Quick Reference TP7500X TeamPad FHT681A1A, FHT682A1A FHT681B1A, FHT682B1A FHTLA681 TP7500X Quick Reference
Contents Welcome and What’s in the Box .......................................................2 Safety Information ......................................................…...................2 To Avoid ..............................................................…….…..................2 Lithium Battery Notice....................................................……….........2 Chapter 1 Introduction ...........................................................…........3 Features ....................................
FCC ID: IXMTP7500W FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Welcome and What’s in the Box This section lists the contents of your TP7500X TeamPad package and provides a overview of this user’s guide. The TP7500X package includes the following items: TP7500X wireless digital assistant (includes stylus and one replaceable 4400mA battery) AC adapter TP7500X quick reference Safety Information To Avoid Never connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical danger.
Chapter 1 Introduction Features This section provides an overview of the TeamPad hardware specification and preinstalled software. Dimension Height: 25 mm Width: 285 mm Depth: 205 mm Weight 1000grams Microprocessor Intel PXA-255 400MHz 32-bitCPU. Memory 1. Flash memory: 64MB Flask memory can be customer-specified up to 128MB. (User accessible is around 32 MB for 64 MB Flash, 32 MB + 64 MB for 128MB) 2. SDRAM: SDRAM can be customer-specified and could be 64MB up to 128MB on board.
CF Card Slot Standard Type II CF Card slot Buttons 1. Power On/Off button 2. Backligh control key 3. 4 programmable function hot key buttons 4. 10 numeric keys and and ENT/CLS/BKS keys 5. 4 direction keys Audio 1. Audio record and playback 2. One speaker, one headphone jack, One integrated microphone Interface and I/O Ports 1. Headphone output jack 2. AC/DC power jack 3. Cradle Connector: (1). Auxiliary AC/DC power input (2). 2 USB Host Ports (3). USB client for sync with desktop PC 4.
Indicators A two color LED is used to indicate the power status. It also could be controlled by the S/W to indicate some information like the warning or alarm. 1. Green: On mode : resume proecess Suspend process Boot process Suspend /OFF: On charging 2. Red: On mode : SMBus I/F error Operating System Microsoft Windows CE.NET 4.2 OS Application Software 1. RDP 2. Pocket Word/Excel 3. Pocket Internet Explorer 6.0 4. Windows Media 9X 5. Pocket Inbox Power Management 1. Instant On/Off by the power button 2.
Regulatory Approval EMI: CE Mark, FCC Part 15 Class B digital device, VCCI Class B, CISPR22 Class B, EN55022 Class B Safety: UL, CSA950, EN60950, Category A of Electric Appliance and Material control low of Japan Environment Requirement 1. Operating Temperature: 0℃ to 40℃ 2. Storage Temperature: -20℃ to 60℃ 3. Low Pressure (Altitude): a. Operating : 0-10,000 ft b. Storage : 0-40,000 ft c. Operating : 0-10,000 ft d.
Chapter 2 Getting Started Exploring Your TeamPad (Picture here) 1. Locating Front Panel Controls 1. PCMCIA slot : Type II slot 2. Serial port : RS232C 1 port 3 Stylus : Use the stylus to navigate on the touch screen 4. Battery : Li-ion Battery Pack 7.2V 5. DC Jack 6. USB connector & cover :Connect your desktop PC using the supplied cradle, or an optional sync cable. 7. Audio 8. CF slot 9. TeamPad hot key : Press to launch an application or programmed function. 10. Cradle interface 11. Speaker : Speaker.
2. Locating Back Panel Components 14. 15. 17. Batter Pack connector : Batter cell connect with Main Unit. 18 Reset Button 19 Compat Flash 20. Removable battery. It can be 2200mA battery. 21. Battery lock. Press the lock down to put your battery then press the lock up to lock battery. 22. Serial port cover: 23. PCMCIA slot cover : 24. Strap Lock I 25. Strap Lock II 26. Battery Lock S/W. 27. Power off S/W 28. Backup battery 29. CF Slot II 30.
Powering Your TeamPad 1. Main Battery The main Li-Ion 4400mA battery provides power to your TeamPad while it is not connected to AC power. Under typical usage condition of not using the back-light, the fully charged main battery should provide power for up to 6 hours of use.Battery life will vary depending on how you use your TeamPad. For example, such as listening to music, operating CompactFlash cards or using full brightness or considerable power charging may reduce this time significantly. 2.
3. Powering Your TeamPad The First Time You Charge Your TeamPad Do not disconnect your TeamPad from AC adapter or cradle until the power green LED indicates that the main battery is fully charged. You could connect AC adapter to a wall socket, and then connect the other enc to the DC jack on your TeamPad.
Connecting to Your Desktop PC PC via USB cable by the steps below. Stick the end of USB connector to the USB port on your PC and another end stick to the USB port bottom of your TeamPad You could also stick your TeamPad to supplied cradle then connect the USB type B connector rear of cradle to USB client port on desktop.
