provides convenient controls such as controlling volume, turning off lights, and more.
TKP-8600 Owner’s Manual Total Control HDA Zone Linking: This feature is only available when integrated with URC HDA audio distribution system. For more details, please speak with your certified URC integrator. To link two (2) or more Zones together, perform the following: 1. Locate an HDA controlled zone, you’ll find this by looking for the chainlink icon. 2. Select the chainlink icon, this displays the Room Linking Menu. 3.
TKP-8600 Owner’s Manual Total Control Audio Call Using the Intercom The TKP-8600 has the capability of communicating across the home or business over the network to any other URC intercom-enabled device. There are three (3) types of calls that can be made: • Audio Call: Using the built-in microphone of your intercom-enabled device, the Total Control system can make audio only calls to any room/zone that contains a compatible interface.
TKP-8600 Owner’s Manual Total Control • Audio Broadcast Call: This type of call is audio only and can communicate with all intercom-enabled devices found within the system.
TKP-8600 Owner’s Manual Total Control Navigating the Intercom Menu As mentioned on page 9, accessing the Intercom is performed by swiping down on the Title Bar and selecting the Intercom icon. This icon can also be manually placed within the Shortcuts menu. After selecting the Intercom icon, the following is displayed: 1. Available Devices: This section displays all the intercom-enabled devices as well as integrated 3rd Party Door Stations (such as DoorBird) within the system.
TKP-8600 Owner’s Manual Total Control 1 Making an Audio Call 1. From the Intercom Menu, select an available intercom-enabled device. 2. Select Audio Call.
TKP-8600 Owner’s Manual Total Control Once the call is accepted, the TKP-8600 provides two-way communication between intercom-enabled devices via audio. Below are descriptions of the available options on the Audio Call screen: A a. Volume Slider: Allows the user to raise or lower the call volume. b. Mute Toggle: Select to toggle the mute functionality on/off. B c. Enable Video: Select this button to add video to the current call. d.
TKP-8600 Owner’s Manual Total Control 1 Making an Audio-Video Call 1. From the Intercom Menu, select an available intercom-enabled device. 2. Select Audio & Video Call.
TKP-8600 Owner’s Manual Total Control Once the call is accepted, the TKP-8600 provides two-way communication between intercom-enabled devices via audio and video. Below are descriptions of the available options on the Audio Call screen: A a. Volume Slider: Allows the user to raise or lower the call volume. b. Mute Toggle: Select to toggle the mute functionality on/off. B c. End Call: Once selected, the call is terminated and the user is returned to the Main Menu.
TKP-8600 Owner’s Manual Total Control 1 Making an Audio Broadcast Call 1. From the Intercom Menu, select Audio Broadcast Call. 2. The Available Clients screen is displayed. This menu shows all supported devices in the system. Check the boxes of the interfaces you want to include in this Broadcast Call.
TKP-8600 Owner’s Manual Total Control Once the call is accepted, the TKP-8600 provides two-way communication between intercom-enabled devices via audio. Below are descriptions of the available options on the Audio Call screen: A a. Volume Slider: Allows the user to raise or lower the call volume. b. Mute Toggle: Select to toggle the mute functionality on/off. B c. End Call: Once selected, the call is terminated and the user is returned to the Main Menu.
TKP-8600 Owner’s Manual Total Control Settings Menu Access the Settings Menu by sliding the Title Bar down and selecting the Settings icon, refer to page 9 further instruction. Most settings do not require interaction with the end-user. Changing some settings could cause issues with the Total Control system. Only do so when instructed by certified URC integrator and/or URC’s Technical Support Team.
TKP-8600 Owner’s Manual Total Control Sleep Settings Below are the selectable choices available in this menu: 1. LCD Screen is Always On: When selected the TKP-8600’s display never turns off. 2. LCD Screen will Turn Off: When selected the Turn Off After section is selectable. Choose from a 20 second, 30 second, or one (1) minutes time out. 3. LCD Screen will Display a Night Mode: When selected the Start After and Duration option become active.
TKP-8600 Owner’s Manual Total Control General These values are already configured by your URC integrator. Only enter this menu if instructed by your URC integrator and/or URC’s Technical Support Team. 1. Date: Using the left and right arrows; month, day, and year can be configured manually. 2. Time: Using the left and right arrows; hour, minutes, seconds, AM/PM, and 12hour/24hour can be configured manually. 3. Temperature: Using the left and right arrows to set the keypad to Fahrenheit or Celsius.
TKP-8600 Owner’s Manual Total Control Specifications: Processor: Quad Core ARM® Cortex-A35 Memory: eMMC 8GB RAM: LPDDR3 2GB Ethernet: PoE+ 10/100/1000 LCD: 8” Capacitive Touch Display (800 x 1280) Camera: 5MP Limited Warranty Statement: 1. Limited Warranty and Disclaimers Universal Remote Control, Inc.
TKP-8600 Owner’s Manual Total Control THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN. CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, MAY BE AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIED WARRANTIES VARY FROM STATE TO STATE.
TKP-8600 Owner’s Manual Total Control has been altered or removed from the URC equipment. This limited warranty specifically excludes the URC equipment sold by unauthorized resellers. PERMITTED BY APPLICABLE LAW. URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS. With the exception of URC’s IR-only, broad-based consumer remotes, none of URC’s PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales.