MX-1200 Color Touch Screen Owner’s Manual
MX-1200 COLOR TOUCH SCREEN This remote control was Custom Programmed for you by: For questions about your Custom Programming call: Custom Programming of a complex home theater and/or a multi-room system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact and exact details on the proper sequences of control.
MX-1200 COLOR TOUCH SCREEN Congratulations! 1 Using the MX-1200 2 Connecting the Battery Pack 3 Using the Charging Base 3 Displaying the Settings Screen 4 Sleep Settings 5 System 5 Brightness 5 Power 5 Button Light 6 Date and Time 6 Calibration 6 Pickup Settings 6 Sound 7 Factory Default 7 Exit 7 Maintaining Your MX-1200 8 Specifications 8 USA Limited Warranty Statement 9 Federal Communication Commission Interference Statement 11
MX-1200 COLOR TOUCH SCREEN Congratulations Thank you for purchasing the Complete Control MX-1200 touch screen universal remote control. This remote can wirelessly control your devices throughout the home using an RF base station. Controlling your home is simple with the MX-1200 remote. Brilliant 2.4" color touch screen with audible button presses The MX-1200 has a programmable 2.4” color touch screen.
MX-1200 COLOR TOUCH SCREEN Using the MX-1200 The MX-1200's main pages display the activities and devices in your system. Press the MAIN button to view your devices or the activities placed here by your custom installation specialist. Large systems may have more than one page. Press either of the PAGE buttons if you don’t see all your devices. Gently press any screen button with your finger to select an activity or a device. The screen will change to display the buttons you need for that activity/device.
MX-1200 COLOR TOUCH SCREEN Connecting the Battery Pack Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the MX-1200. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the MX-1200. The battery will snap into place when aligned properly. Replace the cover and snap it into place.
MX-1200 COLOR TOUCH SCREEN Displaying the Settings Screen You can enter the Settings menu by pressing and holding the MAIN and ENT button for three seconds. The MX-1200i will timeout after it is idle for 30 seconds and return to the previous setting or Main screen. There are two pages of Settings screens. Select a setting by pressing a button on the LCD screen. Press either of the PAGE buttons to access the other page. To go back a step or to get out of the settings screen, press the MAIN button.
MX-1200 COLOR TOUCH SCREEN Sleep Settings Conserve energy by configuring the MX-1200 to fall asleep after a specified amount of time. Select an amount of time by adjusting the slide bar. System The System Information screen displays data about your MX-1200's operating system, memory etc. Brightness Adjust the screen brightness by moving the slider. Min (minimum) is the dimmest setting and Max (maximum) is the brightest setting. Power You can display the remaining charge by selecting Power.
MX-1200 COLOR TOUCH SCREEN Button Light You can adjust the brightness of the LEDs that backlight the buttons of the MX-1200. Move the slider to the left to dim or move it to the right to brighten the backlighting. Date and Time Your MX-1200 may have been programmed to display the time or date on the touch screen. If you need to, you can adjust the time displayed by changing the settings on this screen. Calibration If you like, you can calibrate the screen by running the calibration setting.
MX-1200 COLOR TOUCH SCREEN Sound You can adjust the button beep to Off or Loudest by dragging the slider to your desired position. Factory Default WARNING! Only use this button when instructed to by Technical Support. It resets the memory of the MX-1200 to the factory condition. All your programming will be lost! Exit When you have finished adjusting Settings, simply tap the Exit button to return to normal operation.
MX-1200 COLOR TOUCH SCREEN Maintaining Your MX-1200 Be careful not to scratch the touch screen, only use your finger to tap the LCD touch screen or use a plastic pen top or PDA stylus. Never use a real pen, pencil or any other sharp object on the screen. Keep it away from extreme cold or heat. The MX-1200 is not waterproof. Do not use it in any location that is damp or wet. If you spill water on it, take out the battery pack and let the MX-1200 dry for 48 hours before powering it up again.
MX-1200 COLOR TOUCH SCREEN USA Limited Warranty Statement Your Universal Remote Control, when delivered to you in new condition, is warranted against defects in materials or workmanship as follows: UNIVERSAL REMOTE CONTROL, INC. warrants this product against defects in material or workmanship for a period of one (1) year and as set forth below.
MX-1200 COLOR TOUCH SCREEN LIMITATION OF REMEDIES UNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ON THIS PRODUCT.
MX-1200 COLOR TOUCH SCREEN Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTE Page 12
NOTE Page 13
NOTE Page 14
NOTE Page 15
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.