Home Theater Master Universal Remote Control SL-8000 Operating Manual
Table of Contents Page Introduction Battery Installation A. To Open and Close Battery Compartment Cover B. Low Battery Message Using Your Remote Control A. Function Table Reference Function Tables B. Preprogrammed Set Up Three Digit Code Method Auto Search Method Recalling the Set Up Code Number C. Operation Device Buttons Main Device Mode Automatic Audio Mode Backlighting Advanced Features A. Punch Through Controls Volume “Punch Through” Channel “Punch Through” Transport “Punch Through” B.
Introduction The Home Theater Master SL-8000 remote control is preprogrammed to operate over 1,000 Audio and Video components so that you can set it up by simply punching in a three digit code number that matches your equipment. The Home Theater Master SL-8000 remote control operates up to eight different audio and video devices in your home entertainment system.
Battery Installation This remote control uses four AAA 1.5 V batteries. Please be sure to match the batteries with the (+) and (–) markings inside the battery compartment during installation. A: To Open and Close the Battery Compartment Cover 1 To open the battery cover, push the latch forward toward the top of the remote control, and lift the latch up. 2 To close the battery cover, slide the battery cover straight back in (toward the top of the remote) and push down until it “clicks” into place.
Using Your Remote A: Function Table Reference AUD CD DVD AUX 1 2 3 4 SAT TV VCR CBL 5 6 7 8 POWER 9 MUTE 12 14 13 15 CH VOL T/ V 10 GUIDE 11 MENU 21 PAUSE SEL R E W F . F PLAY 20 19 STOP PRE. CH EXIT 1 2 3 18 17 23 FAV 22 16 24 25 26 27 37 28 29 30 38 31 32 33 39 35 34 36 40 SLEEP 4 5 6 INFO PRO.L 7 9 8 NEXT 3.
Using Your Remote Function Table No. Button Name Audio Functions SAT Functions TV Functions 1-8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25-34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Device Name Power Mute T/V Input VOL Up VOL Down CH Up CH Down Up/Pause Down/Stop Right/F.F. Left/Rew Sel/Play Guide/I<< Menu/>>I Exit/Rec Pre. Ch./Eject 1—0 10+ Enter/Shift Fav/Sleep Info/Pro. L. Next/3 Ch.
Using Your Remote Function Table No. Button Name VCR Functions Cable Functions 1-8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25-34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Device Name Power Mute T/V Input VOL Up VOL Down CH Up CH Down Up/Pause Down/Stop Right/F.F. Left/Rew Sel/Play Guide/I<< Menu/>>I Exit/Rec Pre. Ch./Eject 1—0 10+ Enter/Shift Fav/Sleep Info/Pro. L. Next/3 Ch.
Using Your Remote Function Table No. Button Name CD Functions DVD Functions AUX Functions 1-8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25-34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 Device Name Power Mute T/V Input VOL Up VOL Down CH Up CH Down Up/Pause Down/Stop Right/F.F. Left/Rew Sel/Play Guide/I<< Menu/>>I Exit/Rec Pre. Ch./Eject 1—0 10+ Enter/Shift Fav/Sleep Info/Pro. L. Next/3 Ch.
Using Your Remote B: Preprogrammed Set Up The Home Theater Master universal remote control can operate up to eight separate audio and video devices (equipment). To program the remote control for your devices, please use the following steps: Three Digit Code Method 1 Turn on the device you would like the remote control to operate, either manually or with your original remote control. 2 Find the three digit Set-Up Code number for your device from the tables on pages (33~50).
Using Your Remote Note: SET appears in the LCD for 20 seconds to indicate that the remote control is ready to be programmed. The following steps must be entered while SET appears in the LCD. 4 Point the remote control toward the device that was turned on in Step 1 and press in the first three-digit SetUp Code number for that device using the number buttons (0-9) on the remote control. SET followed by the number will appear in the LCD.
Using Your Remote Auto Search Method Please use this method if none of the Set-Up Code numbers worked for your device during the standard set-up procedure or if the manufacturer or brand for your device is not listed in Set-Up Code Tables. 1 Turn on the device you would like the remote control to operate, either manually or with your original remote control. 2 Press the corresponding Device Button (TV, VCR, SAT, CBL, AUD, CD, DVD, or AUX) and the MUTE button, simultaneously. SET will appear in the LCD.
Using Your Remote If you pass the correct Set-Up Code number, you can return to it by pressing the CHANNEL DOWN button, one Set-Up Code number at a time, until your device turns back on. Note: During programming, the signal for POWER ON and POWER OFF is located on the MUTE button. For devices that use separate POWER ON and POWER OFF buttons, pressing the MUTE button on the remote control during programming will only turn the device OFF.
Using Your Remote Recalling the Set-Up Code Number To display the three digit Set-Up Code number that was stored for a device. 1 Press the Device Button and the MUTE button, simultaneously. SET will appear in the LCD. 2 Press the T/V button. The LCD will quickly flash the three digit Set-Up Code number that was stored for your device in that mode. 3 Please write your Set-Up Code numbers in the chart below, for future reference.
Using Your Remote C: Operation After you have programmed the remote control for your equipment, use the following procedures to operate your home entertainment system: 1 Press the Device Button that you wish to operate: e.g. to operate a TV, press the TV Device Button; to operate a VCR, press the VCR Device Button, etc. 2 Aim the remote control at the device and press the POWER button to turn on the device. 3 Press the buttons that send out the commands you desire.
Using Your Remote Device Buttons Any press of a Device button at the top of the remote control can perform the following functions: 1 Changes the Device mode on the SL-8000 remote control. 2 Sends out a preprogrammed POWER ON command for a AUD AUD CD CD DVD DVD AUX AUX SAT SAT TV V T VCR VCR CBL CBL Device, if applicable. POWER 3 Sends out a joined selection. 4 Toggles between the Main Device mode and the Automatic CH VOL MUTE MUTE T/ V V T/ Audio mode if the Automatic Audio Mode is active.
Appendix A: Assignment of Audio/Video Equipment Please use the following listing to locate the correct Set-Up Code Tables for your equipment: AUDIO Set-Up Code Table: Audio Receivers, Preamplifiers, Surround Processors Satellite Set-Up Code Table: DSS, Primestar, DBS, Echostar, C Band receivers TV Set-Up Code Table: TVs, Monitors, Video/LCD Projectors VCR Set-Up Code Table: VCRs, TV/VCR combination units CABLE Set-Up Code Table: Cable Boxes, Internet/TV Set-Tops CD Set-Up Code Table: CD Players, CD Changers
Glossary Punch Through Advanced feature that enables you to operate Volume, Channel or Transport Control functions of one device while in another mode. Example: Audio Volume Control “Punch Through” gives you the ability to raise, lower and mute your Audio receiver volume while operating the remote control in the TV mode. Set-Up Code Number The three-digit number that is used to program the remote control for your particular manufacturer or brand of audio/ video equipment.
Using Your Remote 4 Press the ENTER button. SAVE will flash twice and the LCD will return to AUDIO indicating that the joined function has been stored. Every time that the Device button is pressed it will also emit the joined function. To erase a joined function from a Device button: 1 Press the AUDIO and ENTER buttons simultaneously on the remote control. JOIN will appear in the LCD. 2 Press the Device button that you would like to erase a joined function.
Advanced Features After you set-up the remote control to operate your equipment, you can also program advanced features on the remote control. The advanced features are designed to enhance the use of the remote control with your home entertainment system. A: Punch Throughs Volume Control “Punch Through” You can program the remote control so that either the AUDIO or TV Volume Control (VOLUME UP, DOWN AND MUTE) will also operate in other modes on the remote control.
Glossary Cursor Control Buttons that correspond to the UP, DOWN, LEFT, RIGHT, SELECT, GUIDE, MENU and EXIT functions of your audio/video equipment. Device Audio or video equipment, e.g. Television, VCR, Cable box, Audio receiver, Satellite receiver, etc. Device Button Any of the eight buttons located at the top of the remote control labeled AUD, CD, DVD, AUX, SAT, TV, VCR and CBL. Device Buttons are used to select modes of operation and to program the remote control.
Warranty The Home Theater Master SL-8000 remote control comes with a one-year warranty from the date of purchase. Specifications Model SL-8000, infrared remote control. Power Four 1.5 V AAA Batteries. Dimensions (h/w/d) 8.88 x 2.5 x 1.25 inches Weight 6.5 oz.
Advanced Features To Return to the Original Setting: 1 Select the mode that you want to turn off the Volume Control “Punch Through.” 2 Press the corresponding Device Button and the MUTE button simultaneously. SET will appear in the LCD. 3 Press the VOLUME UP button. PUNCH will appear in the LCD. 4 Press the Device Button again. The DEVICE Mode will flash in the LCD. The AUDIO or TV Volume Control “Punch Through” is now turned off.
Advanced Features 4 Press either the SAT Device Button to set-up for SAT Channel Control or the CBL Device Button to set-up for Cable Channel Control. Either SAT or CBL will flash in the LCD, depending on the Device Button selected. SAT or Cable Channel Controls will now override the original CHANNEL UP and DOWN in this mode. To Return to the Original Setting: 1 Select the mode that you want to turn off the Channel Control “Punch Through.
Advanced Features Your device will turn off when the correct Set-Up Code number has been selected. If it does not turn off, select the next Set-Up Code number from the table, and press in that code number. When your device turns off, proceed to Step 6. 6 Press the Device Button that was selected in Step 2. to store the Set-Up Code number. PASS will flash in the LCD to confirm the programming.
Advanced Features LCD Displays in the Automatic Audio Mode A_TV A_DVD A_AM2 A_PRJ A_AV A_VCR A_AUX A_TA1 A_AX2 A_TAP A_CAB A_TV2 A_TA2 A_LD A_DAB A_SAT A_VC2 A_WEB A_A2 AUDIO A_TUN A_SUR A_LIT A_CD A_AM1 A_DAT A_DSS D: Programming a Second TV, VCR, etc. to Other Device Buttons. This feature is used to program the remote control for two or more TVs, VCRs, etc., or to program a device into a mode with a different Device Button name.
Advanced Features Transport Control “Punch Through” AUD AUD DVD DVD CD CD AUX AUX You can set-up your remote control so that VCR or CD Transport Controls (PLAY, STOP, FAST FORWARD, POWER POWER REWIND, PAUSE, and RECORD) also operate in other VOL CH VOLwillCH modes on the remote control. SAT SAT MUTE MUTE CBL CBL VCR VCR TTV V T/ T/V V GUIDE GUIDE MENU MENU PAUSE PAUSE SEL SEL R R EE W W F .F . FF PL PLAY AY PLAY PL AY Transport Controls STOP STOP PRE. PRE.
Advanced Features The VCR or CD Transport Controls (PLAY, STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will now override the original functions of the buttons in this mode. To Return to the Original Setting: 1 Select the mode that you want to turn off the Transport Control “Punch Through.” 2 Press the corresponding Device Button and the MUTE button simultaneously. SET will appear in the LCD. 3 Press the SELECT/PLAY button. PUNCH will appear in the LCD. 4 Press the Device Button again.
Using Your Remote C. Changing the LCD Display Twenty-seven different LCD displays can be selected for each Device mode of the remote control. To select an alternate LCD display, please use the following procedure: 1 Press and hold the Device button for which you would like to change the LCD setting. 2 While pressing the Device button, press and release the MENU button. Each time the MENU button is pressed, the LCD will show one of twenty-seven displays.
Advanced Features 1 Press the Audio Device Button and the MUTE button simultaneously. SET will appear in the LCD. 2 Press Memory Button M2. M2_ # # will appear in the LCD. 3 Press the MUTE button (to turn on the Audio receiver) M2__01 will appear in the LCD. Press the TV Device Button (to change to the TV mode) M2__02 will appear in the LCD. Press the MUTE button (to turn on the TV) M2__03 will appear in the LCD. Press the VCR Device Button (to change to the VCR mode) M2__04 will appear in the LCD.
Advanced Features B: Memory Buttons There are five memory buttons (M1~M4, Power) that are designed to store up to 15 commands in each button. Pressing any one of the memory button will send out the series of commands that are stored in the button. AUD AUD CD CD DVD DVD AUX AUX SAT SAT T TV V VCR VCR CBL CBL POWER POWER You can either turn on or off up devices by storing CH CH VOL VOLto eight Power on/off commands or use it to select the favorite channels by storing channel numbers into the button.
Advanced Features • Macro Commands: Memory Buttons can store and emit up 15 commands including multiple Power On/Off sequences. Example: In the Audio mode, the POWER Memory Button can be programmed to turn on the TV, turn on the Audio receiver, turn on the VCR and turn on the Satellite receiver with one button push. Note: The MUTE buttons is used to designate POWER commands during Memory Button programming. See the Example: Memory Button Programming for further description.
Advanced Features Programming Memory Buttons: 1 Select the section that you wish to program the Memory Button in by pressing the corresponding Device Button (AUD, or SAT) and MUTE button, simultaneously. SET will appear in the LCD. 2 Press one of the Memory Buttons (M1, M2, M3, M4, or POWER) into which you wish to store the functions. M(1-5)_# # will appear in the LCD. 3 Press in up to fifteen commands that you want stored in that Memory button.
Using Your Remote No IR commands are emitted during the second press of a Device button when the remote is in the Automatic Audio mode. Pressing the Device button again will return the remote to the Main Device Mode. To Delete the Automatic Audio for a Device mode: 1 Press and hold the AUDIO Device button and the LIGHT button simultaneously. A_SET will appear in the LCD. 2 Press the Device button corresponding to the Device mode to be deleted for Automatic Audio. E.g. VCR, CD etc.
Set-Up Code Tables AUX Manufacturer/Brand Set-Up Code Number 3M AIWA ARCHER AUTON CARVER DENON DMX DRAPER SCREEN DWIN EVERQUEST EXTRON FAROUDJA FISHER FUJI GOLDSTAR HARMAN KARDON JERROLD JVC KENWOOD LINN LITE-TECH LUTRON LUXMAN MAGNAVOX MAKITA MARANTZ MCINTOSH MINDPATH MITSUBISHI NAD NAKAMICHI NILES NSM ONKYO OPTIMUS PANASONIC PHILIPS PIONEER POLKAUDIO QUASAR REPLAY 152 015 071 100 114 164 155 191 006 008 027 024 036 105 227 229 156 204 080 206 151 184 064 209 011 233 153 106 116 239 240 185 005 013 023
Set-Up Code Tables Cable Manufacturer/Brand Set-Up Code Number REGAL REGENCY SAMSUNG SCIENTIFIC ATLANTA SIGNAL SIGNATURE SL MARX SONY SPRUCER STARCOM STARGATE TADIRAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH 049 050 057 030 003 011 041 042 043 045 046 030 103 030 096 047 078 002 004 008 009 008 030 097 104 030 039 040 056 052 007 014 004 053 005 007 014 032 035 012 015 018 086 087 088 089 052 060 093 100 45
Set-Up Code Tables Cable Manufacturer/Brand Set-Up Code Number ABC AMERICAST ANTRONIX ARCHER BELL SOUTH CENTURION CENTURY CITIZEN COMBANO COMSAT COMTRONICS DIGICABLE EAGLE EASTERN ECHOSTAR ELECTRICORD GEMINI GENERAL ELECTRIC GENERAL INSTRUMENT GNC GOLDEN CHANNEL HAMLIN HITACHI JERROLD MAGNAVOX MEMOREX MITSUBISHI M-NET MOVIE TIME NOVAPLEX NSC OAK PANASONIC PARAGON PHILIPS PIONEER PRUCER PTS PULSAR RCA RECOTON 103 003 004 039 042 046 053 099 014 005 007 014 099 092 007 007 080 081 074 030 101 020 030 040 0
Set-Up Code Tables VCR Manufacturer/Brand Set-Up Code Number THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH 034 006 008 013 042 047 059 079 082 112 131 081 040 101 040 012 048 012 034 046 141 040 003 013 017 024 031 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 43
Set-Up Code Tables VCR Manufacturer/Brand Set-Up Code Number MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA ORION PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RADIO SHACK RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS SHARP SHINTOM SIGNATURE SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA 013 020 045 046 051 059 061 142 151 049 034 040 024 034 012 023 039 043 048 043 053 054 025 066 070 083 133 140 145 157 163 074 013 020 031 063
Set-Up Code Tables VCR Manufacturer/Brand Set-Up Code Number AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROOKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO DAYTRON DBX DYNATECH ELECTROHOME EMERSON 034 161 016 043 046 124 125 142 146 072 031 012 023 039 043 035 037 129 028 031 108 003 040 135 031 041 005 007 010 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 162 116 003 008 009 010 034 031 063 072 107 109 144 147 132 136 155 040 11
Set-Up Code Tables TV Manufacturer/Brand Set-Up Code Number SAMPO SAMSUNG SANYO SCOTT SEARS SELECO SHARP SIEMENS SIGNATURE SONY SOUNDESIGN SPECTRICON SSS SUPRE MACY SYLVANIA TANDY TATUNG TECHNICS TECHWOOD TEKNIKA TELEFUNKEN TELERENT TERA TMK TOSHIBA TOTEVISION UNIVERSAL VIDEO CONCEPTS VIDIKRON VIDTECH WARDS 197 058 004 004 050 089 101 105 127 143 160 166 007 020 053 057 082 187 004 028 043 048 143 015 030 004 007 028 057 143 094 160 082 165 166 189 170 081 019 028 029 014 004 022 143 175 088 072 070 085
Set-Up Code Tables TV Manufacturer/Brand Set-Up Code Number JCPENNY JENSEN JVC KEC KENWOOD KLOSS KMC KTV LODGENET LOGIK LUXMAN LXI MAGNAVOX MARANTZ MATSUI MEMOREX METZ MGA MINERVA MITSUBISHI MTC NAD NEC NIKEI ONKING ONWA OPTONICA ORION PANASONIC PHILCO PHILIPS PIONEER PORTLAND PROSCAN PROTON QUASAR RADIO SHACK RCA REALISTIC ROCTEC RUNCO 197 004 008 009 024 030 065 101 143 156 160 013 034 038 070 083 145 199 043 197 070 002 059 143 197 043 143 154 072 072 004 166 007 015 052 081 160 164 197 003 004 022 05
Set-Up Code Tables TV Manufacturer/Brand Set-Up Code Number ADMIRAL AKAI AMARK AMPRO AMSTRAD ANAM AOC AUDIOVOX BLAUPUNKT CANDLE CAPEHART CETRONIC CITIZEN CLASSIC CONCERTO CONTEC CORONADO CRAIG CROWN CURTIS MATHES CXC DAEWOO DAYTRON DWIN DYNASTY DYNATECH EIKI ELECTROHOME EMERSON 072 081 161 160 197 146 112 143 073 167 052 043 054 056 080 112 131 197 004 112 058 076 088 197 002 003 004 058 043 197 002 003 004 043 101 103 143 043 004 043 050 051 143 043 054 043 143 197 101 004 143 043 004 016 043 044 076 10
Set-Up Code Tables Satellite Manufacturer/Brand Set-Up Code Number PROSAT PROSCAN RCA REALISTIC SAMSUNG SATELLITE SERVICE SONY STARCAST SUPERGUIDE TEECOM TOSHIBA TOWN & COUNTRY UNIDEN 072 151 106 150 151 106 150 043 074 123 028 035 047 085 103 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 023 026 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 VIEWSTAR WINEGARD ZENITH 37
Set-Up Code Tables Satellite Manufacturer/Brand Set-Up Code Number ALPHASTAR AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTROHOME EUROSAT FUJITSU GENERAL ELECTRIC GENERAL INSTRUMENT HITACHI HOME CABLE HOUSTON TRACKER HUGHES HYTEK HYUNDAI ICR JANIEL KATHREIN LEGEND LUTRON LUXOR MACOM MEMOREX NEXTWAVE NORSAT PACE PANASONIC PANSAT PERSONAL CABLE PHILIPS PL PRESIDENT PRIMESTAR 123 050 129 113 051 126 053 053 013 014 015 018 036 055 008 009 012 07
Set-Up Code Tables Audio Manufacturer/Brand Set-Up Code Number ADC ADCOM AIWA AKAI AMC AMEND AMX ANGSTROM ARCAM AUDIO ACCESS AUDIO ALCHEMY AUDIO DESIGN AUDIO EASE AUDIO FILE AUDIO MATRIX AUDIO SOURCE AUDIO TECHNICA B&K BOSE BRYSTON CARVER CASIO CHIRO CINEMA SOUND CITATION CLARION CURTIS MATHES DENON EIGER ELAN ENLIGHTENED AUDIO FISHER FOSGATE GE GOLDSTAR HAFLER HARMAN KARDON HITACHI INKEL JBL JCPENNY 007 082 092 225 161 269 018 104 170 202 203 213 211 188 138 189 125 126 127 128 258 054 196 142 141 147 1
Set-Up Code Tables Audio Manufacturer/Brand Set-Up Code Number JEFF ROWLAND JENSEN JVC KENWOOD 206 058 240 163 191 114 266 026 066 145 146 181 190 197 192 182 199 151 222 180 005 220 216 150 072 007 120 235 236 237 124 137 139 052 165 115 004 009 076 056 086 164 152 208 006 028 031 040 063 185 186 251 265 238 076 100 012 013 242 243 204 157 158 042 043 081 112 186 113 111 244 245 172 183 176 017 046 064 107 108 187 079 080 090 179 209 270 026 041 138 032 195 219 177 129 130 132 261 196 249 250 251 063 01
Set-Up Code Tables CD Manufacturer/Brand Set-Up Code Number ADCOM AIWA AKAI AMC AMEND ARCAM AUDIO ACCESS AUDIO EASE AUDIO TECHNICA BSR CALIFORNIA AUDIO CAPETRONIC CARRERA CARVER 062 042 059 065 088 089 105 122 170 187 085 195 202 231 232 118 238 119 147 165 046 037 057 103 008 063 057 080 185 041 044 050 086 107 130 134 135 138 139 203 204 167 111 182 182 159 035 002 123 042 069 102 050 185 134 008 111 010 069 102 080 093 018 033 047 208 042 175 130 143 144 014 061 092 141 158 004 022 136 163 213 214 242
Set-Up Code Tables CD Manufacturer/Brand Set-Up Code Number MITSUMI MODULAIRE MONDIAL NAD NAKAMICHI NEC NIKKO NSM ONKYO OPTIMUS PANASONIC PARASOUND PHILIPS PIONEER PROCEED PROTON QUASAR RADIO SHACK RCA REALISTIC ROTEL SAE SANSUI SANYO SCOTT SHARP SHERWOOD SIGNATURE SONY SOUNDESIGN SUMO SYLVANIA SYMPHONIC TAEKWANG TANDY TEAC TECHNICS TECHWOOD THETA DIGITAL TOSHIBA VECTOR RESEARCH VICTOR WARDS YAMAHA YORX 153 182 147 006 005 067 178 217 218 219 095 014 062 046 044 107 030 038 039 168 169 010 050 057 058 08
Set-Up Code Tables AUX Manufacturer/Brand Set-Up Code Number RUSSOUND SANSUI SCIENTIFIC ATLANTA SHARP SHERWOOD SIMA SOLO ELECTRONICS SOMFY SONY STARCOM TEAC TECHNICS TOSHIBA TURBOSCAN VELODYNE VICTOR X-10 XANTECH YAMAHA 081 027 113 119 224 163 156 026 057 131 175 181 038 004 028 030 033 034 082 207 078 079 020 022 052 084 089 164 165 166 153 009 059 212 007 010 076 088 109 122 193 112 167 203 106 183 168 169 170 171 172 188 189 021 026 031 067 50
Set-Up Code Tables DVD Manufacturer/Brand Set-Up Code Number DENON FUNAI GE GOLDSTAR JVC KENWOOD MAGNAVOX MARANTZ MITSUBISHI NAD ONKYO OPTIMUS PANASONIC PHILIPS PIONEER PROSCAN RADIO SHACK RCA REALISTIC RUNCO SAMSUNG SANYO SHARP SONY TECHNICS THETA DIGITAL THOMPSON TOSHIBA YAMAHA ZENITH 007 206 207 080 120 026 027 057 012 152 013 066 032 121 211 017 121 121 076 035 049 013 021 113 042 066 032 023 106 117 121 026 027 120 026 027 002 049 127 056 070 075 152 013 033 053 110 113 032 026 027 035 152 106 042 1
Set-Up Code Tables Audio Manufacturer/Brand Set-Up Code Number SHERWOOD SONY SOUNDESIGN SOUNDSTREAM SSI SUMO TAEKWANG TEAC TECHNICS THETA DIGITAL TOSHIBA WARDS YAMAHA ZENITH 024 038 055 102 103 105 106 051 030 018 093 223 247 248 160 166 015 101 184 218 271 036 084 088 068 171 138 005 019 049 111 212 217 122 176 193 219 178 177 200 257 262 136 060 087 198 180 026 253 169 067 173 205 264 232 089 264 143 210 35
OEE-0031V Rev.
