PRODUCT BOOKLET Product number OS-M355C1-V-R23WFC (Pictures for reference only, subject to our products)
1/2 Platform/Software Operating Instruction Dear customer: Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction.
The recognized face, of which, the illumination intensity ( “intensity” in short) shall not be lower than 30 Lux. The device has filling light itself, so when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
5/6 Steps 1 Wiring instruction (set power wire as an example, the rest can be done in the same manner) 4 Move the support to align the 3 holes on it with holes on the wall, and use the screws to fix the support on the wall. Pre-stripping Wall-mount stickers 1.
7/8 Wiring connection Wiring for magnetic door Wiring for automatic door Installation notes 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” Magnetic lock ~220V Relay interface Door exit (inside) Host Auto-door controller + assembly units and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as Sensor (inside) insufficient voltage (≤11V), repeat restart, system crash and so on.
Features • Characteristics Completely resolve image frauds in all kinds of carriers with infrared and RGB dual-camera dynamic anti-forgery; the recognition accuracy is 99.99% ((99.77% recognition rate under 1% false accept rate; 99.27% recognition rate under 0.1% false accept rate). • Store 10-thousand level database in local (a) Device using cloud platform supports storing 50 thousand pieces of face images (smaller than 400KB), 1 million pieces of recognition records (0.
FCC Radiation Exposure Statement: The transmitter must not be colocated or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. Information to Users According to the FCC Part 15.19, 15.21, and 15.