DEVICES USER MANUAL
INTRODUCTION • This document explains how to start using the different devices of Upstreem’s Active Tool Suite UPSTREEM SA – PROPRIETARY AND CONFIDENTIAL
DEVICE INFORMATION • Product Name: ActiveHome and ActiveTrack • Model No.: AH11-22-11 and AT11-22-11 • Power rating: • In : 5V DC 1.
WHAT IS WHAT • Upstreem’s Active Tool Suite consists of : • ActiveTrack : the electronic watch • ActiveHome : the home unit • A charging cradle • USB cables and power plugs • A removal tool to take the strap out of ActiveTrack • Straps and consumable plastic parts UPSTREEM SA – PROPRIETARY AND CONFIDENTIAL
STARTING ACTIVEHOME • To start ActiveHome, connect the USB cable to the micro USB interface at the back side of ActiveHome • Then, connect the other side of the USB to a power outlet using the power plug • ActiveHome will start automatically.
PREPARING ACTIVETRACK • To start using ActiveTrack, cut the strap at the right length according to one of the pre-defined lines • For indication on lengths, refer to the Installation Manual • Then, insert a plastic part in each end of the strap as shown here UPSTREEM SA – PROPRIETARY AND CONFIDENTIAL
PREPARING ACTIVETRACK • After this, insert the other type of plastic part in the core of ActiveTrack • You can now insert one end of the strap in ActiveTrack as shown here • Put ActiveTrack on the offender wrist and insert the other end of the strap following the same principle UPSTREEM SA – PROPRIETARY AND CONFIDENTIAL
PREPARING ACTIVETRACK • Finally, you can power on ActiveTrack by connecting it to the charging cradle and connecting the charging cradle to a power source • ActiveTrack starts and it displays time and date. It is then ready for use.
USING ACTIVETRACK – MAIN SCREEN • By default, ActiveTrack displays the main screen. The main screen indicates : • • • • Date and time Battery status Current curfew In the example here, it is currently 6.58 PM and you must be home between 6.00 PM and 12.
USING ACTIVETRACK – ACKNOWLEDGE • When a text message is received by ActiveTrack or when there is a notification, ActiveTrack vibrates and displays the message or notification. • You need to acknowledge it by doing a long push on one of the buttons. • When the message or notification is successfully acknowledged, the icon appears on the screen.
USING ACTIVETRACK – ALARMS • If you are in violation, ActiveTrack vibrates and displays an icon indicating the violation type. The meaning of the icons is as follows : : you must go home : zone alert. You are not authorized to be here.
DEINSTALLING ACTIVETRACK • To deinstall ActiveTrack, start by cutting the strap • Then, remove the plastic parts. They are consumables and can thus be broken.
FCC WARNING 15.19 (All FCC application) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.
