User Manual Infinitracker NCT-8101 (LTE Bluetooth gateway, GPS, sensors) www.infinitracker.
Features LTE network LTE-M1 & NB-IoT LTE bands 700 ~ 2200 MHz B1,B2,B3,B4,B5,B8,B12,B13,B17,B20,B25,B26,B28,B66 LTE Countries Global, 110+ countries LTE sensitivity -108dBm LTE output power 23dBm LTE certifications PTCRB LTE SIM/eSIM 4FF nano GPS sensitivity -151dBm GPS accuracy 5m GPS time to first fix Typical cold start 36s, hot start 1.3s GPS location tracking Changeable tracking frequency, tracking history, viewed on Google map Bluetooth Bluetooth 5.
Waterproof IP67 Color White & Black Certifications PTCRB, Bluetooth, UL, EMC/FC/IC/CE Storage temperature -30 °C to +80 °C Operating temperature -20 °C to +70 °C Humidity 5% to 95% Mechanical Ruggedized Cloud Configuration, management: www.infinitracker.
Installation buzzer button LED (3-color) Installation hole 4
For longer battery life, make sure this side up when being installed. Wrong installation direction could shorten battery life by 10~30%. The worst case is up-side-down. The side with LED on the device must not face ground when being installed. Infinitracker is not a portable device for end user. It is required to be installed and fixed with screws by professional.
Power on/off device Power on: Long button press (> 3 seconds) followed by short button press (< 1 seconds). In a few seconds, you will see Green LED blinks. Power off: Long button press (> 3 seconds) followed by short button press (< 1 seconds). In a few seconds, you will see Red LED blinks. Power status check: Short button press (< 1 seconds). In a few seconds, you will see either Red or Green LED blinks. Red LED means the device is powered off.
Manage device Register an account in www.infinitracker.com Submit request to info@infinitracker.com : 1) Your account name 2) Your devices’ IMEI numbers After Infinitracker supporters assign the devices to your account, you can manage your devices online.
Warning of battery 1. CAUTION : Risk of explosion if the battery is replaced by an incorrect type. 2. Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium battery types). 3. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. 4.
Federal Communication Commission Compliance Statement NCT-8101 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
ISED Compliance statement: This device complies with ISED’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
EU DECLARATION OF CONFORMITY We, Infinitracker Inc.
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013 EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 Green standards applied: EN 50581 The Notified Body (Name: CTC advanced, ID: 0682) performed the conformity assessment according to Annex III, Module B of the Radio Equipment Directive 2014/53/EU and issued the EU-type examination certificate (Ref. No.: xxxxxxx) covering the essential requirements of article(s) 3.1a, 3.1b, 3.2.
