PRODUCT BOOKLET
Product number OS-M375C1-V-R22WFC-0101 OS-M375C1-V-R22WFC-0101
Dear customer, Thank you for using our product. For better use, please carefully read this instruction. If you have any issues not mentioned here, please contact the provider. All parts of this booklet are reserved by our company, including words, pictures and graphics. Without written permission, no unit or individual shall extract, copy, translate or edit the content in this instruction.
Illumination intensity Position The recognized face, of which, the illumination intensity(“intensity” in short) shall not be lower than 30 Lux. The device has filling light itself, so when the device put in a totally dark environment, the face illumination intensity, 0.5m distance to the device, is about 100 Lux. The nearer to the device, the higher the intensity is. If there is overexposure on the face, the face characteristics will be unable to be extracted and may lead to hard recognition.
Steps Wiring instruction (set power wire as an example, the rest can be done in the same manner) Move the support to align the 3 holes on it with holes on the wall, and use the screws to fix the support on the wall. Pre-stripping Attention: When apply the air-cooling support, connect the fan wires with interface of power strip in this step, as shown on the picture, insert and fasten.
7/8 Wiring connection Wiring for magnetic door Wiring for automatic door Installation notes 1. Cables inside of the touch switch board shall keep far away from the center area of the board back. Magnetic lock ~220V Auto-door controller + assembly units Sensor (inside) Door exit (inside) Host Host Wired or Wi-Fi Wrong Right DC12V ~220V Wired or Wi-Fi Power (access control) System installation schematic drawing for magnetic door 2.
Features FAQ Warranty description • Characteristics • Try to restart and reset 9 / 10 Dear customer, Completely resolve image frauds in all kinds of carriers with infrared and RGB dual-camera dynamic anti-forgery; when face database is 100000, the recognition accuracy is 99.99% ((99.77% recognition rate under 1% false accept rate; 99.27% recognition rate under 0.1% false accept rate).
CE Caution: Use the Product in the environment with the temperature Between -10℃ and 50℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment: Product Name: Face recognition terminal Model: M375C1-V-R22WFC-0101, M37081-0607-R22WFC, M375C1-V-R22WFC-0101 Trade Name: Universal Ubiquitous Co.,Ltd. E-mail: wangjianhao@uni-ubi.com Adapter shall be installed near the equipment and shall be easily accessible.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.