PRODUCT BOOKLET Uface 7T Lite ( OS-M375K1-C-S23N )
Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction.
The recognized face, of which, the illumination intensity ( “intensity” in short) shall not be lower than 30 Lux. The device has filling light itself, so when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
5/6 Steps 1 According to the site requirements, drill a 35mm-diameter hole in the gate (commonly in the middle or the front), as shown on the picture, is the suggested hole position. Single-channel gate 3 Screw off the fixing nut at the column bottom, thread the cables through the nut. Dual-channel gate Take down the nut 50CM Attention: Hole position should be decided by actual scenes and applied gate type, 50cm is the reference value only.
7/8 Wiring connection Wiring for automatic door Installation notes 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as insufficient voltage (≤11V), repeat restart, system crash and so on. Wiring connection of voltage ~100-240V Auto-door controller + assembly units Sensor (inside) metering is shown as follow.
Features • Characteristics Supports the night filling-light, cooperates with photosensitive sensor; the algorithm with dynamic face detection and recognition is based on video stream; the 1:N recognition accuracy is 99.99% under 0.1% false accept rate. • Store records in local (a) Device using cloud platform supports storing 50 thousand pieces of face images (smaller than 400KB), 1 million pieces of recognition records (0.
CE Caution: For the following equipment: Product Name: Face recognition terminal Model: OS-M375K1-C-S23N Trade Name: Universal Ubiquitous Co., Ltd. E-mail: wangjianhao@uni-ubi.com hereby declares that this [Name: Face recognition terminal, Model: OS-M375K1-C-S23N] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Adapter shall be installed near the equipment and shall be easily accessible.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.