PRODUCT BOOKLET
M570J2-050F-R22NC Product number M570J2-050F-R22NC
Dear customer, Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction.
Illumination intensity The recognized face, of which, the illumination intensity ( “intensity” in short) shall not be lower than 30 Lux. The device has filling light itself, so when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
/6 Steps 1 Paste hole paper on the wall, keep the horizontal line parallel with the ground and the red line 1.25m distance to the ground. Drill 4 screw holes on the wall according to the reminder of hole paper, drill 1 outlet hole according to wiring needs, please use expansion pipe in the parts to knock into the hole if for wall with hard foundation. 3 Fix the device, adjust the device angle manually to reach the optimal recognition angle. Drill here 1.
7/8 Wiring connection Wiring for magnetic door Wiring for automatic door Magnetic lock ~220V Relay interface Door exit (inside) Host Auto-door controller + assembly units Installation notes 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as insufficient voltage (≤11V), repeat restart, system crash and so on.
Features FAQ Warranty description 9 /10 Dear customer, • Characteristics Completely resolve image frauds in all kinds of carriers with infrared and RGB dual-camera dynamic anti-forgery; when face database is 10000, the recognition accuracy is 99.99% ((99.77% recognition rate under 1% false accept rate; 99.27% recognition rate under 0.1% false accept rate).
11
CE Caution: Use the Product in the environment with the temperature Between -10℃ and 50℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment: Product Name: Face recognition terminal Model: OS-M570J2-050F-R22NC, OS-M572C1-C-R22N, M572C1-C-R22N, M572C1-V-R23NC, OS-M572C1-V-R23NC Trade Name: E-mail: wangjianhao@uni-ubi.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.