P-965 A/V Tuner Pre Amplifier
Introduction ENGLISH READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CONTENTS READ THIS BEFORE OPERATING YOUR UNIT • System Connections | 4 • Front Panel Controls | 13 ENGLISH • Introduction | 2 • Universal Remote Controls | 15 OPERATING COMPONENTS WITH REMOTE CONTROL REMOTE CONTROL OPERATION RANGE | 18 LOADING BATTERIES | 18 ENTERING A SETUP CODE | 19 | 18 • ROOM 2 Remote Controls REMOTE CONTROL OPERATION RANGE LADING BATTERIES | 21 | 21 • Operations LISTENING TO A PROGRAM SOURCE | 22 SURROUND SOUND | 25 ENJOYING SURROUND SOUND | 28 LISTENING TO RADIO BROADCAST
ENGLISH System Connections • Pleas be certain that this unit is unplugged from the AC outlet before making any connections. • Since different components often have different terminal names, carefully read the operating instructions of the component connected. • Be sure to observe the color coding when connecting audio and video cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the unit.
2. CONNECTING AUDIO COMPONENTS AUX CD recorder, MD recorder, etc. TAPE MONITOR Tape deck, MD recorder, etc. L AUDIO R IN L AUDIO R OUT AUX OUT AUDIO L IN R AUDIO L OUT R TAPE OUT AUX CD CD player, etc. TAPE PHONO Turntable with MM type cartridge L AUDIO R OUT CD GND GND AUDIO L OUT R PHONO R L • The TAPE MONITOR IN/OUT jacks may also be connected to the LINE OUT/IN jacks of an optional graphic equalizer. 3.
VIDEO 2 DVD player, DVD recorder, etc. VIDEO 1 Video deck, DVD recorder, etc.
• The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to CD, AUX and VIDEO 1~ VIDEO 6 of this unit can be connected to these DIGITAL INs. • A digital input should be connected to the components such as a CD player, LD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc.
ENGLISH 5. CONNECTING 8CH DIRECT INs • Use these jacks to connect the corresponding analog audio and video outputs of a DVD player or a external decoder , etc. that has 6 , 7 or 8 channel audio and video outputs. • In case of 6 or 7 channel outputs , do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input to this unit . (For details, refer to the operating instructions of the component to be connected.
Speaker placement ENGLISH Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : ■Front left and right speakers and center speaker • Place the front speakers with their front surfaces as flush with TV or monitor screen as possible. • Place the center speaker between the front left and right speakers and no further from the listening position than the front speakers.
7. CONNECTING SYSTEM CONTROL • Connect this jack to the DIGI LINK jack of the external Sherwood component that uses the DIGI LINK II or III remote control system. Sherwood component with DIGI LINK II or III DIGI-LINK ENGLISH CD player Tape deck System control cord DVD player 8.
• The multi-room system kit(sold separately ) is essential for operation from a remote location . For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com. • IR IN jacks allow you to control this unit from another room with the remote control unit. • To control this unit from another room with the remote control unit, connect the IR IN 1 or 2 jack to the output of the connecting block.
ENGLISH 10. CONNECTING PC FOR UPGRADES • This unit incorporates USB as well as RS-232C terminal that may be used in the future to update the operating software so that it will be able to support new digital audio formats and the like. • Connect either USB or RS-232C terminal to your PC(You don’t need to do both). RS-232C USB PC with USB or RS-232C port OPR. SVC.
Front Panel Controls 14 ENGLISH 13 MASTER VOLUME MULTI CONTROL 12 11 INPUT SELECTOR POWER STANDBY DECODING STEREO DIGITAL/ANALOG PURE AUDIO VIDEO AUDIO T.MON 8CH DIRECT 1 ON/ OFF 15 A/V TUNER PRE AMPLIFIER P-965 2 3 4 5 6 7 20 21 22 23 8 9 10 • To open the panel door, push gently on the lower third of the panel door. 16 17 18 H VS CH.
FLUORESCENT DISPLAY ENGLISH 1 2 3 4 5 6 7 8 DOLBY H DIGITAL EX VIRTUAL DIRECT AUTO L C R PCM PRO LOGIC MPEG PURE SOUND TAPE MON STEREO ANALOG DIGITAL RE-MASTERING 3 9 DTS ES 96/24 NEO:6 RDS EON TA PTY Z TUNED TP PRESET VIDEO SET 123456 R2 MUTE CINE-EQ MEMORY 20 21 22 23 AP-SW 24 SL SW SR LFE SB 12 11 13 14 1. CHANNEL indicators 2. PCM SIGNAL indicator 3. SURROUND MODE indicators 4. TAPE MONITOR indicator 5. DIRECT indicator 6. STEREO indicator 7. AUTO indicator 8.
This universal remote control can operate not only this unit but also most popular brands of audio and video components such as CD players, DVD players, tape decks, TVs, VCRs, satellite units, cable boxes, etc. • To operate 8 components other than this unit, you should enter the setup code for each component. (For details, refer to “ENTERING A SETUP CODE” on page 19) • The numbered buttons on the remote control have different functions in different device modes.
FUNCTION TABLE of the NUMBERED BUTTONS. Device to be controlled Button symbol AUDIO 1("AUD1") AUDIO 2("AUD2") CD TAPE TV (for receiver, "001") (for receiver, "001") (for CD player, "001") (for tape deck, "001") (for TV, "001") POWER ON POWER ON POWER ON STANDBY STANDBY STANDBY ENGLISH POWER ON STANDBY CHANNEL SELECTOR CHANNEL SELECTOR CH.
Continued Device to be controlled Button symbol DVD(for DVD player) V-768, etc.("001") VD-4106, etc.("091") VD-8300, etc.("116") POWER ON POWER POWER STANDBY - - - - DIGEST - - - - - - - VOLUME UP( - - VOLUME DOWN( - - - PLAY PLAY PLAY/PAUSE FORWARD SKIP FORWARD SKIP FORWARD SKIP REVERSE SKIP REVERSE SKIP REVERSE SKIP FORWARD SEARCH FORWARD SEARCH FORWARD SEARCH REVERSE SEARCH REVERSE SEARCH REVERSE SEARCH STEP ENGLISH POWER ON STANDBY CH.
ENGLISH OPERATING COMPONENTS WITH REMOTE CONTROL REMOTE CONTROL OPERATION RANGE Enter the setup code of the components respectively, referring to “ENTERING A SETUP CODE” (page 19). 1 • Use the remote control within a range of about 7 meters (23 feet) and angles of up to 30 degrees aiming at the remote sensor. Turn on the components you want to operate.
• This remote control can control up to ten different components. • Before operating audio and video components using the remote control supplied with this unit, the setup code for each component should be entered. • For system remote control operation between Sherwood components, “001” was stored previously in the memory of each device such as “AUD 1” and “AUD 2” for this unit, “CD” for CD player, “TAPE” for tape deck , “TV” for TV and “DVD” for DVD player.
Enter the 3 digit setup code aiming the remote control at the REMOTE SENSOR on the component. ENGLISH 7 8 Confirm that it is the right code by selecting the SAVE. POWER ON STANDBY AUD 1 001 SAVE EXIT DOWN POWER ON STANDBY UP ENTER PAGE AUD 1 FAV MAIN 001 SAVE CH.
This remote control unit is an additional remote control unit for the ROOM 2 source playback only. • You can use the ROOM 2 functions with this remote control unit more conveniently in another room than with the universal remote control unit. REMOTE CONTROL OPERATION RANGE • Aim the ROOM 2 remote control(or the universal remote control) at the IR receiver installed in another room.(For details, refer to “CONNECTING MULTI-ROOM SYSTEM KIT” on page 11.
ENGLISH Operations Notes : • Before operating this unit with the supplied remote control, refer to “ Universal Remote Controls” on page 15 for details about operation. • Before operating this unit, first set this unit as desired for optimum performance, doing the OSD menu setting procedures. (For details, refer to “OSD Menu Settings” on page 44.) LISTENING TO A PROGRAM SOURCE Select the desired input source. Before operation • Enter the standby mode. 3 POWER • The STANDBY button lights up in amber.
When CD, AUX or VIDEO 1~ VIDEO 6 is selected Select the tone mode as desired. 7 Select the digital or the analog input as desired. TONE MODE POWER ON STANDBY ENGLISH 4 Adjusting the tone (bass and treble) DIGITAL/ANALOG AUD2 SLEEP or D/A DIMM S.A/B ROOM2 SUR.B T.TON PURE OSD PARA.
ENGLISH Achieving higher purity of sound quality Compensating for edgy or shrill movie sound tracks POWER ON STANDBY PURE AUDIO AUD2 SLEEP or S.A/B ROOM2 SUR.B T.TON PURE OSD CINEMA EQ D/A DIMM PARA. PAGE1 • Only when playing program sources recorded in either analog stereo or 2 channel PCM format, the pure audio function can be selected.
SURROUND SOUND Surround modes ■DTS Digital Surround DTS Neo : 6 Cinema This mode is optimum for playing movies. Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2-channel sources as with 6.1-channel sources. DTS Digital Surround(also called simply DTS) is a multichannel digital signal format which can handle higher data rates than Dolby Digital. Although both Dolby Digital and DTS are 5.
ENGLISH ■Dolby Pro Logic IIx surround ■Dolby Virtual Speaker Dolby Pro Logic IIx decodes all stereo (2 channel ) and 5.1 channel sources and extends to 7.1channel surround playback. It delivers the most natural, full range and immersing 7.1 channel listening experience. Dolby Pro Logic IIx surround includes three modes as follows : This mode creates a virtual surround sound field using as few as two front speakers, allowing you to experience listening from 5.1 channel speakers.
For your reference, the sound from each channel can be reproduced according to the surround modes as follows: Channels FRONT L/R CENTER SURROUND L/R SURROUND BACK L/R SUBWOOFER — DTS, DTS 96/24 DTS ES DISCRETE/MATRIX —(*) DTS NEO 6: CINEMA/MUSIC — DOLBY DIGITAL DOLBY DIGITAL EX —(*) DOLBY PRO LOGIC IIx MOVIE/MUSIC/GAME DOLBY PRO LOGIC II MOVIE/MUSIC/GAME — —(*) DOLBY VIRTUAL SPEAKER — —(*) MPEG — 4CH STEREO — — —(*) Other Surrounds STEREO —(*) — — — —(*) 8 CH DIRECT (*): Depend
ENGLISH ENJOYING SURROUND SOUND • Surround sound effect will not work properly if the signal passes through a graphic equalizer. Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer. Note: Before surround playback, first perform the SPEAKER SETUP procedure, etc. on the OSD menu for optimum performance. (For details, refer to “SETTING THE SPEAKER SETUP” on page 46.) Depending on the input digital signal format, select the desired decoding mode.
Continued ENGLISH To enjoy Dolby Pro Logic IIx surround even while playing in a surround mode. • Select the desired Dolby Pro Logic IIx mode. POWER ON STANDBY PAGE • Each time this button is pressed, the mode changes as follows: FAV MAIN CH.
ENGLISH Listening in a Dolby Virtual Speaker mode • This mode creates a virtual surround sound field using as few as two front speakers, allowing you to experience listening from 5.1 channel speakers. Note : Before using Dolby Virtual Speaker function, first set the speaker layout and virtualization mode as desired.(For details, “When selecting the VIRTUAL SPEAKER SETUP” on page 48.) • While playing in a surround mode, POWER ON STANDBY PAGE FAV MAIN CH.
• The volume level of each channel can be adjusted easily with the test tone function. ■Note: When speakers are switched off , the test tone function does not work. Enter the test tone mode. • The test tone will be heard from the speaker of each channel for 2 seconds as follows: 1 2 SL ( SR Surround Right SC) or ( Surround Left (Surround Center) BL BR) (Surr. Back Left Surr. Back Right) D/A DIMM S.A/B ROOM2 SUR.B T.
Adjust the level of the selected channel as desired. ENGLISH 2 3 Repeat the above steps ① and ② to adjust each channel level. POWER ON STANDBY MULTI CONTROL PAGE FAV MAIN CH.
LISTENING TO RADIO BROADCASTS ENGLISH Select the desired band. Auto tuning 2 Select the tuner. 1 BAND AUDIO POWER ON STANDBY AUD1 TUNER or VID1 CD VID2 T.MON VID3 AUX BAND FREQUENCY VID4 PHONO VID5 • Each time this button is pressed, the band is changed to FM or AM. • When pressing the BAND button without selecting the TUNER, the tuner will be selected automatically. PAGE1 Press the TUNING UP(+) or DOWN(-) button for more than 0.5 second.
Press the (ENTER/) MEMORY button. ENGLISH Manual presetting 2 • You can store up to 30 preferred stations in the memory. POWER ON STANDBY ENTER/MEMO Tune in the desired station with auto or manual tuning. 1 AUD2 or SCH,M E.TA PTY S E.PTY MEMO P.SCA TUNE+ PSET+ TUNE- PSET- PAGE2 • “MEMORY” is flickering for several seconds. Select the desired preset number (1~30) and press the (ENTER/)MEMORY button. 3 PRESET + ENTER/MEMO POWER ON STANDBY 4 AUD2 E.TA SCH.M E.TA PTY S E.
• While listening to FM broadcasts. FM MODE POWER ON STANDBY AUD2 • Each time this button is pressed, the FM mode changes as follows; SCH.M E.TA PTY S E.PTY MEMO P.SCA TUNE+ PSET+ TUNE- PSETPAGE2 Stereo mode : “STEREO” lights up. Mono mode : “STEREO” goes off. • When FM stereo broadcasts are poor because of weak broadcast signals, select the FM mono mode to reduce the noise, then FM broadcasts are reproduced in monaural sound.
RDS Tuner(Regional Option for some countries in Europe, etc.) ENGLISH LISTENING TO RDS BROADCASTS(FM ONLY) RDS(Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following informations. Program Service name(PS), A list of Program Types(PTY), Traffic Announcement(TA), Clock Time(CT), Radio Text(RT).
2 • Use this function to automatically search and receive the stations broadcasting the desired program type. While displaying “PTY SEARCH”, select the desired program type. POWER ON STANDBY 1 In the FM mode, select the PTY search mode. AUD2 SCH.M E.TA PTY S E.PTY MEMO P.SCA TUNE+ PSET+ TUNE- PSETPAGE2 POWER ON STANDBY AUD2 SCH.M E.TA PTY S E.PTY MEMO P.SCA TUNE+ PSET+ • Each time this button is pressed, one of 32 different types of programs is selected.
ENGLISH EON TA DISPLAY • Use this function to automatically search and receive the traffic announcement while listening to traffic program. In the FM mode. POWER ON STANDBY In the TP mode. PAGE FAV MAIN CH. SET CH/ VOL ADJUST MUTE DECODE DSP DSP POWER ON STANDBY DISP AUD2 SCH.M E.TA PTY S E.PTY MEMO P.
• The analog signals from the 8 CH DIRECT inputs as well as the digital signals from DIGITAL inputs or USB can be heard but cannot be recorded. • The volume, channel level, tone(bass, treble) settings, etc. have no effect on the recording signals. Recording with TAPE MONITOR Select the desired input as a recording source except TAPE MONITOR. 1 Start play on the desired input. VIDEO 3 POWER ON STANDBY AUDIO AUD1 TUNER or VID1 CD VID2 T.
4 ENGLISH 3 Start recording on the component connected to VIDEO 1. Start play on the components connected to VIDEO 2 and CD respectively. • The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them on the TV set and from the speakers. • When the VIDEO 2(/ROOM 2) IN/OUT jacks are connected to video recording component such as video deck, etc., in the same manner, recording with VIDEO 2 can be performed.
OTHER FUNCTIONS Adjust the dynamic range as desired. Compressing the dynamic range (Dolby Digital sources only) • This function compresses the dynamic range of previously specified parts of the Dolby Digital sound track(with extremely high volume)to minimize the difference in volume between the specified and nonspecified parts. This makes it easy to hear all of the sound track when watching movies at night at low levels.
ENGLISH Entering a label 2 • This function can be operated on the input sources except TUNER and TAPE MONITOR. 1 Select the desired input source to enter its label. AUDIO 8CH DIRECT LABEL POWER ON STANDBY INPUT SELECTOR VIDEO Press the LABEL button to enter the label input mode. Example ) When selecting VIDEO 1. AUD1 TUNER VID2 T.MON VID3 AUX VID4 PHONO or VID1 CD Confirm your selection. VID5 4 PAGE1 LABEL • You can select “VID 6” or “7.
• This function allows enjoying one source in the main room and playing another in a different room at the same time. • The analog signals from the 8 CH DIRECT inputs and TAPE MONITOR INs cannot be output from the VIDEO 2 / ROOM 2(audio) OUTs, meaning no playback in a different room. • When you connect the multi-room system kit to the IR IN 1 or 2 jack of this unit, you can control this unit with not only the universal remote control unit but also the ROOM 2 remote control unit in a different room, too.
ENGLISH Using the OSD This unit incorporates an OSD(On-screen display) function to provide information about basic operation of this unit and to simplify the setup procedures. The OSD function uses a monitor TV connected to this unit as a display and has two kinds of display modes such as current status display and menu screen. ■Notes: • Any on-screen display shown on the monitor TV will not be recorded. • In some countries, this unit allows you to select either NTSC or PAL color system as video format.
2 Select the desired menu using the CURSOR UP(▲)/DOWN(▼) buttons. POWER ON STANDBY PAGE FAV MAIN CH. SET ENGLISH CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO 1 2 4 5 7 8 3 6 9 OSD/MENU DISP 0 ENT MI M2 M3 Confirm your selection. 3 • The selected category or item will provide the needed setting details using the subsequent screens. POWER ON STANDBY PAGE FAV MAIN CH.
SETTING THE SPEAKER SETUP ENGLISH • After you have installed this unit and connected all the components, you first perform the speaker setup settings for the optimum sound acoustics according to your environment and speaker layout. S P E A KE R SE T UP S P E A K E R C O N F I G U R A T I ON SPEAKER D I STANCE V I R T UA L S P E A K E R SE TUP SUBWOOFER : A C T I V E S U B W O O F E R M O D E : L F E + SW CROSSOVER F R E Q . : 8 0Hz To select the sizes of the speakers that are connected.
ENGLISH 4 Repeat the above steps ② and ③ until the speakers are all set to the desired mode. When selecting the SPEAKER DISTANCE 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the SPEAKER DISTANCE, then press the ENTER button. POWER ON STANDBY SPEAKER DISTANCE PAGE Meters UNIT : FL : 3 . 0 R : 3 .0 C : 3.0 SURR . L : 3.0 SURR . R : 3.0 BL : 3 . 0 R : 3 .0 FAV MAIN CH.
ENGLISH When selecting the VIRTUAL SPEAKER SETUP 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the VIRTUAL SPEAKER SETUP, then press the ENTER button. POWER ON STANDBY VIRTUAL SPEAKER SETUP DOL B Y PAGE CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO 2 4 5 7 8 Off S P E A K E R L AYOUT : 2 - SP E A K E R MO D E : W I DE CH.
6 Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired mode. POWER ON STANDBY PAGE FAV MAIN POWER ON STANDBY ENGLISH 5 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the virtualization mode. CH. SET CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO PAGE 1 2 4 5 7 8 FAV MAIN CH.
ENGLISH When selecting the SUBWOOFER MODE 1 2 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the SUBWOOFER MODE. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired mode. POWER ON STANDBY PAGE FAV MAIN CH. SET POWER ON STANDBY CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO PAGE 1 2 4 5 7 8 FAV MAIN CH.
SETTING THE SYSTEM SETUP To assign the connected DIGITAL INs to the desired input sources respectively. To adjust the tone as desired or to select the desired cinema EQ mode. To set the OSD AUTO DISPLAY mode as desired. To select a video input source. To assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1~6. To select the desired input source that uses the DC trigger 2 function. To select the desired digital re-mastering mode.
ENGLISH When selecting the TONE CONTROL 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the TONE CONTROL, then press the ENTER button. POWER ON STANDBY T ON E C O N T R O L C I N EMA PAGE EQ : Off : Off FAV MAIN CH. SET T ONE DEF E A T CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO 1 2 4 5 7 8 3 6 RETURN: Ba ck 9 OSD/MENU DISP 0 ENT MI M2 M3 , :Se l e c t RNC-510 Note: • When the pure audio function is activated, the TONE CONTROL cannot be selected.
2 • When the OSD AUTO DISPLAY is set to On, the current status display overlaps the program image on the monitor TV and may interfere with your movie enjoyment. In such a case, set the OSD AUTO DISPLAY to Off. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired mode. POWER ON STANDBY PAGE FAV MAIN CH. SET CH/ VOL ADJUST MUTE 1 DECODE Press the CURSOR UP(▲)/DOWN(▼) buttons to select the OSD AUTO DISPLAY.
ENGLISH When selecting the COMPONENT VIDEO SETUP • You should assign the connected COMPONENT VIDEO INs to the desired of VIDEO 1~6. (For details, refer to “CONNECTING VIDEO COMPONENTS” on page 5~6.) 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the COMPONENT VIDEO SETUP, then press the ENTER button. POWER ON STANDBY C OM P ONE N T PAGE V V V V V V FAV MAIN CH.
• To turn on the component connected to DC TRIGGER OUT 2 jack when the desired input source is selected, you should link DC TRIGGER 2 with the desired input source. 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DC TRIGGER 2, then press the ENTER button. POWER ON STANDBY DC PAGE FAV MAIN CH. SET CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO 1 2 4 5 7 8 T R I G GE R 2 D C T R I G GE R T UNER CD AUX T A P E MO N .
ENGLISH When selecting the DIGITAL RE-MASTERING 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the DIGITAL RE-MASTERING. POWER ON STANDBY PAGE FAV MAIN CH. SET CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO 1 2 4 5 7 8 3 6 9 OSD/MENU 2 DISP 0 ENT MI M2 M3 Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the desired mode.
SETTING THE SURROUND SETUP SETUP RETURN : B ack , : Se l ect To select the desired decoding mode. To select the desired surround mode. To select the desired Dolby surround mode. To adjust the dynamic range as desired. To adjust the PL IIx MUSIC PARAMETER as desired. Notes : • Only when the digital input is selected as signal input, the decoding mode and the surround mode can be both selected as desired. • When the analog input is selected, only the surround mode can be selected as desired.
ENGLISH When the SURROUND MODE is selected • Depending on the input signal format and the selected decoding mode, you can select the desired surround mode as follows: Signal format being input Dolby Digital 5.1, Selected decoding mode Auto, Dolby Digital mode Selectable surround mode (DOLBY DIGITAL EX,) Dolby Digital EX 6.
■Note: • Depending on whether “S/B CH” is set to “None” or not, you can select either the Dolby Pro Logic II surround or the Dolby Pro Logic IIx surround and can adjust its parameters as desired only while listening in either the PL II MUSIC mode or the PL IIx MUSIC mode. (Refer to “When selecting the SPEAKER CONFIGURATION” on page 46.) 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the PL II(x) MUSIC PARAMETER, then press the ENTER button.
SETTING THE CH LEVEL SETUP ENGLISH CH LEVEL SETUP P R ESE T 1 : P R ESE T1 P R ESE T 2 : P R ESE T 2 CH L EVEL L F E L EVEL C AL L TRIM C AL L TRIM TRIM TRIM , :Sel ect EN TE R : Ca l l RETURN : B ac k To recall the channel levels memorized into preset memory or to memorize the channel levels adjusted in the CH LEVEL TRIM menu, etc. To memorize the adjusted channel levels into preset memory. To adjust the current channel levels as desired.
3 Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to adjust the level of the selected channel as desired. POWER ON STANDBY POWER ON STANDBY PAGE PAGE FAV MAIN FAV MAIN CH. SET CH.
ENGLISH When selecting the LFE LEVEL TRIM 1 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the LFE LEVEL TRIM, then press the ENTER button. POWER ON STANDBY LFE PAGE LEVEL TR IM FAV MAIN CH. SET CH/ VOL ADJUST MUTE DECODE DSP DSP RETURN STEREO 1 2 4 5 7 8 3 6 9 OSD/MENU DISP 0 ENT MI M2 M3 RETURN:Back , : Select RNC-510 2 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired LFE level mode.
R OOM 2 F E E D V O L U M E MO D E ROOM2 F EE D T UNER CD AUX P HONO RETURN : B a c k S E T UP Variable : : Off V I DEO 1 V I DEO 2 V I DEO 3 V I DEO 4 V I DEO 5 V I DEO 6 , : S e l ect To select the desired volume mode. To select the desired ROOM 2 source. • The ROOM 2 function allows enjoying one source in the main room while playing another in a different room at the same time.
ENGLISH When selecting the ROOM 2 FEED mode 1 2 Press the CURSOR UP(▲)/DOWN(▼) buttons to select the ROOM 2 FEED mode. Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to select the ROOM 2 FEED mode as desired. POWER ON STANDBY POWER ON STANDBY PAGE FAV MAIN CH. SET CH/ VOL ADJUST MUTE DECODE DSP PAGE FAV MAIN RETURN CH.
If a fault occurs, run through the table below before taking your unit for repair. If the fault persists, attempt to solve it by switching the unit off and on again. If this fails to resolve the situation, consult your dealer. Under no circumstances should you repair the unit yourself as this could invalidate the warranty! PROBLEM POSSIBLE CAUSE REMEDY No power • The AC input cord is disconnected. • Poor connection at AC wall outlet or the outlet is dead or off. • Connect cord securely.
Specifications ENGLISH PRE AMPLIFIER SECTION ● Analog Audio • Total harmonic distortion, output 1 V, 1 kHz | 0.05 % • Intermodulation distortion 60 Hz : 7 kHz = 4 : 1 SMPTE, 8 Ω, output 1 V | 0.09 % • Input sensitivity/impedance, output 1 V Phono (MM) | 2.5 mV/47 kΩ Line (CD, TAPE MONITOR, VIDEO) | 200 mV/47 kΩ • Signal to noise ratio, IHF “A” weighted Phono (MM) | 72 dB Line (CD, TAPE MONITOR, VIDEO) | 100 dB • Frequency response Phono (MM), RIAA, 30~20, 000Hz | ±1.
P-965 A/V Tuner Pre Amplifier 5707-04747-002-0
