Directory USB Client User Manual Before You Start………………………………………2 Software Installation……………….…………………3 Hardware Installation………………………..……….5 Configuration………………………………...……..…7 Regulatory Statement………………………..……....
USB Client User Manual Please follow the procedure to use this manual. Before You Start Please check USB client package content: • A USB Client • • A Stand A USB Client driver Install software before hardware installation. Software Installation Insert the CD-ROM, and it auto-runs. You need to install the software before hardware installation.
Click “Next” to continue the installation. . Click “Continue Anyway” to continue the setup.
After you click “Next”, the system will start to install the program as the following picture shows. Click “Finish” to complete the installation.
Hardware Installation Please plug the USB client to the Stand socket and the other end of the Stand cable to the USB socket of your computer. For Windows XP users, the system detects a new device when you plug the cable into the USB socket. Just follow the system’s instruction to add a new device.
The system will show a Hardware Installation dialog window. Please click “Continue Anyway” to continue the installation. After the steps, please click “Finish” to complete the installation.
Configuration To connect the wireless network, please do the following steps: 1. Cancel your browser’s proxy setting. Open your browser and click Tool Internet OptionsConnections LAN SettingsUnpick Proxy setting as the following figure shows. 2. Change your network setups. Select “WPA” and “AES”.
Move the cursor to and double click the mouseClick “Property” double click Wireless Networks select “WPA” and “AES”. 2. Change your TCP/IP setups. Tick “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Go back to Internet Protocol (TCP/IP) and double click tick “Obtain an IP address automatically” and “Obtain DNS server address automatically”. 3. After both software and hardware installation, your USB Client connects wireless network automatically.
Regulatory Statement Technical Support Universal Scientific Industrial Co., Ltd. Address : 141, Lane 351, Taiping Road, Sec. 1, Tsao Tuen, Nan-Tou, Taiwan Tel : + 886-49-2350876, 2325876 Fax : +886-49-2329561, 2337360 E-mail : usi@ms.usi.com.tw Technical Support in the US Address : 3590 Peterson Way, Santa Clara, CA 95054, USA Tel : +1-408-986-6589 Fax : +1-408-432-0440 E-mail : alex_lee@ms.usi.com.tw ; altliao@ms.usi.com.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.