DolphinTM II Water-Resistant Remote Control P/N 40418 Rev.
TABLE OF CONTENTS Introduction. . . . . . . . . . . . . . . . . . . . . . . . . .3 Features And Functions . . . . . . . . . . . . . . . . .4 Installing Batteries . . . . . . . . . . . . . . . . . . . . .6 Spa Addressing. . . . . . . . . . . . . . . . . . . . . . . .7 Programming TV Control . . . . . . . . . . . . . . . .8 Setup Codes for TVs . . . . . . . . . . . . . . . . . . . .8 Programming VCR Control . . . . . . . . . . . . . .12 Setup Codes for VCRs . . . . . . . . . . . . . . . . . .
INTRODUCTION The Universal Dolphin™ II Remote is Balboa’s latest generation remote control. It is designed with sophisticated technology that will allow you to consolidate many of your existing remote controls along with the entertainment system in your spa.
FEATURES AND FUNCTIONS Use the illustration below to locate the Dolphin™ II RemotE features and study the key locations (on these two pages) to learn how they function.
Press POWER once to turn on or off the selected home entertainment component. The LED (red light) blinks to show that the remote control is working and is sending signals. Use SETUP for all programming sequences. Press TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD once to select a home entertainment component to control. See next page for descriptions of the buttons in this circular area of the remote. Use volume + (or volume -) to raise (or lower) the sound volume.
FEATURES AND FUNCTIONS …Continued Use GUIDE to display the program guide. Use EXIT to exit out of an on-screen menu and guide. Use the four directional keys to move the cursor in the program guide and menu screens. Use SELECT to choose options, PPV events, and to tune programs from the program guide. Use INFO to display current channel and program information. Press MENU once to display an on-screen menu. INSTALLING BATTERIES (See illustration on opposite page) 1.
SPA ADDRESSING The Dolphin II technology is capable of eliminating interference that may occur when neighboring spa owners use Dolphin remotes. Important: This feature will not function if your spa is controlled by RF via the Command Center, or if your spa is controlled by IR. 1. If you notice the pumps, blower or light on your spa operating when your neighbor uses his Dolphin remote, check your spa manual to see if this feature is available on your system.
PROGRAMMING TV CONTROL Locate the brand name of your TV in the Setup Codes For TVs section below, and write it in the following space. TV Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your TV: 1. Turn on the TV. 2. On the Dolphin, press TV once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your TV.
CCD TV Celebrity Celera Changhong Cineral Citizen Clarion Concept Contec Craig Crosley Crown Crown Mustang Curtis Mathes CXC Daewoo Denon Dumont Durabrand Electroband Elektra Emerson Envision Farenheit Fisher Fujitsu Funai Futuretech Gateway GE Gibralter GoldStar Goodmans Gradiente Grundig Grunpy Hallmark Harman/Kardon Harvard Havermy Hello Kitty Himitsu Hisense Hitachi Infinity Initial Inteq IRT JBL JCB Jensen JVC KEC Kenwood Kioto KLH Kost KTV LG Loewe LXI M&S Magnavox Marantz 0463 0000 0765 0765 0451, 00
Matsushita Megapower Megatron Memorex MGA Micro Model Midland Misc Mitsubishi Monivision Motorola MTC Multitech NAD NEC Nesa Nikko Noblex Norcent NTC Onwa Optimus Optonica Orion Panasonic Penney Philco Philips Pilot Pioneer Portland Prima Princeton Prism Proscan Proton Pulsar Quasar RadioShack RCA Realistic Runco Sampo Samsung Sansei Sansui Sanyo Scotch Scott Sears Semivox Semp Sharp Sheng Chia Signet Sony Soundesign Squareview SSS Starlite Sunbrite Supreme SVA 10 0250, 0650 0700 0178, 0145 0154, 0463, 015
Sylvania Symphonic Tandy Tatung Technics Techwood Teknika Telefunken TMK TNC Tophouse Toshiba 0054, 0030, 0171 0180, 0171 0093 1756 0051, 0250 0051 0054, 0180, 0150, 0060, 0092 0702 0178 0017 0180 0154, 0156, 0093, 0060, 1156, 1356, 1656, 1704, 0650, 1256 TVS 0463 V Inc.
PROGRAMMING VCR CONTROL Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your VCR: 1. Turn on your VCR and insert a video cassette. 2. On the Dolphin, press VCR once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter the first four-digit code for your VCR.
Bell & Howell Broksonic Calix Canon Carver CCE Citizen Clarion Colt Craig Curtis Mathes CyberPower Cybernex Daewoo Dell Denon DirecTV Durabrand Dynatech Electrohome Electrophonic Emerex Emerson 0104 1479, 0184, 0121, 0209, 0002 0037 0035 0081 0072 1278, 0037 0889, 0888 0072 0037, 0047, 0240, 0072 1035, 0035, 0060, 0162 1972 0240 1278, 0045 1972 0042 0739 0039 0000 0037 0037 0032 1479, 1278, 0000, 0037, 0184, 0121, 0043, 0209, 0002 Fisher 0047, 0104 Fuji 0035, 0033 Funai 0000 Garrard 0000 Gateway 1972 GE 10
Minolta Mitsubishi Motorola MTC Multitech NEC Nikko Noblex Northgate Olympus Onkyo Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Protec Pulsar Quasar RadioShack Radix Randex RCA Realistic ReplayTV Runco Samsung Sanky Sansui Sanyo Scott Sears Semp Sharp Shintom Shogun Singer Sonic Blue Sony STS Sylvania Symphonic Systemax Tagar Systems Teac Technics Teknika Thomas Tivo TMK Toshiba Totevision Touch 14 0042 0807, 0067, 0043 0035, 0048 0000, 0240 0000, 0072 00
Unitech Vector Video Concepts Videomagic Videosonic Viewsonic Villain Wards 0240 0045 0045 0037 0240 1972 0000 0000, 0035, 0060, 0048, 0047, 0081, 0042, 0240, 0072 White Westinghouse 0209, 0072 XR-1000 0000, 0035, 0072, 0035 Zenith 1479, 0000, 0039, 0033, 0209 ZT Group 1972 PROGRAMMING CABLE CONVERTER (OR SATELLITE RECEIVER) CONTROL Locate the brand name of your Cable Converter (or Satellite Receiver) in the Setup Codes For Cable Converters (or Setup Codes For Satellite Receivers) section starting on the
Setup Codes for Cable Converters: ABC 0003, 0008 Americast 0899 Bell South 0899 Director 0476 General Instruments 0476, 0810, 0276, 0003 GoldStar 0144 Jerrold 0476, 0810, 0276, 0003 Memorex 0000 Motorola 0476, 1376, 0810, 0276 Pace 1877, 0237 Panasonic 0000 Paragon 0000 Philips 0305, 0317 Pioneer 0877, 1877, 0144, 0533 Pioneer 0533 Pulsar 0000 Quasar 0000 Runco 0000 Samsung 0144 Scientific Atlanta 0877, 1877, 0477, 0008 Starcom 0003 Supercable 0276 Torx 0003 Toshiba 0000 Zenith 0000, 0525, 0899 Setup Codes
Paysat Philips Proscan RadioShack RCA SKY Samsung Sanyo Sony Star Choice Tivo Toshiba UltimateTV Uniden Voom Zenith 0724 0749, 1749, 1142, 1442, 0724, 0722, 0856, 1076, 0099 0566, 0392 0869 0566, 0143, 0855, 0392, 1392 0856, 1856, 0099 1276, 1109 1219 0639, 1639, 1640 0869 1142, 1442, 1443, 1444 0749, 1749, 0790, 1285 1640, 1392 0724, 0722 0869 0856, 1856 PROGRAMMING DVD CONTROL Locate the brand name of your DVD player in the Setup Codes For DVD Players section below, and write it in the following space.
Setup Codes for DVD Players: Allegro Anaba Apex Digital 0869 0813 0672, 1020, 0794, 0796, 0797, 1100, 1004, 0755, 1056, 1061, 0830, 0717 Aspire Digital 1168 Audiovox 1072 Axion 1072 Blaupunkt 0717 Blue Parade 0571 Boss 1680 Broksonic 0695 Cinevision 0876, 0869 Clarion 0891, 0892, 1039, 1559 Coby 1086 Concept 1564 Curtis Mathes 1087 CyberHome 0816, 1023, 1024, 1117, 1129 Daewoo 1172, 0784, 0869, 0833 Denon 0490 Dual 1068, 1085 DVD2000 0521 Emerson 0591, 0675 Enterprise 0591 Fahrenheit 0887, 0890, 1054, 1066
Pioneer Polaroid Polk Audio Proscan Pyle Qwestar RCA 0525, 0571 1086, 1061 0539 0522 1300, 1746 0651 0522, 0571, 0822, 1132, 1022, 0717 Rio 0869 Rotel 0623 Rowa 0823 Sampo 0752 Samsung 0490, 0573, 0744, 0820, 1075 Sansui 0695 Sanyo 0670, 0873, 0695 Semp 0503 Sharp 0752, 0630 Sharper Image 1117 Sherwood 0770 Shinsonic 0533, 0839 Sonic Blue 1099, 0869 Sony 0533, 1033, 0864 Sound Mobile 1298 Starvision 1300 Superscan 0821 Sylvania 0675 Symphonic 0675 T-View 0813 Teac 0809 Technics 0490 Theta Digital 0571 Tosh
PROGRAMMING CD CONTROL Locate the brand name of your CD Player in the Setup Codes For CD Players section below, and write it in the following space. CD Player Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your CD Player: 1. Turn on the CD Player. 2. On the Dolphin, press CD once. Press and hold SETUP until the LED blinks twice, then release SETUP. 3.
KLH Koss Krell LG Linn LXI Magnavox Marantz Mark Levinson Matsui MCS Miro Mission MTC Nikko NSM Onkyo Optimus Panasonic Parasound Philips Pioneer Polk Audio Proton QED Quad Quasar Radio Shack RCA Realistic Rotel SAE Sansui Sanyo Scott Sears Sharp Sherwood Sonic Frontiers Sony Soundesign Symphonic TAG McLaren Tascam TDK Teac Technics Tivoli Audio Victor Wards Yamaha Yorx Zonda 1318 1317 0157 1208 0157 0305 0157, 0305 0626, 0029, 0157, 0180 1484 0157 0029 0000 0157 0420 0174, 0164, 0170 0157 0101, 0868 1063,
PROGRAMMING AUDIO CONTROL Using the Dolphin’s RCVR mode, you can also control an audio component, such as a stereo receiver or a stereo amplifier. Locate the brand name of your audio component in one of accompanying code lists. Write it in the appropriate space. Stereo Receiver Brand: or Stereo Amplifier Brand: The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program the Dolphin to operate your audio component: 1.
Apex Digital 1257, 1430 Audiotronic 1189 Audiovox 1390 Blaupunkt 1480, 1481, 1499 Bose 1229, 0639, 1253, 1355 Capetronic 0531 Carver 1189, 0189 Clarion 1377, 1669 Coby 1263 Dell 1383 Denon 1360 Farenheit 1900, 1598 Glory Horse 1263 Harman/Kardon 0110, 0189 Hitachi 1273 Honyas 1900 Integra 0135, 1298 JBL 0110, 1457 Jensen 0110, 1457, 2045 JVC 0074, 1263, 1400 Kenwood 1313, 1570, 1569, 0239, 0027, 0337, 0338 KHL 1664 KLH 1428, 1390, 1664, 1711 Koss 1366 Linn 0189 Magnadyne 1745 Magnavox 1189, 1269, 0531, 0189
Setup Codes for Stereo Amplifiers: Aiwa Bose Carver Curtis Mathes Denon Durabrand GE Harman/Kardon JVC Left Coast Lenoxx Linn Luxman Magnavox Marantz Nakamichi Optimus Panasonic Philips Pioneer Polk Audio RCA Realistic Sansui Sony Soundesign Technics Victor Wards Yamaha 0406 0674 0269 0300 0160 1561 0078 0892 0331 0892 1561 0269 0165 0269 0892, 0269, 0321 0321 0395, 0300 0308, 0521 0892, 0269 0013, 0300 0892, 0269 0300 0395 0321 0815, 0220, 0689 0078 0308, 0521 0331 0078, 0013 0354 Setup Codes for Automot
TV Aurora Systems TV Blaupunkt TV Casio TV CCD TV Clarion TV Fahrenheit TV JVC Monitor Signet TV 0801 0763 1205 0463 0180 1598 0731 0844 VCR Clarion VCR Clarion/Jenson VCR Samsung VCR Sony VCR 0800 0888 0889 0240 DVD Blaupunkt DVD Clarion DVD Fahrenheit DVD - 5 Fahrenheit DVD - 12T Fahrenheit DVD - 11N Fahrenheit DVD - 16T Honyas DVD KEC DVD T-View DVD 0717 0891, 0892, 1039 0890 1054 1066 0887 1142 1238 0813 SEARCHING FOR YOUR CODE If your TV, VCR, Cable Converter, Satellite or Audio Component does no
CHECKING THE CODES If you have set up the Dolphin using the “Searching For Your Code” procedure, you may need to find out which four-digit code is operating your equipment: For example, to find out which code is operating your TV: 1. Turn on your TV. 2. On the Dolphin, press and hold SETUP until the LED blinks twice, then release SETUP. 3. Enter 9 - 9 - 0. The LED will blink twice. 4. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of LED blinks (e.g.
REASSIGNING DEVICE KEYS The Dolphin can be set up to control a second TV or VCR, or any combination of four home entertainment components. For example, to have the Dolphin control a TV, a Cable Converter, and two VCRs, you will need to reassign the unused RCVR key to operate the second VCR as follows: 1. On the Dolphin, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 2. The LED will blink twice. 3. Press VCR once, then press RCVR once. 4.
SETTING VOLUME LOCK The Dolphin can be set so that the volume control buttons will always control the same device no matter which device mode is selected. If your TV is not remote controllable, or if you would like the volume to be controlled by a different component, you can change the Volume Lock setting to control volume through a non-associated mode (e.g., through the cable in the TV mode). To Change Volume Lock to the CBL/SAT mode: 1.
To Change Volume Lock to the CD mode: 1. On the Dolphin, press and hold SETUP until the LED blinks twice, then release SETUP. 2. Enter 9 - 9 - 3 and then press CD once. The LED will blink twice. 3. Now, whenever you press Volume +, Volume –, or MUTE on the Dolphin, volume will be controlled by your CD Player. To Change Volume Lock to the RCVR mode: NOTE: Performing these steps will allow you to access the volume control of your audio component in all modes. 1.
USING THE LEARNING FEATURE You can program the non-spa buttons to add functions that are unique to your home entertainment devices (e.g., VCR Tracking Up or Down). NOTE: PLEASE HAVE YOUR ORIGINAL REMOTE CONTROLS ON HAND BEFORE PROGRAMMING THE LEARNING FEATURE. BE SURE TO PRESS EACH KEY WITHIN 10 SECONDS OF THE PREVIOUS ENTRY. IF 10 SECONDS PASS BETWEEN ENTRIES, THE REMOTE CONTROL WILL EXIT THE PROGRAMMING MODE. Programming A Learning Key 1. Place your original remote control (e.g.
4. Press the learning key (e.g., Guide) twice. The LED will blink twice after the second press. 5. To clear additional functions stored on other learning keys, repeat steps 1 through 4 (in this section). Feature Reset This function will clear all volume lock and learned key functions. It does not clear device codes and mode reassignments. 1. On the Dolphin, press and hold SETUP until the LED (red light) blinks twice, then release SETUP. 2. Enter 9 - 8 - 0. The LED will blink 4 times when reset is complete..
USING THE IR/RF COMMAND CENTER The Dolphin Remote Control (URC-9811) can be used with an optional IR/RF Command Center which receives radio-frequency (RF) signals from the Dolphin, up to 100 feet away*. Once it is set up, the IR/RF Command Center will convert the RF signals into Infrared (IR) signals to control your home theater devices. NOTE: The Dolphin remote control transmits both an IR and an RF signal simultaneously.
2. Run the IR Signal Extension Cord to the device that is not in line-of-sight of the IR/RF Command Center. 3. Using the supplied double-sided tape, attach the IR Signal Extension Cord so that its LED is over or next to the IR sensor of your home theater device. 4. Test the installation by again taking the Dolphin into another room in your home. Select a device key (e.g., TV) and press it once. Then press POWER once.
SPECIFICATIONS Remote Control Power 2 AA Batteries IR/RF Command Center Power 120 VAC Remote Control to IR/RF Command Center RF Range up to 100 Feet (30.48 m)* IR/RF Command Center to Audio/Visual Equipment Range Up to 30 Feet (7.62 m) ± 30° Remote Control Dimensions (H x W x D) 9-2⁄16 x 2-10⁄16 x 1-3⁄16 in. 232 x 65 x 31 mm IR/RF Command Center Dimensions (H x W x D) 1-9⁄16 x 5 -1⁄16 x 4 in 39.7 x 128.6 x 101.6 mm Remote Control Weight (without Batteries) 8 oz (220 g) IR/RF Command Center Weight 10.
COMPLIANCE WITH FCC RULES AND REGULATIONS This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and radiates radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
TROUBLESHOOTING PROBLEM: LED does not blink when you press a key. SOLUTION: Replace the batteries with two (2) new AA alkaline batteries (see page 7). PROBLEM: LED blinks when you press a key, but home entertainment component does not respond. SOLUTION: Make sure you are aiming the Dolphin at your home entertainment component and that you are within 15 feet of the component you are trying to control. PROBLEM: The Dolphin does not control home entertainment components or commands are not performing properly.
