User's Manual

USB Client
Quick Start Flyer
5.
Set Network Name & Security Settings
1.
Verify Kit Contents
6.
Install Driver & Client Manager
If the CD-ROM does not start automatically, consult
the section Troubleshooting.
Select Install New Product.
2.
Insert CD-ROM
Follow the instructions on your screen.
7.
Connect USB Client Hardware
a. Enter the Network Name of the wireless network.
b. (If required) Adjust Security Settings.
3.
Install Software before Hardware
8.
Start using your Wireless Network
4.
Select Identify Settings
a. Use this button to return to the first page.
b. Use this button to display the table of contents.
c. Select this link to find more information.
Troubleshooting
If the CD-Wizard does not start automatically:
a. Click the Start button on the Windows task bar
and select Run.
b. Type "d:\ezsetup.exe", and click OK
(where d:\ represents the drive letter of your CD-
ROM drive).
If you have other problems installing or using this
product:
a. Consult the section “Find Information“ on the CD-
ROM (described on the previous page).
b. Consult the “readme.txt“ file on the CD-ROM.
c. Contact your hardware Reseller or Manufacturer.