User's Manual

ManualsBrandsUniversal Scientific Industrial ManualsElectronicsBLUETOOTH 2.0+EDR USB MODULE

All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.

Data Sheet

March

200

Rev

1.0

Bluetooth 2.0+EDR USB module

(

)

Introduction

The Bluetooth Class 2 Module (model number

BM-GP-CS-08A) is a small module with 10-

way connector that provides a complete

2.4GHz Bluetooth system. This ready-to-use

Class2 Bluetooth module provides a fully

compliant Bluetooth system V2.0+EDR for

data and audio communications.

This module also provides the coexistence

solution that is critical for Notebook

implementation. The coexistence solution

includes AFH, and Activity Signaling (CSR

coexistence solution), WCS (Wireless

Coexistence Solution). AFH and Activity

Signaling is the default setting.

This module is provided with Toshiba PC stack

for Windows XP.

The module is ideally for Notebook PC, Table

PC and UMPC.

www.usi.com.tw

Features

 Fully Qualified Bluetooth v2.0 system

 Enhanced Data Rate(EDR) compliant

for both 2Mbps & 3Mbps modulation

modes

 With small size suitable for compact

system integration. Low power

consumption, extend the battery life.

 Support for 802.11b/g Coexistence

including Intel WCS (Wireless

Coexistence System) (Optional).

 Integrated Printed Antenna

 On board 8 Mbits flash memory for

firmware upgrade

格

格格

格式化

式化式化

式化:

項目符號及編號

格

格格

格式化

式化式化

式化:

項目符號及編號

Summary of content (11 pages)

PAGE 1
Bluetooth 2.0+EDR USB module (BM-GP-CS-08A) Data Sheet www.usi.com.tw March 2006 Rev 1.0 Introduction The Bluetooth Class 2 Module (model number BM-GP-CS-08A) is a small module with 10way connector that provides a complete 2.4GHz Bluetooth system. This ready-to-use Class2 Bluetooth module provides a fully compliant Bluetooth system V2.0+EDR for data and audio communications. This module also provides the coexistence solution that is critical for Notebook implementation.
PAGE 2
Bluetooth USB Module (BM-GP-CS-08A) General Description Features Description TM Standards Frequency Band Sensitivity Output Power Fully compliant with Bluetooth 2.0+EDR Standard 2.402GHz ~ 2.480GHz -82 dBm 4 dBm max with power control (Maximum Power measurement is from chip set) Type A: Average gain: -2.95dbi @2.45GHz (max) Type B: Average gain: -4.4dbi @2.45GHz (max) 10m ~20m (Varies depending on operating environment) Operating temperature: 0 °C to +70 °C Storage temperature: -40 °C to +85 °C 3.
PAGE 3
Bluetooth USB Module (BM-GP-CS-08A) Block Diagram Figure 2: Module Block Diagram Electrical Characteristics Absolute Maximum Ratings Rating Storage Temperature Supply Voltage: VDD Min Max -40 °C -0.40V +85 °C +3.60V Recommended Operating Conditions Operating Condition Min Operating Temperature Range* 0 °C Supply Voltage: VDD +3.0V Max +70 °C +3.60V All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 4
Bluetooth USB Module (BM-GP-CS-08A) Input/Output Terminal Characteristics Digital Terminals Min Typ Max Unit -0.4 0.7VDD - +0.8 VDD+0.4 V V - 0.2 V - - V Min Typ Max Unit 0.7VDD - 0.3VDD - V V VSS < VIN< VDD CI Input capacitance -1 2.5 1 - 5 10 µA pF Output levels to correctly terminated USB Cable VOL output logic level low VOH output logic level high 0 2.8 - 0.2 VDD V V Input Voltage VIL input logic level low (VDD=3.
PAGE 5
Bluetooth USB Module (BM-GP-CS-08A) Radio Characteristics Radio Characteristics, VDD = 3.3V Temperature = +20°C Frequency (GHz) Min Typ Max 2.402 2.441 2.480 2.402 2.441 2.480 0 0 0 -82 -84 -84 - -78 -80 -80 - Frequency (GHz) Min Typ Max 2.402 2.441 2.480 2.402 2.441 2.
PAGE 6
Bluetooth USB Module (BM-GP-CS-08A) Radio Characteristics, C/I and Adjacent Channel Power VDD = 3.
PAGE 7
Bluetooth USB Module (BM-GP-CS-08A) Mounting Guide for Antenna Radiation In order to achieve longest communication range, please keep the area surrounding antenna free of grounding or metal housing. All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 8
Bluetooth USB Module (BM-GP-CS-08A) Impedance Matching of Antenna BM-GP-CS-08/A/B utilizes a meander line printed antenna for radiate communication. Application environments, such as notebooks, PDAs, headsets or other handheld devices, both have plastic housings, different motherboards and other mechanism structures. These factors will cause the deviation of antenna resonant frequency.
PAGE 9
Bluetooth USB Module (BM-GP-CS-08A) Mechanical Drawing All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.
PAGE 10
Bluetooth USB Module (BM-GP-CS-08A) Label Information First line: USI and Date code. The first two digits of date code is the year and last two digits are the week number. The date code is used to identify the production date. Second line: The part numer which may have different information. Third line: The MAC address. WARNING: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
PAGE 11
Bluetooth USB Module (BM-GP-CS-08A) Packaging For Additional information, please contact the following: Universal Scientific Industrial Co., Ltd. Headquarters 141, Lane 351, Taiping Road, Sec. 1, Tsao-Tuen , Taiwan, Http://www.usi.com.tw Tel: + 886-49-2350876, 2325876 Fax: +886-49-3439561, 2337360, 2351093 E-mail:usi@ms.usi.com.tw All rights are reserved by USI. No part of this technical document can be reproduced in any form without permission of USI.