REMOTE USER GUIDE
Safety Instructions You must keep safety in mind while using this device. Keep these and any other instructions for future reference. Observe Warnings: Carefully follow all warnings on the device and in the operating instructions. Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat. Care and Use Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.
INSERT THE BATTERIES 1 Slide the remote battery cover off. 2 Insert two (2) AA batteries, making sure to match the plus (+) ends with the plus markings on the battery case (opposite each other). 3 Replace the remote battery cover.
PAIRING AND UNPAIRING THE REMOTE To Pair the Remote For the remote to work with the SAGE receiver, it must be paired. Use the following procedure to pair the remote. 1 Press the RESET button on SAGE’s back panel. 2 On SAGE’s remote, press the CAMERA and LIGHTS buttons simultaneously. SAGE confirms pairing is successful. To Unpair the Remote To unpair a remote from the SAGE receiver, press and hold the THERMOSTAT and BACK buttons simultaneously for 13 seconds. SAGE confirms unpairing is successful.
SAGE REMOTE Your SAGE remote provides you the following features to control and manage your home automation and security system.
AVOIDING RF INTERFERENCE Because your remote control uses 2.4 GHz ISM band radio frequencies (RF), you might experience interference from other devices transmitting nearby. The instructions in this section describe how to avoid such conflicts. Adjusting the Antenna SAGE communicates with its remote control(s) through an antenna that is located within SAGE. 1 2 Move the SAGE receiver to a different location. Place it on as high a surface as possible, above all other equipment if in an entertainment center.
TROUBLESHOOTING Use this information if you have a problem using the remote. To solve a particular problem do the following: • • • • Find the information that relates to the problem you are experiencing. Try the suggested solution for that problem. Make sure your remote control has fresh batteries. If you see the Remote Battery Low warning on your TV screen, it is time to change the batteries. Follow the instructions on page 1. Make sure you have a direct line of sight between the remote and the receiver.
TROUBLESHOOTING, CONTINUED My SAGE receiver does things even though I have not pressed any remote control buttons. What to do: Check the System Info screen to view a list of remotes paired to your SAGE receiver. Unpair the unwanted remote controls from this screen (see Pairing and Unpairing the Remote on page 2). See Avoiding RF Interference on page 4 for more information. My remote control is not working. What to do: Change the batteries as described on page 1.
LIMITED WARRANTY 7
EXCHANGE PROGRAM 8
IF YOU NEED HELP 1 2 Review this User Guide. Remote useR Guide TroubleshooTing Use this information if you have a problem using the remote. To solve a particular problem do the following: • • • • See Troubleshooting on page 5. Find the information that relates to the problem you are experiencing. Try the suggested solution for that problem. Make sure your remote contorl has fresh batteries. If you see the Remote Battery Low warning on your TV screen, it is time to change the batteries.
REGULATORY FACTORS This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this device may void your authority to operate this equipment.
SAGEbyHughes.com For all your customer needs visit SAGEbyHughes.
