PRODUCT BOOKLET Uface 4 ( OS-M345E1-V-R23WFCQ )
Dear customer, Thank you for using our product. For better use, please carefully read this instruction. If you have any 1/2 Platform/Software Operating Instruction / issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual Please mark the need for software version when place the order.
Illumination intensity 3/4 Position The recognized face, of which, the illumination intensity “intensity” in short) shall not be lower than 30 Lux when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
5/6 Steps 1 Paste the installation sticker on the wall, and keep the horizontal line parallel with the ground and the red line 1.4m distance to the ground; drill screw holes on suitable position on the wall according to the installation method (if use 86-box, then no need to drill holes), drill 1~2 outlet holes according to wiring need. 3 Align the interface socket and Ethernet port with device back and insert.
7/8 Wiring connection Wiring for magnetic door Magnetic lock Access control relay interface Auto-door controller + assembly units Door exit (inside) Host Installation notes Wiring for automatic door 1. When arrange the wires, if the 12V power supply cable of the host does not adopt the “Special power strip” and is in long distance, resulting in large resistance, then abnormal phenomena may occur easily such as Sensor (inside) Access control relay interface shown as follow.
Features 9 / 10 FAQ • Try to restart and reset • Characteristics Completely solve image frauds in all kinds of carriers with infrared and RGB dual-camera; when face database is 10-thousand. the recognition accuracy is 99.99% ((99.77% recognition rate under 1% false accept rate; 99.27% recognition rate under 0.1% false accept rate). When the device stops in some interface for a long time, users can plug out the can long press RESET hole for 8-12s to restart the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
