User's Manual

1 2 3

USB 2.0 Hi-speed 2 Port CardBus

User’ s Manual

1. USB 2.0 Hi-Speed 2 port CardBus

2. Driver for Windows/Mac in CD-ROM

3. USB Charger Cable x1

4. USB 2.0 cable x1

5. User’ s Manual

Warning:

Normally internal power will not supply sufficient power for

devices which require larger power consumption (USB 2.0

peripherals for instant), to avoid any possible operational

failure of devices, it is recommended USB Charger cable is to

be linked, in case, the devices still not function properly,

please replace it with external AC Adapter. External AC

Adapter is to be purchased separately

This USB2.0 Hi-Speed 2 port CardBus is compliant with

latest USB Spec Revision 2.0, i.e. support high-speed (480

Mbps), full-speed (12 Mbps) and low-speed (1.5 Mbps) data

transaction rate. It is fully backward compatible with

previous USB 1.1 products. You will enjoy the Hi-Speed that

USB2.0 technology provides, particularly when you are

operating the devices, which need mass data transaction,

such as DV Camcorder, Digital camera …etc

λ Compliant with USB Spec Revision 2.0

λ Compliant with Open Host Controller Interface Spec for USB

Revision 1.0a

λ All 2 downstream ports can handle high-speed (480 Mbps),

full-speed (12 Mbps) and low-speed (1.5 Mbps) transaction rate

λ All 2 downstream ports are shared by OHCI and EHCI Host

Controller core

λ Plug and Play capability

λ USB Charger Cable

λ Use with IBM PC compatible

λ Use with Mac PowerBook compatible

λ Recommended CPU speed at Pentium III or AMD-K7 or higher,

RAM 128MB

λ Recommended CPU is G3 300, RAM 128MB

λ Windows 98, 98SE, ME, Windows 2000 and Windows XP*

λ Mac OS X 10.1(Support USB 2.0 Driver)

λ Mac OS 9.1(Only support USB 1.1)

λ Available Type II CardBus-enabled slot.

λ Available USB port for computer.

PAGE 1
Warning: Normally internal power will not supply sufficient power for λ Compliant with USB Spec Revision 2.0 devices which require larger power consumption (USB 2.0 λ Compliant with Open Host Controller Interface Spec for USB Revision 1.0a peripherals for instant), to avoid any possible operational failure of devices, it is recommended USB Charger cable is to λ full-speed (12 Mbps) and low-speed (1.5 Mbps) transaction rate be linked, in case, the devices still not function properly, USB 2.
PAGE 2
1. Turn on your computer and insert the Driver CD. And 1. Turn on your computer and insert the Driver CD. And open desktop will show the USB 2.0 Hi-speed PCI Card Window the Driver CD, Double-click the (or click CD-ROM:\ setup.exe). Please click [Install USB 2.0 2. After s etup is completed, click [Restart] button. driver] to install USB 2.0 driver. 3. After computer is restarted completed, connect USB 2. After s etup is completed, select [Yes, I want to restart my computer now.
PAGE 3
INFORMATION TO USER: This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.