URC 7800 Cinema 7+ User Guide Previous Model Name: Cinema 7 Web Site : http://www.oneforall.
CONTENTS OVERVIEW OVERVIEW ............................................................................3 FEATURES AND FUNCTIONS ..............................................4 INSTALLING THE BATTERIES ..............................................8 SETTING UP YOUR COMPONENTS ....................................8 Programming the Cinema 7+™ to operate your TV ..........8 Setup Codes For TVs ....................................................9 Programming the Cinema 7 to operate your VCR............
FEATURES AND FUNCTIONS The illustration below and the chart on the next three pages describe the features and functions of the Cinema 7+™ universal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs. FEATURE - FUNCTION The Light (LED) flashes red to show that the remote is working and is sending a signal. The SETUP key is used to program your Cinema 7+™.
The EXIT key exits or clears your on screen menus. The EXIT key may also control the following functions in other modes: RCVR, AUX and CD mode = Open/Close. ▲ The PROG/GUIDE key operates your components secondary menus as well as your DBS system’s and Cable Converter’s Guide function. Use the ▲, , and (Menu Up, Down, Left and Right) keys to navigate your menus. If your original remote control had a SELECT key to select options in your menus, use SEL. Use the EXIT key to exit/clear your OnScreen menus.
tional details. POWER. The TV should turn off. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your TV. NOTE: If you have tried all the codes listed for your brand and your TV does not respond, try using the search method found on page 22. INSTALLING THE BATTERIES Your Cinema 7+™ requires four (4) new AAA alkaline batteries. To install the batteries: 1. On the back of the Cinema 7+™, pull back on the tab and lift the battery cover off.
JVC KEC Kenwood Kloss KTV 0053 0180 0019, 0030 0024 0030, 0180, 0185, 0032 Teknika Telefunken TMK Toshiba 0054, 0056, 0060, 0092, 0150, 0016, 0019, 0179, 0180, 0039 0056 0056, 0177, 0178 0156, 0060, 0154 Setup Codes For TVs (continued) Setup Codes For TVs (continued) LG Logik Luxman LXI Magnasonic Magnavox Majestic Marantz Matsushita Megatron MEI Memorex MGA Midland Minutz Mitsubishi Motorola MTC Multitech NAD NEC Nikko NTC Onwa Optimus Optonica Orion Panasonic Penney Tosonic Totevision Vector Resear
Audiovox Beaumark Bell & Howell Broksonic Calix 0037 0240 0104 0184, 0209, 0479, 0002, 0121 0037 Quarter Quartz Quasar RadioShack Radix 0046 0046 0162, 0035, 0077, 0454, 1062, 1162, 1262 0000, 0037, 1037, 1062, 1162, 1262 0037 Setup Codes For VCRs (continued) Setup Codes For VCRs (continued) Canon Carver CCE Cineral Citizen Colt Craig Curtis Mathes Cybernex Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson 0035 0081 0072, 0278 0278 0037, 0278 0072 0072, 0240, 0037, 0047, 0271 0035, 0041,
press POWER. The unit should turn off. If it does not respond, Repeat steps 2-4, trying each code listed for your brand until you find the one that operates your TV/VCR Combo. NOTE: If you have tried all the codes listed for your brand and your TV/VCR Combo does not respond, try using the search method found on page 22. 5. Your Cinema 7+™ is now programmed to operate your TV/VCR Combo. Write your TV/VCR Combo code in the boxes to the left for future reference.
Denon Mitsubishi NAD Pioneer Sony 0059 0059 0059 0059 0193, 0201 Programming the Cinema 7+™ to operate your Receiver/Tuner: Locate the brand name of your Receiver/Tuner in the “Setup Codes For Receiver/Tuners” section (starting below), and write it in below. Receiver/Tuner Brand: ______________________ The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7+™ to operate your Receiver/Tuner as follows: 1.
boxes to the left for future reference. Satellite Receiver Brand: ____________________ Remember, if you want to use your Cinema 7+™ to operate your CD Player, press the CD key first. The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 7+™ to operate your Cable Converter or Satellite Receiver as follows: Setup Codes For CD Players 1. Turn on your Cable Converter or Satellite Receiver. 2.
Hytex Jasco Jerrold Linsay Magnavox Memorex Movie Time Novaplex 0007 0153, 0315, 0015 0476, 0003, 0014, 0011, 0012, 0015, 0810 0440 0027, 0014 0000 0063, 0156 0618 Setup Codes for Cable Converters (continued) NSC Oak Optimus Panasonic Panther Paragon Philips Pioneer Popular Mechanics Prelude Pulsar RadioShack RCA Realistic Recoton Regal Regency Rembrandt Runco Samsung Scientific Atlanta Seam Signal Signature SL Marx Sprucer Starcom Stargate Starquest Sylvania Tandy Teleview Texscan TFC Timeless Tocom Tosh
Curtis Mathes Denon GE Harman/Kardon JVC Linn Luxman Magnavox Marantz Nakamichi Optimus Panasonic Philips Pioneer Realistic Sansui Shure Sony Soundesign Technics Victor Wards Yamaha 0300 0160 0078 0892 0331 0269 0165 0269 0269, 0321 0321 0013, 0300, 0395 0308 0269 0013, 0300 0395 0321 0264 0220, 0689 0078 0308 0331 0013, 0078 0354 which four-digit code is operating your equipment.
NOTE: Steps 4 through 6 need to be completed within 10 seconds. Please read the next three steps before proceeding. For example, to set up a Cassette Player on the VCR key: 4. 1. Turn on your Cassette Player and insert a tape. 2. Press VCR and release. Press and hold SETUP until the Cinema 7+™’s red light blinks twice, then release SETUP. 3. Enter the first four-digit Cassette Player code listed for your brand in the “Setup Codes For Audio Cassettes” section.
Aiwa Fisher Harman/Kardon Jerrold JVC Nikko RCA Scientific Atlanta Sony Starcom 0010, 0159, 0404 0052 0477 0459, 0520 0073 0376 0056 0460 0010, 0159 0459 VCR code RCVR to DVD/LD SETUP* - 992 - DVD/LD - RCVR - RCVR - SETUP* DVD/LD Player code RCVR to CD SETUP* - 992 - CD - RCVR - RCVR - SETUP* CD Player code RCVR to CBL/SAT SETUP* - 992 - CBL/SAT - RCVR - RCVR SETUP* - Cable/DBS code AUX to TV SETUP* - 992 - TV - AUX - AUX - SETUP* - TV code AUX to VCR SETUP* - 992 - VCR - AUX - AUX - SETUP* - VCR cod
Press and release one of the MACRO keys. This will be the key that will play back the series of keystrokes assigned to that key. 4. Begin entering the sequence of keystrokes, up to 15, that you wish to be played back when you press the MACRO key. For example: RCVR – POWER – TV – POWER – TV/VCR (To change the input on the TV to VIDEO 1) – CBL/SAT – POWER. 5. Once your sequence is entered, press and hold SETUP until the Cinema 7+™’s red light blinks twice.
TROUBLE SHOOTING Problem Solution TROUBLE SHOOTING (continued) Problem Solution Red light does not blink when you press a key? Replace the batteries with four (4) new AAA alkaline batteries. Surround on Sony receiver will not turn on? The Cinema 7+™ does not operate your home entertainment components or is not performing commands properly? Try all of the codes listed for your brand of home entertainment component in the “Setup Codes” section.
This product has been discontinued and is no longer supported ONE FOR ALL® PRODUCTS Limited Warranty One For All (“OFA”) warrants, to the original purchaser only, that this product will be free from defects in materials and workmanship, under normal use, for ninety (90) days from the date of original purchase.