Atlas Manual rev2 E/Sp 5/8/03 5:18 PM ATLAS CABLE 4-DEVICE Universal Remote Control (Control Remoto Universal) User’s Guide (Guía Del Usuario) Page 1
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 2 TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features And Functions . . . . . . . . . . . . . . . . . . . . . . . . 4 Key Charts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Programming Device Control . . . . . . . . . . . . . . . . . . . 8 Programming TV/VCR Combo Control. . . . . . . . . . . .
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 3 INTRODUCTION The Atlas Cable 4-Device Universal Remote Control by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate all of your original home entertainment remote controls into one easy-to-use product.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 4 FEATURES AND FUNCTIONS Use the illustration below to locate features on the Atlas Universal Remote Control and then study the Key Charts (on the next two pages) to learn how they function.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 5 Key Charts Use SETUP for all programming sequences. Press POWER once to turn on or off a home entertainment device. Press AUD, VCR, TV, or CBL once to select a home entertainment device to control. Each device key has an embedded LED (red light) that blinks upon selection and indicates that the remote control is working and is sending signals. Use GUIDE to display the program guide. Press MENU once to display the available interactive services.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 6 FEATURES AND FUNCTIONS Key Charts (continued) After programming, press MACRO once to run a macro (see Using Macros on page 17). Use EXIT to exit out of your cable converter’s menu and guide. Use A, B, or C to access additional cable features (see your cable converter’s manual). Use DAY+ (or DAY-) to move a day forward (or back) on your cable converter’s program guide. Use VOL+ (or VOL-) to raise (or lower) the audio volume.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 7 Use TV/VCR to switch the TV input to view video or TV programs. For amplifiers/receivers, use this key to select input or output. In all modes except CBL, use these keys to control a VCR, DVD player, or PVR. To record in the VCR mode, press REC twice. In the CBL mode, use these keys except REC to control VOD (Video On Demand), if available. INSTALLING BATTERIES ❶ ❷ ❸ 1. On the back of the remote control, push the tab and lift off the battery cover.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 8 INSTALLING BATTERIES (continued) 2. Obtain two (2) new AA alkaline batteries. Match the + and – marks with those in the battery case, then insert the new batteries. 3. Align the cover’s keys with the case’s holes and press the cover back into place. The tab should click when the cover is locked. 4. Test the unit by pressing POWER and any mode key (e.g., TV). If batteries are inserted correctly, the selected mode key will blink once.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 9 NOTE: If the selected mode key emits a long blink, the code is invalid. Repeat steps 2 and 3 and try entering the same code again. 4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code (see Searching For Your Code on page 11).
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 10 PROGRAMMING TV/VCR COMBO CONTROL If you own a TV/VCR Combo, perform the following instructions to control this device: 1. Turn on your TV/VCR Combo and insert a video cassette. 2. On the remote control, press VCR once. Press and hold SETUP until the VCR key blinks twice, then release SETUP. 3. Use the Setup Codes For TV/VCR Combos (on page 48) to locate the brand name and then enter the first four-digit code for your TV/VCR Combo.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 11 SEARCHING FOR YOUR CODE If your home entertainment device does not respond to the Atlas Universal Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. NOTE: To search for a code in the CBL mode, you’ll first need to unlock the cable ID Lock – see “Programming ID Lock” on page 13. For example, to search for a code for your TV: 1. Turn on your TV. 2.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 12 CHECKING THE CODES If you have set up the Atlas Universal Remote Control using the Searching For Your Code procedure (on the previous page), you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV: 1. On the remote control, press TV once. Then press and hold SETUP until the TV key blinks twice, then release SETUP. 2. Enter 9 - 9 - 0. The TV key will blink twice. 3.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 13 PROGRAMMING ID LOCK The Atlas Universal Remote Control is preprogrammed and locked at the factory to operate a Scientific Atlanta cable converter. However, if you have another brand or model of cable converter and interactive service that you would like to control, then you’ll need to perform the following steps to unlock the cable ID Lock, enter in a new manufacturer’s code, and lock the ID Lock again. 1. Turn on the cable converter. 2.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 14 PROGRAMMING CHANNEL CONTROL LOCK By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys* are 0 ~ 9, CH+, CH-, ENTER, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes. *NOTE: This feature does not affect the AUD mode.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 15 USING THE MASTER POWER KEY The Atlas Universal Remote Control has a unique feature that allows you to sequentially turn on or off all of your home entertainment devices with a single key press. NOTE: MASTER POWER only works in the CBL mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing MASTER POWER once will turn on or off the selected device. To Program The Master Power Key: 1.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 16 RE-ASSIGNING DEVICE KEYS The Atlas Universal Remote Control can be set up to control a second TV or VCR, or any combination of up to four home entertainment devices. For example, to have the unit control a TV, a Cable Converter, and two VCRs, you will need to re-assign the unused AUD key to operate the second VCR as follows: 1. On the remote control, press VCR once. Then press and hold SETUP until the VCR key blinks twice, then release SETUP. 2.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 17 USING MACROS With programming,the MACRO key on your Atlas Universal Remote Control can be setup to perform repetitive, timeconsuming operations through the press of a single key. A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press (see examples below). Moreover, the MACRO key can hold up to three macros with up to 15 key presses each.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 18 USING MACROS (continued) To Clear A Macro: 1. On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP. 2. Enter 9 - 9 - 5. The last-selected device key will blink twice. 3. Press MACRO once. 4. Press and hold SETUP until the last-selected device key blinks twice, then release SETUP. NOTE: A macro will be cleared in the order it was originally stored.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 19 4. Repeat steps 1 through 3 (of this section) for each device you want volume to be unlocked. 5. Now, after you select a device that has volume unlocked (e.g., CBL), pressing VOL+, VOL–, or MUTE, will control the device’s volume only in its own mode. To Unlock All Volume Control (Global Volume Unlock): NOTE: Performing these instructions will set independent volume control for all programmed devices (e.g.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 20 TROUBLESHOOTING PROBLEM: Mode key does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: Mode key blinks when you press a key, but home entertainment device does not respond. SOLUTION: Make sure you are aiming the remote control at your home entertainment device and that you are within 15 feet of the device you are trying to control.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 21 INSTRUCTIONS TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 22 TABLA DE CONTENIDOS Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Características Y Funciones . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Cuadros De Teclas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Instalación De Las Baterías . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Programación Del Control De Dispositivos . . . . . . . . . . . . . .
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 23 INTRODUCCIÓN El control remoto universal para cable y 4-Dispositivos Atlas de Universal Electronics es nuestro control remoto universal de última generación. Su sofisticada tecnología le permitirá reunir todos los controles remotos de sus dispositivos de entretenimiento doméstico en un único aparato de fácil manejo. Además, incluye funciones avanzadas como: • Preprogramación para funcionar con el convertidor de cable suministrado por su proveedor de cable.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 24 CARACTERÍSTICAS Y FUNCIONES Refiérase a la ilustración mostrada más adelante para ubicar las funciones del Control Remoto Universal Atlas y estudie a continuación los Cuadros De Teclas (en las dos páginas siguientes) para aprender a usar cada una de ellas.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 25 Cuadros De Teclas Use SETUP para todas las secuencias de programación. Presione POWER una vez para encender o apagar un dispositivo de entretenimiento doméstico. Presione AUD, VCR, TV, o CBL para seleccionar el dispositivo que desea controlar. Cada tecla cuenta con un LED (luz roja) que parpadea cuando ésta es usada e indica que el control remoto está funcionando y enviando señales. Use GUIDE para mostrar la guía de programas.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 26 CARACTERÍSTICAS Y FUNCIONES Cuadros De Teclas (continuación) Use DAY+ (o DAY-) para avanzar o retroceder un día en su guía de programas del convertidor de cable. Use VOL+ (or VOL-) para subir o bajar el volumen del sonido. Presione LAST una vez para volver al último canal. Para PVRs, use LAST para seleccionar vídeo en directo o grabado. Use FAV para rotar por sus canales favoritos almacenados en el convertidor de cable.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 27 En todos los modos excepto CBL,use estas teclas para controlar un VCR, reproductor de DVD o PVR.Para grabar en el modo VCR,presione REC dos veces. Use estas teclas (excepto REC) en el modo CBL para controlar el VOD (Video On Demand), en los casos en que esté disponible. INSTALACIÓN DE LAS BATERÍAS ❶ ❷ ❸ 1. En el reverso del control remoto, presione la pestaña y levante la tapa de las baterías. 2. Adquiera dos (2) baterías alcalinas AA nuevas.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 28 INSTALACIÓN DE BATERÍAS (continuación) 3. Alinee las teclas de la cubierta con los orificios de la carcasa y empuje la cubierta anterior hasta que quede en su sitio. La pestaña hará clic cuando la cubierta esté ajustada. 4. Pruebe la unidad presionando la tecla POWER o la de modo (p. ej., TV ). Si las baterías han sido introducidas correctamente, la tecla de modo seleccionada parpadeará una vez.
Atlas Manual rev2 E/Sp 4. 5/8/03 5:18 PM Page 29 Dirija el control remoto hacia el dispositivo y presione POWER una vez. El dispositivo debería apagarse. Si no ocurre así, repita los pasos 2 y 3, inténtelo con cada código de su marca hasta encontrar uno que funcione. Si aún así no funciona, intente buscar el código (consulte Búsqueda De Su Código en la página 31). NOTA: Si el dispositivo no tiene botón POWER, presione el botón (Play). 5.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 30 PROGRAMACIÓN DEL CONTROL DEL COMBO TV/VCR Si usted posee un combo TV/VCR, siga las siguientes instrucciones para utilizar el control con este dispositivo: 1. Encienda su combo TV/VCR e introduzca una cinta de video. 2. En el control remoto, presione VCR una vez. Presione y mantenga presionado SETUP hasta que la tecla VCR parpadee dos veces.A continuación, suelte el botón SETUP. 3.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 31 BÚSQUEDA DE SU CÓDIGO Si su dispositivo de entretenimiento doméstico no responde al Control Remoto Universal Atlas después de haber probado todos los códigos enumerados para su marca, o si su marca no aparece, intente la búsqueda de su código. NOTA: Para buscar un código en el modo CBL, deberá en primer lugar desbloquear el Bloqueo De ID dDe Cable (ver “Programación Del Bloqueo De ID” en la página 33). Por ejemplo, para buscar un código para su TV: 1.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 32 COMPROBACIÓN DE LOS CÓDIGOS Si usted ha configurado el Control Remoto Universal Atlas siguiendo el procedimiento Búsqueda De Su Código (página anterior), es probable que deba averiguar qué código de cuatro dígitos funciona con su dispositivo. Por ejemplo, para averiguar qué código funciona con su TV: 1. En el control remoto, presione TV una vez. Presione y mantenga presionado SETUP hasta que la tecla TV parpadee dos veces.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 33 PROGRAMACIÓN DEL BLOQUEO DE ID El Control Remoto Universal Atlas está preprogramado y bloqueado de fábrica para funcionar con el convertidor de cable Scientific Atlanta. Sin embargo, si usted tiene otra marca o modelo de convertidor de cable y servicio interactivo con los que le gustaría utilizar su control remoto, deberá entonces seguir los siguientes pasos para desbloquear el ID de cable, introducir un nuevo código de fabricante y bloquear el ID de nuevo.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 34 PROGRAMACIÓN DEL BLOQUEO DEL CONTROL DE CANAL Las funciones de control de canal del control remoto están por defecto bloqueadas en relación con el convertidor de cable. Las teclas afectadas* son 0 ~ 9, CH+, CH-, ENTER, y LAST. Esto evitará que usted cambie sin querer el canal de su TV o VCR.No obstante, puede desactivar esta función para permitir un acceso total a estas teclas en los modos TV y VCR. *NOTA: Esta función no afecta al modo AUD.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 35 UTILIZACIÓN DEL BOTÓN DE ENCENDIDO PRINCIPAL El Control Remoto Universal Atlas está equipado con una función exclusiva que le permite encender o apagarde manera secuencial todos sus dispositivos de entretenimiento doméstico con un único botón. NOTA: MASTER POWER solo funciona en el modo CBL. En caso de no estar programado, solo se encenderá o apagará el convertidor de cable.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 36 REASIGNACIÓN DE TECLAS DE DISPOSITIVOS El Control Remoto Universal Atlas puede configurarse para su utilización con un segundo dispositivo de TV o VCR,o cualquier otra combinación de cuatro dispositivos de entretenimiento doméstico. Por ejemplo,para utilizar el control con una TV,un convertidor de cable,y dos VCR,deberá reasignar la tecla AUD fuera de uso para utilizarla con el segundo VCR,de la siguiente manera: 1.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 37 UTILIZACIÓN DE MACROS Durante la programación, la tecla MACRO de su Control Remoto Universal Atlas puede ser configurada para realizar funciones repetitivas y lentas presionando una sola vez la tecla. Un macro puede ser utilizado para controlar el funcionamiento de un home theater (cine en casa), para configurar un canal o para otras múltiples funciones que usted quiera controlar con sólo una tecla (ver ejemplos más adelante).
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 38 UTILIZACIÓN DE MACROS (continuación) Eliminación De Macros: 1. En el control remoto, presione y mantenga presionado SETUP hasta que el dispositivo seleccionado en último lugar parpadee dos veces.A continuación, suelte el botón SETUP. 2. Presione 9 - 9 - 5. La tecla del dispositivo seleccionado en último lugar parpadeará dos veces. 3. Presione MACRO una vez. 4.
Atlas Manual rev2 E/Sp 5. 5/8/03 5:18 PM Page 39 Ahora bien, una vez haya seleccionado desbloquear el volumen de un dispositivo (p. ej., CBL), las teclas VOL+, VOL-, o MUTE controlarán el volumen del dispositivo sólo en el modo de éste. Desbloqueo De Todos Los Controles De Volumen (Desbloqueo De Volumen Total): NOTA: Estas instrucciones le permitirán configurar un control de volumen independiente para cada uno de los dispositivos programados (p.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 40 RESOLUCIÓN DE PROBLEMAS PROBLEMA: La tecla de modo no parpadea cuando presiona una tecla. SOLUCIÓN: Sustituya las baterías gastadas por dos (2) baterías alcalinas nuevas del tipo AA (consulte la página 27). PROBLEMA: La tecla de modo parpadea cuando presiona una tecla, pero el dispositivo de entretenimiento doméstico no responde.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 41 INSTRUCCIONES AL USUARIO Este equipo ha sido probado y se halló que cumple con los límites fijados para los dispositivos digitales de clase B, de acuerdo con la parte 15 de las Reglas de la FCC. Estos límites están diseñados para brindar una protección razonable contra las interferencias dañinas en una instalación residencial.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM MANUFACTURER’S CODES (CÓDIGOS DEL FABRICANTE) Setup Codes For Audio Amplifiers (Códigos De Configuración Para Amplificadores De Audio): GE Harman/Kardon JVC Luxman Marantz Nakamichi Optimus Philips Polk Audio Realistic Sansui Sony Soundesign Victor Wards Yamaha 0078 0892 0331 0165 0321, 0892 0321 0395 0892 0892 0395 0321 0689 0078 0331 0078 0354 Setup Codes For Audio Receivers (Códigos De Configuración Para Receptores De Audio): ADC Aiwa Bose Capetronic Carver Comp
Atlas Manual rev2 E/Sp Sansui Sharp Sony Soundesign Sunfire Technics Thorens Victor Wards Yamaha 5/8/03 5:18 PM Page 43 1089 0186 1058, 1158, 1258 0670 1313 0039, 1308, 1309, 1518 1189 0074 0014 0176, 0186, 1176 Setup Codes For Cable Converters (Códigos De Configuración Para Convertidores De Cable): ABC Americast Bell South General Instrument GoldStar Jerrold Memorex Motorola Panasonic Paragon Philips Pioneer Pulsar Quasar Runco Samsung Scientific Atlanta Starcom Supercable Toshiba Zenith 0003, 0008,
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 44 MANUFACTURER’S CODES (CÓDIGOS DEL FABRICANTE) Setup Codes For DVD Players, Continued (Códigos De Configuración Para Reproductores DVD, Continuación): GE GPX Go Video Gradiente Harman/Kardon Hitachi Hiteker JVC Kenwood Konka Magnavox Marantz Microsoft Mitsubishi Onkyo Optimus Oritron Panasonic Philips Pioneer Princeton Proscan RCA Samsung Sanyo Sharp Sherwood Sony Technics Techwood Theta Digital Toshiba Yamaha Zenith 0522, 0717 0769 0715 0651 0582 0573, 0664
Atlas Manual rev2 E/Sp America Action Ampro Anam Audiovox Baysonic Belcor Bell & Howell Bradford Brockwood Broksonic CXC Candle Carnivale Carver Celebrity Cineral Citizen Concerto Contec Craig Crosley Crown Curtis Mathes Daewoo Daytron Denon Dumont Dwin Electroband Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter GoldStar Gradiente Grunpy Hallmark Harley Davidson Harman/Kardon Harvard Hitachi Infinity Inteq JBL 5/8/03 5:18 PM Page 45 0180 0751 0180 0451, 0180, 0092, 0623 0180 0019 0154, 00
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 46 MANUFACTURER’S CODES (CÓDIGOS DEL FABRICANTE) Setup Codes For TVs, Continued (Códigos De Configuración Para Televisores, Continuación): JCB JVC KEC KTV Kenwood Konka LG LXI Logik Luxman MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Princeton Prism Proscan Proton Pulsar Quasar 0000 0053 0180 0180, 0
Atlas Manual rev2 E/Sp RCA RadioShack Realistic Runco SSS Sampo Samsung Samsux Sansei Sansui Sanyo Scimitsu Scotch Scott Sears Semivox Semp Sharp Shogun Signature Sony Soundesign Squareview Starlite Supreme Sylvania Symphonic TMK TNCi Tandy Technics Technol Ace Techwood Teknika Telefunken Toshiba Totevision Vector Research Victor Vidikron Vidtech Wards White Westinghouse Yamaha Zenith 5/8/03 5:18 PM Page 47 0047, 0051, 0093, 0019, 0090, 0135, 0679, 1047, 1147, 1347 0047, 0154, 0165, 0180, 0030, 0178, 0
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 48 MANUFACTURER’S CODES, continued (CÓDIGOS DEL FABRICANTE, continuación) Setup Codes For TV/VCR Combos (Códigos De Configuración Para Aparatos Combinados Televisor/Videograbadora): Broksonic Citizen Colt Curtis Mathes Daewoo Emerson Funai GE 0002, 0479 (for TV use 0463) 0278 0072 0035 (for TV use 0051) 0278 (for TV use 0624) 0002, 0278 (for TV use 0624), 0479 (for TV use 0463) 0000 0035 (for TV use 0051), 0048 (for TV use 0093), 0060 (for TV use 0047), 0240 G
Atlas Manual rev2 E/Sp Aiwa Akai America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic CCE Calix Canon Carver Cineral Citizen Colt Craig Curtis Mathes Cybernex Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson Fisher Fuji Funai GE Garrard Go Video GoldStar Gradiente HI-Q Harley Davidson Harman/Kardon Harwood Hitachi Hughes Net. Sys.
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 50 MANUFACTURER’S CODES (CÓDIGOS DEL FABRICANTE) Setup Codes For VCRs And PVRs, Continued (Códigos De Configuración Para Videograbadoras Y PVRs, Continuación): MGA MGN Technology MTC Magnasonic Magnavox Magnin Marantz Marta Matsushita Memorex Minolta Mitsubishi Motorola Multitech NEC Nikko Noblex Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Protec Pulsar Quasar RCA RadioShack Radix Randex Realistic Re
Atlas Manual rev2 E/Sp 5/8/03 Sanyo Scott Sears Semp Sharp Shintom Shogun Singer Sony Sylvania Symphonic TMK Tatung Teac Technics Teknika Thomas Tivo Toshiba Totevision Unitech Vector Vector Research Video Concepts Videosonic Wards 5:18 PM Page 51 0047, 0240, 0104 0184, 0045, 0121, 0043 0035, 0037, 0047, 0000, 0042, 0104 0045 0048 0072 0240 0072 0035, 0032, 0000, 0033, 0636 0035, 0081, 0000, 0043 0000 0240 0041 0000, 0041 0035, 0162 0035, 0037, 0000 0000 0618, 0636 0045, 0043 0037, 0240 0240 0045 0038
Atlas Manual rev2 E/Sp 5/8/03 5:18 PM Page 52