INNTTRRO N ON TIIO CT UC DU OD Welcome to the Notebook PC Thank you for purchasing your new notebook. Your Notebook features the latest advances in portable computing technology. Your new notebook will meet your computing needs both today and in the future with modular design provides maximum expandability without compromising portability.
System At A Glance FRONT VIEW 2
1. LCD LATCH The LCD latch unlock the LCD panel. 2. KEYBOARD The keyboard is used to enter data. It has an embedded numeric keypad and cursor control keys. 3. GPS GPS (Global Positioning Service) 4. WIRELESS AND BLUETOOTH ON/O FF KEY Press the On/Off key repeatedly to select one or both of wireless and Bluetooth to enable or disable. When Wireless icon (key top) appears green, the wireless LAN function is enabled. 5.
P OWER BUTTON 8. The power button turns the notebook on and off. Press momentarily to turn on the system. Press and hold for at least 3~4 seconds to turn off the system. How this key behaves can be defined in [Start > Settings > Control Panel > Power Options > Advanced] menu. KEYBOARD 9. The keyboard is used to enter data. It has an embedded numeric keypad and cursor control keys. (See Keyboard Section for details.) 10.
Green light indicates the numeric keypad is activated. Green light indicates the cap-lock is activated. Green light indicates the scroll-lock is activated. Green light indicates the GPS (Global Positioning Service) is activated. Green light indicates the bluetooth is activated. Green light indicates the wireless is activated. 13. BUILT-IN STEREO S PEAKERS The built-in speakers output the sound in stereo. 14. THE BUILT -IN MICROPHONE The built-in microphone is located directly at the left of the keyboard.
Blinking orange light indicates the battery is being charged when the system is turn ON. Blinking red light indicates the battery is being charged in when the system is turn OFF. Blinking green light indicates the battery power is currently low. 18. TOUCHP AD BUTTONS The buttons below the TouchPad correspond to the left and right buttons on a standard mouse. LEFT VIEW 1. KENSINGTON LOCK KEYHOLE Your computer includes a keyhole to be used with a standard Kensington lock.
3. 1394 USB A fast external bus standard that supports data transfer rates of up to 400 Mbps (400 million bits per second). Can be used to connect up 63 external devices, also supports isochronous data -- delivering data at a guaranteed rate. This makes it ideal for devices that need to transfer high levels of data in realtime, such as video devices. Also supports both Plug-and-Play and hot plugging, and also provides power to peripheral devices. 4. MICROPHONE J ACK The microphone jack (3.
9. CARD E JECT BUTTON Press the eject button to release the PC Card. RIGHT VIEW 1. BATTERY P ACK The battery pack is a built-in power source for the notebook. 2. O PTICAL DRIVE If your computer comes with the CD-RW/DVD Combo/DVD Dual, you may save data onto a CD-R / CD-RW or DVD RW disc. 3. DISK EJECT BUTTON Press the eject button to eject the disk tray. 4. MANUAL E JECT KEY HOLE The manual eject keyhole allows you to manually eject a jammed disk. 5. USB 2.
REAR VIEW 1. MODEM P ORT This is where you plug the phone jack (RJ-11) for fax/modem functions. 2. ETHERNET / LAN P ORT The port connects to a network hub via the RJ-45 cable and also conforms to 10/100/1000Base-TX transmission protocol. 3. PS/2 S ERIAL P ORT This is where you connect PS/2-type mouse or keyboard. 4. TV (S-V IDEO) P ORT The S-Video port permits you to redirect the screen output to a television set or any analog video playback device.
7. E XTERNAL VGA P ORT The 15-pin VGA analog port is for connecting the external CRT monitor or projector. 8. P OWER J ACK (DC-IN) The DC-out jack of the AC Adapter connects here and powers the computer. 9. V ENTILATION G RILL The fan grill is where air is exchanged to dissipate the internal heat. Do not block this airway completely.
1. P ORT REPLICATOR P ORT The system can be docked onto an optional port replicator for additional input / output ports. 2. SWAPPABLE DEVICE BAY L ATCH Push the latch and pull on the drive hard case to remove the swappable device. 3. SWAPPABLE DEVICE BAY The optical drive resides in the Swappable Device Bay. Additionally, you may also purchase an optional hard drive module, or an empty shell (to reduce travel weight) to be used in this bay. 4.
STTAARRTTIINNG R NO UR OU YO GY K OK OO BO EB TE OT Operating Environment You can use your computer under a wide range of environmental conditions. However, to ensure long use and continued high performance, consider the following factors when setting up your computer: Set the computer on a flat, stable surface. To prevent damage to the computer’s hard disk drive, avoid using the computer where it will be exposed to strong vibration.
Connecting to a Power Source You can use the provided AC adapter to supply your computer with power from an AC wall outlet. 1. Place the computer so that you have easy access to its rear panel. 2. Plug the AC adapter’s connector into the DC-IN connector on the rear panel of the computer. 3. Connect the power cord to the AC adapter and then to a wall outlet. Do not use inferior extension cords as this may result in damage to your Notebook. An AC adapter is provided along with your Notebook.
Turning on Your Notebook Computer Before turning on your computer, make sure you are familiar with its features as mentioned in previous chapter. Once you have set up your notebook you are now ready to turn it on. To do this press the power button. Operating on Battery Power Your computer comes with a rechargeable battery pack that lets you operate the computer without an external power source. We recommend you to use batteries that are approved by an authorized dealer.
Battery Low-Power Warning Low Battery Warning Low battery condition occurs when battery power is reduced to 6%. The green power LED indicator blinks and the system beeps once every 16 seconds or so. Very Low Battery Warning Very Low battery condition occurs at 3 % power remaining. The power LED indicator blinks and the system beeps at 4-second interval. When the notebook warns you of its low battery condition, you will have about 3-5 minutes to save your current work.
3. Insert the battery into the empty compartment. It is designed so that it only fits one way. It should easily “click” into place. 4. Be sure that the battery release latch on the battery has clicked into place. This will prevent the battery from sliding out of its compartment.
To remove the battery pack: 6 1. Turn off the Notebook. 2. Slide the battery latch into the direction of the arrow as shown in the illustration. 3. Hold the battery at the finger grip and slide the battery out.
Charging the Battery and Charging Time To charge the battery, while the battery pack is in the notebook, plug the AC adapter into the notebook and an electrical outlet. The charging time is approximately 2.5 hours when the notebook is turned off and approximately 4.5-6 hours when the notebook is turned on. When the battery is fully charged, the battery charge indicator becomes dark (off). If system runs at heavy loading or in a high temperature environment, the battery may not be fully charged.
Checking the Battery Level You can check the remaining battery power in the Windows battery status indicator, which is located at the lower right-hand corner of the task bar. (If you do not see a battery or AC-in icon on the task tray, go to Power Options Properties box and click on the Advanced tab. Check off ``Always show icon on the task bar``.) Alternatively, you can access the power meter by clicking the Power Options icon in the Windows Control Panel.
Then discharge the battery by entering the BIOS setup screen. (Press F2 key as soon as you turn on the computer. And let it remain at the setup screen until the battery runs out. Fully charge the battery again. Using Windows Power Options Windows Power Management provides basic power saving features. In the Windows Power Options Properties [Start > Settings > Control Panel > Power Options] dialogue box, you may enter time-out values for display and hard disk drive.
In this dialog box, you can manually set the LCD and hard drive’s time-out values in the Plugged in column and in the Running on batteries column. Lower time-out values will save more battery power. Also consult Windows user guide for more information on how to use Windows power management functions. Actual dialogue box shown above may appear slightly different.
For Windows 2000 / XP users, hibernation is handled by the operating system; therefore, no special disk partition or disk file is necessary. If you wish to activate Hibernate mode, you need enable Hibernate Support in the Hibernate tab of the Power Options menu. Do not install or remove the memory module when the system is in the suspend mode. Actual dialogue box shown above may appear slightly different. Power Button Action The notebook PC’s power button turns the notebook on and off the system.
In the When I close the lid of my portable computer pull-down menu, DO NOT select Do nothing – otherwise the system will still run at high speed while the processor’s fan grill is fully blocked by the closed LCD panel. The heat will damage the LCD panel.
Low Battery Warning You can define when and how the system warns you of its battery-low condition. Go to the Alarms tab in the Power Options Properties box. If you wish to hear audible beeps, click on the Alarm Action button and put a check on Sound Alarm. Consult Windows user guide for more information on how to use Windows power management functions. Actual dialogue box shown above may appear slightly different.
CD/DVD Drives The Notebook comes with a built-in CD-ROM drive module. The CD-ROM drive allows you to run the latest multimedia CD titles providing a new educational and entertainment dimension to your personal computing experience. CD-ROM – these drives allow you to use data and audio CDs with your computer. DVD-ROM – these drives have all the functions of a CD ROM/CD-RW in addition to reading DVD disc. You can also record files and movies to recordable and re-recordable DVD disc on compatible drives.
3. Push the CD-ROM release latch in the direction of the arrow indicated in the illustration. 4. Pull on the CD-ROM finger grip as indicated in the illustration to slide the CD-ROM module out of the bay. 5. To insert the CD-ROM module, slide the module into the drive bay so that it mates with its connector. You will hear the release latch click shut.
The CD-ROM module can be swapped with a DVD module, second battery, secondary SATA HDD or an Air bay (dummy).
Function Keys (Quick Keys) Graphic Symbol Touch Pad On/Off Action System Control Fn + F1 Enters Suspend Mode. Fn + F2 Touch Pad On/Off Fn + F3 Changes Display Mode: LCD-only, CRT-only and LDC&CRT.
Fn + F4 Decreases Display Brightness. Fn + F5 Increases Display Brightness. Fn + F6 Mutes audio / sound Fn + F7 Turns Speaker Volume down. Fn + F8 Turns Speaker Volume up. Fn + F9 Playback or Pause Fn + F10 Stop Fn + F11 Backward Fn + F12 Forward Num Lk Number Lock Scr Lk Fn + Scroll Lock Enables the embedded keypad to work in numeric mode. The keys act like numeric keypads in a calculator. Use this mode when you need to do a lot of numeric data entry.
Left button – click once to select an item, double-click to open a file or program. Right button – use the right button to open special menus. Memory card reader Memory card readers are a relatively new addition to notebook computers. They are an ideal replacement for the floppy disk drive because the cards are small and light and have a large storage capacity.
Audio Subsystem Your computer’s audio subsystem is Sound Blaster Pro-compatible. Adjusting the Volume Manually To increase the volume, press Fn+F8. To decrease the volume, press Fn+F7. Adjusting the Audio Volume in Windows Click the speaker symbol in the task tray in Windows. Drag the volume control bar up or down to adjust the volume. To temporarily silence the speaker without changing the volume setting, click Mute. Voice Recording A built-in microphone allows you to record sound.
To change the modem setting, do the following: 1. Go to [Start > Settings > Control Panel] and double-click on Modem Settings icon. You will see a similar dialog box. 2. Click on the pull-down menu and select the country where it is applicable. Click on OK to exit. Ethernet Your computer is equipped with a 10/100/1000Base-TX Fast Ethernet network adapter. Connect the active LAN cable to the RJ-45 LAN port located on the left side of the computer.
EXXPPLLO G WIIN NG S RIIN WS OR OW DO ND Using the Windows HELP WINDOWS For Windows XP help, click Start ÎHelp and Support icon will open the dialog box.
DESKTOP Desktop may vary differently on the software installed in your notebook with different or additional shortcuts. Recycle Bin Used for storing deleted files in case you want to recover and save it in your system. The files will only be deleted from the Recycle Bin permanently only if you empty it by right clicking your mouse and select the “Empty Recycle Bin”.
Start Button Allows easy access to all Windows programs. The Start menu allows you to adapt and show the programs used most frequently. If you wish to keep an item, right click the item and click Pin to Start menu. Log Off will enable the current user to log off and allows a new user to log on. Turn Off Computer allows you to shut down, restart, and Stand by modes for power saving purposes.
Notification The icons that appear here are for quick access to some programs and computer functions that you frequently used. For you to see the hidden icons, simply click the icon. To prevent Windows XP from hiding icons: From an empty spot on the Taskbar, right click your mouse and select the Properties, remove the checked mark on the Hide inactive icons. CONTROL PANEL It is in this area that you can change how Windows looks and works. Click Start Î Control Panel dialog box.
Desktop icons Desktop icons give you easy access to your favorite programs and files. Double left-click an icon to open it. MY COMPUTER Quick access your hard drives, CD/DVD drives, memory cards, your documents and more.
MY NETWORK You can access other computers, printers and shared files on your home network from here. RECYCLE BIN When you delete a file it is sent to the Recycle Bin. You can also retrieve the files that you deleted provided you haven’t emptied the Recycle Bin. MY DOCUMENTS This icon gives you quick access to your My Documents folder. This contains all your personal files, music and photos.
Standby – this option will let your computer enter the power saving sleep mode. To return to your work, move the mouse, press a key of your keyboard, or press the power button of the computer. Hibernate – if you choose this option Windows will take a snap shot of your current work and save it to memory, then it will turn off. The next time you turn on your computer will returned back to this saved condition. Restart – this option will let you close Windows and restart your computer.
BIOS SEETTUUPP The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Output System). It runs and maintains a variety of hardware functions. It is a menu-driven software, which allows you to easily configure and change the settings. The BIOS contains manufacture’s default settings for the computer’s standard operations. However, there are occasions when you may be required to modify the default settings in the BIOS.
BIOS Action Keys Function Key Command Description ESC Exit Leaves a sub-menu to return to the previous menu OR exits the BIOS setup while saving changes. Enter Go to Sub Screen Shows the Sub Menu F1 General Help Shows the Help Screen F9 Default setting Load Optimal Defaults F10 Save and Exit Saves changes and reboots the computer. Select a field Selects the next field. ↑ Select an item Selects the next upper item. ↓ Select an item Selects the next lower item.
MAIN SETUP Under this menu, you may change time/date and view basic processor and system memory information. Date Type in the current date, in MM/DD/YY format. N/A Time Type in the current date, in HH:MM:SS format.
ADVANCED SETUP CPU CONFIGURATION Enabled you to configure the CPU settings IDE CONFIGURATION Primary IDE Master Primary Master is where BIOS tries to boot from first. The primary master controls the hard drive. Normally, Auto is selected.
Auto Secondary IDE Master The secondary master controls the ATAPI CD-ROM drive. Normally, Auto is selected. Auto SUPER IO CONFIGURATION (PORT ADDRESS) Parallel Port Address You may choose a value for the parallel port. Disabled/378/278/3BC Parallel Port Mode You may choose any one of these settings. ECP offers the best performance. Normal/Bi-Directional/EPP/ECP Parallel Port IRQ You may choose any one of these settings. IRQ7 offers the best performance.
SECURITY SETUP BOOT SETTINGS CONFIGURATION Change Supervisor Password Install or Change the Password N/A Change User Password Install or Change the Password 6
N/A Using Password Protection Two Levels of Password Protection are available. The BIOS provides both a Supervisor and a User password. If you try to activate both passwords, the Supervisor password must be set first. The passwords activate two different levels of protection: 1. System always asks for password every time it is powered on. 2. System asks for password only when you attempt to enter BIOS utility. The passwords are encrypted and stored in NVRAM.
BOOT SETTINGS CONFIGURATION Quiet boot Disabled: Display normal POST message. Enabled: Display OEM logo instead of POST messages. Disabled/ Enabled Bootup Num-Lock Select Power-on state for Numlock. Off/On BOOT DEVICE PRIORITY 1st Boot Device Set the type of device for the 1st drive BIOS attempts to boot from. 2nd Boot Device Set the type of device for the 2nd drive BIOS attempts to boot from. 3rd Boot Device Set the type of device for the 3rd drive BIOS attempts to boot from.
CD/DVD DRIVES 1st Drive Specifies the boot sequence from the available devices. CD/DVD:SM-Slimtype COMBO SOSC-2/Disabled EXIT SETUP Saves Changes and Exit After you have completed the BIOS settings, select this item to save all settings, exit BIOS Setup utility, and reboot. New system settings will take effect on next power-up. F10 key can be used for this operation.
Discard Changes and Exit Exit system setup without saving any changes. Esc key can be used for this operation. Discard Changes Discards changes done so far to any of the setup questions. F7 key can be used for this operation. Load Optimal Defaults Load Optimal Default value for all the setup questions. F9 key can be used for this operation. Load Failsafe Defaults Load Failsafe Default value for all the setup questions. F8 key can be used for this operation.
UPPG R CO UR OU YO GY NG R ER DIIN TE AD UT RA PU GR MP OM In this chapter, you will learn how to upgrade the DRAM, hard disk drive, and to install the optional wireless LAN mini PCI card. Warning: We strongly recommend you sending your notebook back to your dealer or agent for the specification upgrading. When you upgrade your system, please turn off the power, disconnect the LAN and Modem cable first for your safety. After system upgrade, please screw all the screws before turn on.
Upgrading the Hard Disk Drive Replacing the original drive with one of larger capacity can increase the hard drive capacity of your computer. The computer uses a 9.5 mm (height), 2.5-inch Serial ATA type hard disk. Be sure to make a backup copy of all your data before attempting this operation. Hard drive upgrade is a delicate process. Please observe the following instructions carefully or have a qualified technician install it for you.
3. Un-screw the two screw that lock the HDD compartment. 4. Slide the HDD into the direction of the arrow as shown in the illustration. 5. Pull up the HDD away from the compartment.
Upgrading the System Memory Many applications will generally run faster when the computer’s dynamic memory capacity is increased. The computer provides two DDRII memory sockets, located underneath the keyboard. You can increase the amount of memory by replacing the existing one with a dual inline memory module (commonly known as DIMM) of a higher capacity. Memory upgrade is a delicate process. Please observe the following instructions carefully or have a qualified technician install it for you.
5
TROUBLE SHOOTING Your computer has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling may cause problems. This chapter provides a reference for identifying and correcting common hardware and software problems that you may encounter. When you encounter a problem, you should first try to go through the recommendations in this chapter.
Be sure you have not performed an incorrect setting on the hardware devices in the BIOS Setup utility. A faulty setting may cause the system to misbehave. If you are not sure of the changes you made, try to restore all the settings to factory defaults. Be sure all the device drivers are installed properly. For example, without the audio driver properly installed, the speakers and microphone will not work.
Sound cannot be recorded Double-click the speaker icon on the lower right corner of the taskbar to see if the microphone has been muted. Click Options and select Properties. Select Recording and click the OK button. After Click OK button, the recording volume control panel will appear. Go to [Start > Settings > Control Panel] and double-click the Multimedia icon (or Sounds and Audio Devices icon). In the Volume or Audio page, make sure that Realtek ALC 880 Audio is the default recording device.
Many browsers store files in the hard drive as a cache to speed up the performance. Check the program’s Online Help for instructions on decreasing the cache size or on removing temporary Internet files. Empty the Recycle Bin to create more disk space. When you delete files, Windows saves them to the Recycle Bin. The hard disk takes longer to read a file If you have been using the drive for a period, the files may be fragmented.
If the disk cannot be ejected, it may be mechanically jammed. Straighten out a paper clip and insert it to a tiny hole next to the eject button. This should reject the disk tray. If not, return the unit for repair. Do not forcefully pull on the disk tray. The Combo or DVD RW drive (optional device) cannot record You need to purchase and install a burner utility program to record files to a blank media.
The characters on the screen repeat while I type. You may be holding the keys down too long while you’re typing. Keep the keyboard clean. Dust and dirt under the keys could cause them to stick. Configure the keyboard to wait longer before the auto repeat feature starts. To adjust this feature, Go to [Start > Settings > Control Panel], and double-click the Keyboard icon. A dialogue box shows up with the adjustable settings for the keyboard.
You need to install additional memory module. For instructions, go to Chapter 4 Upgrading Your Computer. Modem Problems The built-in modem does not respond Make sure the modem driver is loaded properly. Make sure the modem is not disabled under CMOS configuration. Go to [Start > Settings > Control Panel > Phone and Modem Options] and go to Modems tab. Make sure Azalia Modem is listed. Otherwise, click the Add button to add the modem drive, which is located in the factory CD-ROM (or floppy diskette).
Network Adapter / Ethernet Problems The Ethernet adapter does not work Go to [Start > Settings > Control Panel > System > Hardware > Device Manager]. Doubleclick on Network Adapters and check if Intel Gigabit PCI Fast Ethernet Adapter appears as one of the adapters. If it does not exist, Windows has not detected the Intel Gigabit Fast Ethernet adapter or the device driver has not been installed properly. If there is a yellow mark or red-cross on the network adapter, it may be a device or resource conflict.
The PC card cannot be recognized Windows NT4.0 does not support PCMCIA (PC Card) function. You may need an external program for this. Make sure the card is fully inserted; the outer end of the card should be even with the edge of the computer. Remove and insert the PC card again. Make sure there is no IRQ conflict with the card. See Windows on-line help for solving IRQ conflicts. Reboot the computer and see if the problem persists. The card may be defective. Try the card on another system, if possible.
This may be normal for Windows when it is processing other CPU-intensive programs in the background or when the system is accessing slow-speed devices such the floppy disk drive. You may be running too many applications. Try to close some applications or increase system memory for higher performance. The processor may have been overheated due to the system’s inability to regulate its internal heat. Make sure the computer’s ventilation grills are not blocked.
Firewire (IEEE1394) and USB2.0 Problems The USB device does not work Windows NT 4.0 does not support USB protocols Check the settings in the Windows Control Panel. Make sure you have installed the necessary device drivers. Contact the device vendor for additional support. The IEEE1394 port does not work Go to [Start > Settings > Control Panel > System > Hardware > Device Manager]. You should see an entry which reads “Texas Instrument OHCI Compliant IEEE 1394 Host Controllers”.
CO G PE L DE NG AL RA TIIN ER S CT HE ES EC PH CE NE NN RIIP VIIC ON ER EV To expand your computing capabilities, you can add a variety of external devices to your computer. You may, for example, want to add a mouse, modem, or a printer. The computer is equipped with several interface ports, including an enhanced parallel (printer) port, a serial, and USB ports. These are provided as a means of connecting peripheral devices to the computer.
2
External Monitor You can use optional display monitor with your computer. Plug the monitor’s signal connector into the external VGA monitor on the rear panel of the computer. Secure the monitor cable to the external monitor port using the screws on the monitor cable. Plug the monitor’s power cable into a wall outlet. Turn on the monitor and adjust the monitor stand so that you have a good viewing angle of the screen.
TV Out You can connect a TV monitor to the Notebook’s S-Video port and view the Notebook’s video output.
USSIINNG E GPS HE TH GT The GPS, short for Global Positioning System, transmit digital radio signals that contain data on the satellites location and exact time to the earth-bound receivers. GPS has applications beyond navigation and location determination. GPS can also be used to monitor the movement of people and things and bringing precise timing to the world. SYSTEM REQUIREMENT PC notebook with x86 CPU Windows 2000/XP GSM/GPS module installed INSTALLATION 1. Launch setup.exe 2.
2. Click the [Settings] button to set parameters. • • • • • • 2 COM Port is the serial port where the SIM/GPS module is connected. Password is the one that user should enter every Check Interval, or the notebook is moved beyond the Distance since its last check. Notify Phone# is the phone no. that the alert SMS is sent to if user fail to pass the check. PIN is the PIN code, if any, of the SIM card. Check Security On to enable the security check, or uncheck it to disable the security check.
3. Leave the application running. When the password dialog shows up, enter the correct password, or it will start to send alert SMS out every 60 seconds.
The following illustration gives you detail on how GPS will operate and transmit informations.
SPPEECCIIFFIICCAATTIIO S NS ON CPU Intel • Support for Intel Yonah Dual Core processor Pentium M , 667MHz FSB, 2MB L2 Cache, Support for Intel Yonah Single Core processor TDP 31W CPU Speed: Follow Intel the highest CPU speed. Keeping pace with Intel Roadmap through 2007 u-FCPGA Socket if possible Support Merom Dual Core CPU if the socket the same with Yonah.
• Support Ultra ATA 33/66/100 Support 8 USB 2.0/1.1 devices Support Azalia (HD) controller • • BIOS • • • • • • (AMI) AMI 8Mbit BIOS memory Ability to turn off internal modem, LAN option, Wireless Lan (802.11x Golan), Bluetooth GPS & Touch Pad UPEK (ST Micro) TBX for finger print security Landesk functionality Other BIOS options TBD. GRAPHICS MXM TypeII supporting ATI & Nvdia • Daughter card solution.
• Intel Golan WLAN 3945 A/B/G • Power on/ Charging status, Suspend status (on Main board) Caps Lock, Num Lock, Scroll Lock, HDD/CD, Wireless, Blue tooth , GPS (on LED board) LED • POINT DEVICE (Synaptic) • Touch pad with latest S/W feature set. OTR is simultaneous with external PS/2 device (including MS-Intellimouse). With imbedded UPEX touch strip. Touch strip should allow horizontal and vertical scrolling.
Blue tooth • GUBTCR42M Billionton GPS • GPS module (could be enable/disable in BIOS and also has LED indicator)---fixed on the bottom case door. SECURITY Finger strip • STMicro touch strip UPEK Password • • • • • • System password TPM St Micro ST19WP18-TPM-C Kensington Lock Smart Card Internal to the system. Running off PCMCIA controller, Smart card should be orientated so the smart chip must be inserted up. In this model we would like the card slot so it can be orientated with the chip up.
• 1 RJ-45 1 Microphone 1 Line In 1 Audio Out (SPDIF) 1 PCMCIA 1 VGA 1 S-Video 1 PS/2 (Y splitter of mouse and keyboard) 1 Port-replicator 1 Printer Port 1 Serial Port 1 Smart Card 1 DC-In 4 in 1 Card Reader (Built-in SD,MMC,MS 及 MS-Pro) • • • • • • • • • • • • • FUNCTION KEYS • • • • • • • • • • • • • User definable Keys Fn+F1 Suspend switch Fn+F2 Turn On/ Off Touch Pad Fn+F3 LCD/ CRT/ LCD+CRT Switch Fn+F4 Brightness down Fn+F5 Brightness up Fn+F6 Mute Fn+F7 Volume Down Fn+F8 Volume Up Fn+F9 Media Play/
OPERATING SYSTEM Microsoft • Windows 2000, Windows XP SP2(with subsequence service releases), upcoming 64bit Windows Vista. PORT REPLICATOR • Compatibility with 3000 series port replicator (PR1000) CERTIFICATIONS • • • WHQL apply only for Windows XP all drivers software and peripherals must be WHQL certified with MID numbers.
AGENCY REGULATORY NOTICES Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IMPORTANT NOTE: FCC RADIATION EXPOSURE STATEMENT: FCC RF Radiation Exposure Statement: This Transmitter has been demonstrated co-location compliance requirements with (Intel wireless 802.11abg module, FCC ID:PD9WM3945ABG ).This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) and R&TTE Directive (1999/5/EC) issued by the Commission of the European Community.
CANADIAN NOTICE This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Le present appareil numerique nemet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques de Classe B prescrites dans le reglement sur le brouillage radioelectrique edicte par le Ministere des Communications du Canada.
The cord set must have minimum rated current capacity of 7 A. The attachment plug must be a two-pole, grounded type with a Japanese Industrial Standard C8303 (15 A, 125 VAC) configuration. OTHER COUNTRIES The cord set fittings must bear the certification mark of the agency responsible for evaluation in a specific country.
TELEPHONE LINES REQUIREMENT The appropriate utilization of 26AWG telephone line cord on unit. CAUTION: Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. CAUTION: To reduce the risk of fire, use only No. 26AWG or larger telecommunication line cord. BATTERY PACK SAFETY The battery pack is intended to use only with this notebook. Do not disassemble the pack. Do not dispose of the battery pack in fire or water.
LASER SAFETY The optical drive used with this computer is certified as a Class 1 laser device according to the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard and International Standards IEC 825 / IEC 825-1 (EN60825 / EN60825-1). The device is not considered harmful, but the following precautions are recommended: Do not open the unit. Avoid direct exposure to the laser beam. If the unit requires service, contact an authorized service center.
Die Steckdose muB nahe dem Gerat angebracht und leicht zuganglich sein. C AUTION! This p a rt is h ot. Be C are ful. VORSICHT! Di e se Fla c h e wird se hr he iss. When you see this symbol, be careful as this spot may be very hot.
Notice The information in this user’s manual is subject to change without notice. THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL. The information in this user’s manual is protected by copyright laws. No part of this manual may be photocopied or reproduced in any form without prior written authorization from the copyright owners.
Intentionally Left Blank 2