WM-N-BM-30 User manual
HW Application note for WM-N-BM-30 Please find detail information from link as below, https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/ ST-Link/v2 Utility : http://www.st.com/st-web-ui/static/active/en/st_prod_software_internet/resource/technical/soft ware/utility/stsw-link004.zip ST-Link/v2 driver : http://www.st.com/st-web-ui/static/active/en/st_prod_software_internet/resource/technical/soft ware/driver/st-link_v2_usbdriver.
Universal Scientific Industrial Corp.. Document released by WP/RD/WM/HW1 WM-N-BM-30 Application Note Description Doc No. Date. 2015-05-04 Rev Page 1.1 3 1. Characteristic Option 1.1 Boot mode At startup, boot pins are used to select one out of three boot options: Boot from user Flash Boot from system memory Boot from embedded SRAM The boot loader is located in system memory.
Universal Scientific Industrial Corp.. Document released by WP/RD/WM/HW1 WM-N-BM-30 Application Note Description 1.2 Doc No. Date. 2015-05-04 Rev Page 1.1 4 Low Power mode By default, the microcontroller is in Run mode after a system or a power-on reset. In Run mode the CPU is clocked by HCLK and the program code is executed. Several low-power modes are available to save power when the CPU does not need to be kept running, for example when waiting for an external event.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual.
–Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
End Product Labeling (IC) When the module is installed in the host device, the IC label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily re-moved. If not, a second label must be placed on the outside of the final device that contains the following text: “Contains IC: 10293A-WMNBM30”. The grantee's IC ID can be used only when all IC compliance requirements are met.
2. This module can be installed in portable, mobile, or fixed application. To assure RF Exposure compliance, the antenna must not transmit simultaneously with any other antenna or transmitter, except in accordance with IC multi transmitter product procedure. 3. If any other simultaneous transmission radio is installed in the host platform together with this module, or above restrictions cannot be kept, the Canada authorization is no longer considered valid and the IC ID cannot be used on the final product.
R&TTE Regulation: In all cases assessment of the final product must be met against the Essential requirements of the R&TTE Directive Articles 3.1(a) and (b), safety and EMC respectively, as well as any relevant Article 3.3 requirements. 1. The chip antenna (gain: 2.04 dBi) was verified in the conformity testing, and for compliance the antenna shall not be modified. A separate approval is required for all other operating configurations, including different antenna configurations. 2.
Česky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English Español [Spanish] Ελληνική [Greek] Français [French] Italiano [Italian] Latviski [Latvian] Lietuvių [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar [Hungarian] Polski [Polish] [Jméno výrobce] tímto prohlašuje, že tento [typ zařízení] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dyrektywy 1999/5/EC. Português [Nome do fabricante] declara que este [tipo de equipamento] está conforme [Portuguese com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. ] Slovensko [Slovenian] Slovensky [Slovak] Suomi [Finnish] Svenska [Swedish] [Ime proizvajalca] izjavlja, da je ta [tip opreme] v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.