WCFM-100 Card Pocket PC 2003, WinCE 4.2 Pocket PC 2005, WinCE 5.0 Quick Installation Guide Guide d'Installation Rapide Kurzanleitung zur Installation Guida Rapida all’Installazione Guía de Instalación Rápida Version 1.
Table of Contents English 1.Before Setup CF Card on your PC......................................................................................... 3 2. Setup Procedure .................................................................................................................... 3 Français 1. Vor dem Installieren der CF-Karte in Ihren.......................................................................... 6 2. Installationsvorgang....................................................................
1.Before Setup CF Card on your PC In order to setup WCFM100 driver into PDA, you must have Microsoft ActiveSync software available on your computer and make sure the computer is synchronised with PDA then transfer WCFM100_v5.0.10.0 _27.p3.exe (which also can be download from SparkLAN support website) program from your computer to PDA. The driver can be transferred via Active Sync into your PDA or save into storage device such as CF (Compact Flash) or SD (Secure Digital) card that can be used in PDA device.
FCC Regulations: zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
4RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
1. Vor dem Installieren der CF-Karte in Ihren Zum Installieren des WCFM100-Treibers in den PDA muss in Ihrem Computer eine Microsoft ActiveSync-Software vorhanden sein. Sicherstellen, dass Ihr Computer mit dem PDA synchronisiert ist. Danach das WCFM100_v5.0.10.0 _27.p3.exe-Programm (welches auch von der SparkLAN-Support-Webseite heruntergeladen werden kann) von Ihrem Computer zum PDA übertragen.
versuchen Sie es erneut. 1. Avant d'Installer la Carte CF sur votre PC Afin d'installer le pilote WCFM100 dans votre PDA, vous devez vous assurer d'avoir le logiciel Microsoft ActiveSync disponible dans votre ordinateur, que votre ordinateur est synchronisé avec le PDA, puis transférer le programme WCFM100_v5.0.10.0_27.p3.exe (également téléchargeable à partir de la section support du site SparkLAN) depuis votre ordinateur vers votre PDA.
1. Prima di Installare CF Card Sul Vostro computer Per poter installare il driver WCFM100 nel PDA, dovete avere il programma Microsoft ActiveSync disponibile nel vostro computer ed assicurarvi che sia sincronizzato con il PDA, quindi effettuare il trasferimento del file WCFM100_v5.0.10.0_27.p3.exe (che può anche essere scaricato dal sito WB di supporto SparkLAN) dal vostro computer al PDA.
1. Antes de instalar la tarjeta CF en su PC Para instalar el controlador de la WCFM100 en la PDA, usted debe tener el software Microsoft ActiveSync disponible en su ordenador y asegurarse que el ordenador esté sincronizado con el PDA; luego transfiera el programa WCFM100_v5.0.10.0_27.p3.exe (el cual también puede ser descargado del sitio Web de soporte de SparkLAN) desde su ordenador al PDA.
The equipment has been tested and found to comply with FCC and CE Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada Statement Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.