Owner's Manual SNP-2 Streaming Network Music Player
SNP-2 Owner’s Manual ©2014 Universal Remote Control, Inc. The information in this Owner’s Manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this Owner’s Manual may be subject to change without prior notice.
TABLE OF CONTENTS Congratulations! 1 Features and Benefits 1 Parts Guide 2 Front Panel Description 3 Rear Panel Description 4 Installation 5 Navigation 8 Music Services 11 Settings 15 Specifications 28 Federal Communication Commission Interference Statement 29 Limited Warranty Statement 30 End User Agreement 32
SNP-2 STREAMING NETWORK PLAYER Congratulations! Thank you for purchasing the SNP-2 Streaming Network Music Player! Listen to popular music services like Rhapsody, Pandora, vTuner, and SiriusXM, as well as your stored music via My Music or Windows Media Player. Integrate the SNP-2 with a Total Control system to listen throughout your home or office, or listen in your room as a standalone device using Complete Control products.
SNP-2 STREAMING NETWORK PLAYER Parts Guide The SNP-2 Streaming Network Player includes: 1 - SNP-2 Streaming Network Player 1 - Power Cord 1 - Owner’s Manual Page 2 1 - AC Power Adapter 1 - Ethernet Cable
SNP-2 STREAMING NETWORK PLAYER Front Panel Description Ethernet Reset Power Power LED: Indicates the SNP-2 is connected to power. Ethernet LED: Indicates the network connectivity status. ● ON = Connected ● OFF = Not Connected ● Blinking = Attempting to connect Reset Button: The front panel reset button offers a quick way to power cycle or reset the SNP-2 back to its factory state. ● Power Cycle: Press to turn the unit OFF then back ON again while retaining your music account information. (Ie.
SNP-2 STREAMING NETWORK PLAYER Rear Panel Description Power LAN Control IR IN Coaxial HDMI Output Analog Audio Power 12V (3.5A): The power socket accepts either UL/CSA approved 110V power cords or CE approved 220V power cables to be used with the power supply. The power supply automatically switches when connected to either 100V or 240V. LAN: A 10/100 LAN connection ensures that the SNP-2 sends a network stream to the DMS amplifiers.
SNP-2 STREAMING NETWORK PLAYER Installation Total Control Interface View Only (Streaming Audio Device) The SNP-2 can be used as a streaming audio device in up to 32 zones by broadcasting its proprietary audio signal over the local area network to the Total Control system. The signal is then received by a DMS-100, DMS-1200 or a DMS-AV, all while the user controls the music selection from one of the Total Control interfaces like the TRC-1080. TRC-1080 1.
SNP-2 STREAMING NETWORK PLAYER Hybrid Total Control System While the SNP-2 is streaming over the network, its interface can be viewed and controlled via an HDMI display such as a television or an audio/video receiver. TRC-1080 1. Plug the power cord into the rear of the SNP-2 and the other end into a power outlet. 2. Plug the Ethernet RJ45 cable to the LAN port in the rear of the SNP-2 and plug the other end into an available port of a MFS-8 or router. 3.
SNP-2 STREAMING NETWORK PLAYER Standalone Operation The SNP-2 also functions without a Total Control system, by simply adding a URC Complete Control RF base station and RF remote control. MX-780 1. Plug the power cord into the rear of the SNP-2 and the other end into a power outlet. 2. Plug the Ethernet RJ45 cable to the LAN port in the rear of the SNP-2 and plug the other end into an available port of a MFS-8 or router. 3. Connect an HDMI cable to the rear of the SNP-2 and an HDMI TV. 4.
SNP-2 STREAMING NETWORK PLAYER Navigation Music Menu The SNP-2’s on-screen interface displays a title bar, music services and recent stations or tracks. Navigate all screens using any of the Total Control interfaces, such as a TRC-1080 or a compatible mobile device using the Total Control Mobile app. Music Services Ribbon Title Bar Quick Selection List Title Bar The Title Bar is available on all SNP-2 screens and displays the Title, Date and Time, Title Name and Now Playing metadata.
SNP-2 STREAMING NETWORK PLAYER Music Service The Music Service options will vary per service and provide specific categories for you to browse. However, navigating with the directional arrows remains the same. Music Service Options Alpha Index Menu/ Music Menu Button Music Service Options Use the Left, Right, Up and Down navigation buttons to move to the next icon. Pressing the CH+ and CH- buttons will quickly scroll through a list.
SNP-2 STREAMING NETWORK PLAYER Now Playing The Now Playing screen displays the song information, options bar and the transport functions. These buttons will vary based on each music service however navigating with the directional arrows remains the same. Song Information Options Bar Transport Buttons Song Information This area displays the current song, song time, artist, album and album art, when available from the music provider.
SNP-2 STREAMING NETWORK PLAYER Music Services The SNP-2 offers access to popular streaming music services, stored music and favorites. You can sign in or register to use streaming services such as vTuner, SiriusXM, Rhapsody, and Pandora. You can also access and play your stored audio using My Music and Windows Media Player. Save your favorite radio stations or songs to quickly access them from the Favorites icon on the main menu.
SNP-2 STREAMING NETWORK PLAYER SiriusXM Login and access up to 165 + channels of satellite radio (dependent on subscription level) and browse through featured shows like Howard Stern and Oprah, channels, categories or show name. For further details, refer to the SiriusXM user guide at www.universalremote.com. Rhapsody Login and access Rhapsody’s internet radio music collection of more than 16 million tracks. Select from individual tracks, an album, playlist or radio stations.
SNP-2 STREAMING NETWORK PLAYER Pandora Create up to 100 unique radio stations while Pandora tailors your music selections based on your likes and dislikes. For further details, refer to the Pandora user guide at www.universalremote.com. vTuner Instantly access local, national, or global radio stations of varying genres without needing a username or password. For further details, refer to the vTuner user guide at www.universalremote.com.
SNP-2 STREAMING NETWORK PLAYER Windows Media Player Access and listen to your playlist’s created using Windows Media Player. For further details, refer to the Windows Media Player user guide at www.universalremote.com. Favorites Quickly access up to 120 favorite radio stations, tracks or playlists from any service directly from the main menu. For further details, refer to the Favorites user guide at www.universalremote.com.
SNP-2 STREAMING NETWORK PLAYER Settings The Settings screen provides access to the many options shown below. Use the navigational up/down arrows to scroll through the list and press the Enter button to make a selection.
SNP-2 STREAMING NETWORK PLAYER Account Setup The Account Setup menu allows you to enter the customer’s username and password for each music service. Select one of the music services to setup the account. Setup a music service by saving the customer’s username and password for quick access. Select Go Back to return to the previous screen. Pandora Account Setup Enter the customer’s username and password, then validate the information to access the service.
SNP-2 STREAMING NETWORK PLAYER Rhapsody Account Setup Enter the customer’s username and password, then activate the account to access the service. SiriusXM Account Setup Enter the customer’s username and password, then validate the account to access the service.
SNP-2 STREAMING NETWORK PLAYER My Music Manager The My Music Manager menu allows for locating and managing the stored media on the local area network. Select Go Back to return to the previous screen. Shared Folder Manager Displays available shared drives on your network. A username and password maybe necessary to access a shared drive.
SNP-2 STREAMING NETWORK PLAYER Scan for Media Now This option will search your shared folders for new media while you are using the SNP-2 and automatically return you to the previous screen. Automatic Media Scan Schedule Setup a time for the SNP-2 to automatically locate newly added media.
SNP-2 STREAMING NETWORK PLAYER Artist Display Sorts the shared media by album artist or artist. Compilation Sort Sort compilations by album artist or like iTunes (Artist, Album Name, then Tracks).
SNP-2 STREAMING NETWORK PLAYER Hide/Show Services Hide or show the listed services on the main screen by checking its associated box. Use the remote’s navigational Down arrow to access more music services. Select Go Back to return to the previous screen.
SNP-2 STREAMING NETWORK PLAYER Audio Setup The SNP-2’s setup will determine whether or not the audio settings can be modified. The audio options will NOT be available, if your custom professional has integrated the SNP-2 with the Total Control system and a DMS unit. However, the audio options will be available, if the SNP-2 is setup as a standalone music source. The SNP-2 default audio output is set to a bit rate of 16 bit/44.1K.
SNP-2 STREAMING NETWORK PLAYER Video Setup Choose the Video Output Resolution, based on your display device and region, either 720p 60Hz or 720p 50Hz. Select Go Back to return to the previous screen.
SNP-2 STREAMING NETWORK PLAYER Date and Time Manually set the SNP-2’s date and time by month, day, year, hour minute and AM/PM. Select Go Back to return to the previous screen.
SNP-2 STREAMING NETWORK PLAYER Network Properties and Setup Setup the SNP-2 with either a DHCP or Static IP address and view it’s network information. ● Set SNP-2 to DHCP (Default) Setting to DHCP will automatically communicate to the system’s router to be assigned an IP address. ● Set SNP-2 to Static IP When Static IP is selected, an IP address must be manually entered, as well as the information for the subnet mask, default gateway and DNS server.
SNP-2 STREAMING NETWORK PLAYER Screen Saver This option lets you specify the amount of time before a screen saver will begin when the unit is not in use and how long the screen saver will cycle to the next image. ● Screen Saver Time Select from Never up to 20 minutes for the screen saver to begin. ● Screen Saver Cycling Also select from 7, 15, 30, or 60 seconds to cycle between images. Select Done to save your settings. Select Go Back to return to the previous screen.
SNP-2 STREAMING NETWORK PLAYER About SNP-2 View the unit’s firmware and hardware versions. Ensure the unit has the latest versions by checking for available firmware updates. Select Go Back to return to the previous screen..
SPECIFICATIONS Specifications Mood Lamp (White): 4 Station Dimming (Off . Min . Mid . Max) Power LED (Blue): Power Status Ethernet LED (Blue): Network Status Reset Button: System Reset Power: 12V/3.5A (Do Not USE 48V for MFSPOE-8) Ethernet: One 10/100 RJ45 port (Indicator 2 LED) HDMI: 1.
SNP-2 STREAMING NETWORK PLAYER Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARRANTY Limited Warranty Statement 1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for two (2) years from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery.
WARRANTY SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE.
WARRANTY URC’s PC programmable remotes or any of our Total Control® whole-house equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total Control® whole-house equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either. 2.
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.