= PHILIPS FCC Statement FCC Class B Radio Frequency Interference Statement Note: This equipment-has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Hn 2 PHILIPS 4. Consult the dealer or an experienced radio/television technician for help. Note 1: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note 2: Shielded interface cables, if any, must be used in order to comply with emission limits. CE Declaration of conformity The USB Hub is in conformity with EUROPEAN STANDARD EN 55022/A1 Class B,and EN 801-4).
z PHILIPS Table of Contents 1. About this product 1 I.1. Package Contents I 1.2, Features c.uvvirininii iii eee, | 1.3. Identification cee eee | 2. Installation 2 2.1. PLACEMENT «ovens ean 2 2.2: Adaptation IEEE 2 2.3. Power CONNECTION voeuverierernivieeriieeneinreiininanans 3 2.4. USB Connection 4 2.5, SETUP «ene 4 3.
ii & PHILIPS 2 1. About this product 1.1 Package Contents Each package should include the following parts : ¢ | USB 4-port Clip-On HUB = * | USB cable * | Switching AC Adapter * | Owner's manual 1.2 Features Fulfill the -USB-IF Specification Revision 1.1 and HID Class Definition Rev.1.0. Support up to: 127 USB devices simultaneously. Stand-alone or clip-on to Philips 1999/2000 CRT monitor range. Support for mealtime dynamic insertion and removal. I Upstream port and 4 Downstream ports.
© PHILIPS 4. Up Stream Port 1 USB B-type receptacle to connect to the PC. 5. Power Socket For the supplied AC Adapter jack" to connect to. Installation 2.1 Placement The placement of this hub can be either clipping on the pedestal or multimedia base of the Philips 1999/2000 CRT monitor range or standing alone to the PC. a soc 2.2 Adaptation This Hub consists of two parts: functional and aesthetic. The aesthetic element is a removable cover.
g PHILIPS = For Philips pedestals: The new attachable USB Hub can be rotated to any position around the monitor's base (see graph 3 & 4). This accommodates users who prefer to connect USB peripherals like keyboards, joysticks and mouses conveniently in the front of their monitor, as well as those who opt for Hub connections at the rear of the monitor. if requirements changed, the hub position can be re positioned at any time to concur changing needs.
= PHILIPS 2.4 USB connection I. USB devices er Video Tam: This hub can be connected or disconnected to your sn, PC when the computers up-and running programs, by using any USB port on your computer. This product allows your computer to interface with various USB devices. type connector . A conqueror] AF Insert A'connector into | = 1H the down stream port on B the PC or this hub. Bec. Insert B connector into the up stream port of this hub or other USB devices.
will appear. 0 Your computer will then start up the Device Driver Wizard, and install the hub. 0 Once the setup has finished the installation, you can connect USB devices to it. 4. Trouble Shooting = PHILIPS Please refer to the following list of common problems encountered and possible causes. Please contact the vendor you purchased from for any problem not listed below. Problem(s) Possible Cause(s) ¢ Hub cannot be recognized. e Displays 2a “Y” mark on the Hub item in Device Manager.