Uface 3 User Manual In order to have a good experience when using, please read the manual carefully before operating the device.
Device Appearance 27.4 [1.1] 100 [3.9] Infrared Fill-in Light RGB Camera 120 [4.
Product List Host x 1 Desktop Mounting Bracket x 1 M4*30 Self Tapping Screw x 2 M4*30 Machine Screw x 2 Desktop Mounting x 2 Allen Key x 1 Uface 3 Overseas Attendance Manual In order to help you better understand the product, please read the instructions carefully before using the device.
Wall Mounting 1 For wall mounting, the hole shall be drilled according to the hole position of the mounting sticker, and the desktop mounting shall be inserted in the holes. 2 Use an Allen Key to loosen the set screw and remove the wall mounting bracket. 3 For wall mounting, use self-tapping screws to fix the bracket on the wall; for 86 box mounting, use machine screws to fix the bracket on the 86 box.
4 Connect the cable and I/O interfaces (Pro version) to the device. Connect the power supply Following the customer's needs to connect the door lock and exit button. 5 Fasten the device to the wall mounting bracket and use an Allen Key to tighten the bottom set screw. 6 Finish the mounting.
Desktop Mounting 1 Tilt 30° when inserting Tilt 20° when inserting Tilt 10° when inserting Desktop Mounting Bracket 2 After removing the wall mounting bracket, connect the power supply or I/O interfaces. Connect the power supply GND BUTTON DOOR_NO DOOR_COM DOOR_NC Following the customer's needs to connect the door lock and exit button.
3 After the cable is connected, reinstall the wall mounting bracket to the device, and insert the desktop mounting bracket into the holes of different heights according to the angle requirements. 4 Finish the mounting.
Standalone 1 Click ( Network ) to enter the Menu. 1 Click the Network Config to configure the network. If the configuration is completed in booting, there is no need to reconfigure. Set 2 Click ( ) after entering the device password. Login 2 Please input password User Mgmt. Records Network Config System Settings You can choose to turn WLAN on or off, and then choose the wireless network after turning on. Forgot password Network Config 192.168.41.128 84E0F42212345678 WLAN GD-V30.
Add Users 1 Click (User Mgmt.) to enter the user management interface. 2 Click Add users. Set User Management Add users User Mgmt. Records Query users Batch import Network Config System Settings Batch export 4 Click + to enter the photo-taking process to add the photos (optional, for face recognition) (up to 3 registered photos), and then click Next. Add users 3 Enter 1-32 digit Emp. No. (required) and name (optional), and click Next Next Add users Next Employee No.
Recognition Mode Face The registered user enters the photo to enable the face recognition mode and then conducts face recognition in the main interface. Card The registered user enters the card number to enable the card mode and then swipes the card in the swiping area of the main interface. Password The registered user enters the password to enable the password mode, clicks (Key) in the main interface to enter the password interface, and then enters the Emp.No. & password.
Clock-in Records 1 Click (Records) to enter the records interface 2 Click to enter the directory Set Attendance Records User Mgmt.
CE Caution: Use the Product in the environment with the temperature Between -10℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude For the following equipment: Product Name: FACE RECOGNITION TERMINAL Brand Name: Model No.: K32-1901-OS-TDC, K32-1901-OS-T Universal Ubiquitous Co.,Ltd. E-mail: wangjianhao@uni-ubi.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
