PRODUCT BOOKLET Uface 7 Pro ( OS-M375C4-V-R23WFCQ )
1/2 Platform/Software Operating Instruction Dear customer: Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction.
Illumination intensity 3/4 Position The recognized face, of which, the illumination intensity ( “intensity” in short) shall not be lower than 30 Lux when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
5/6 Steps 1 Paste the installation sticker on the wall, and keep the horizontal line parallel with the ground and the red line 1.4m distance to the ground; drill screw holes on suitable position on the wall according to the installation method (if use 86-box, then no need to drill holes).
7/8 Wiring connection Wiring for magnetic door Wiring for automatic door Installation notes 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” Magnetic lock Auto-door controller + assembly units Relay interface Door exit (inside) Host and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as Sensor (inside) Relay interface shown as follow.
Features • Characteristics 9 / 10 FAQ • Try to restart and reset When the device stops in some interface for a long time, users can plug out the power switch, dynamic dual-camera; face database is 10000, the 1:N recognition accuracy is 99.99% under 0.1% false accept rate. • Store records in local (a) Device using cloud platform supports storing 50 thousand pieces of face images (smaller than 400KB), 1 million pieces of recognition records (0.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.