U 4153
Quick Installation Guide. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
content English U 4153 PAG.
Quick Installation Guide. Follow next steps for the correct installation of this receiver. Step 1: Connections Connect a coaxial cable from the output socket to the “Antenna Input” connector. Connect a coaxial cable from the “Loop out” connector at the receiver to your TV input connector as it is shown in Scheme1. This receiver has not built in modulator so it has to be connected to the TV through a SCART cable.
Quick Installation Guide. Step 2: Basic configuration of the receiver image 1 Step 3: Time configuration It is recommended to setup the clock before starting to enjoy the receiver, because correct time maybe is required by some applications. Please complete following options: Press the [Menu] key of the remote control for appearing the main menu. Select the “System Configuration” option and confirm pressing [OK].
Quick Installation Guide. image 2 image 3 on the TV. For setting up the time, please complete: 1.Country: Confirm that the correct country has been selected during the quick installation. 2.GMT Usage: this option will allow you to select if the date and time will be introduced manually (Use GMT: Off), if you prefer that it will be automatic by country (Use GMT: By Region) or if you wish to introduce the offset respect GMT manually (Use GMT: Defined by user). 3.
Quick Installation Guide. TV Channel List: This option shows the list of TV stored channels. Radio Channel List: This option shows the list of Radio stored channels. Delete All Favourites: This option deletes all the favourite lists created. Delete All Channels: This option deletes all TV and Radio stored channels. Auto Scan: This option make a full scan of all TV and Radio channels received. Channel Scan: This option make a compete scan of only one Multiplex.
Quick Installation Guide. OSD Language: This option allows selecting different menu and options languages. TV System: This option allows choosing the video Standard and other parameters of the screen. Start up Service: This option allows setting the receiver to start in a predefined channel. Region and Time: In this option, the time of the receiver and user region or country can be configured. Timer Setting: Timer setting menu.
INDEX PAG. English 1. Remote control & panel description 1.1.Front panel description.................................................................................12 1.2.Rear panel description.................................................................................12 1.3.Remote control description........................................................................13 2. Hotkey 2.1.Standby.................................................................................................13 2.
INDEX 5. SYstem setup 5.1.OSD language....................................................................................22 5.2.TV system...................................................................................22 5.3.Start up service...................................................................................23 5.4.Region and time.......................................................................................23 5.5.Timer setting........................................................
SAFETY PRECAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to “dangerous voltage” and to prevent from a risk of electric shock Warning: To reduce the risk of electric shock, don’t open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing). PAG.
REMOTE CONTROL & PANEL DESCRIPTION 1. DESCRIPCIÓN DEL PANELES Y MANDO A DISTANCIA 1 2 3 4 5 6 1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver, you have to use the switch on the back of the receiver. 2. POWER LED: Indicates that the mains voltage is available. 3. LOCK LED: Indicates a sufficient signal level at the IF IN input. 4. DISPLAY: 4 Digits to display the program numbers. 5. IR-SENSOR: Reception sensor for the IR remote control signals. 6.
REMOTE CONTROL & PANEL DESCRIPTION 1.3 REMOTE CONTROL DESCRIPTION 1 2 3 4 5 8 6 9 7 10 11 12 13 15 14 16 1- Standby 2- CH+/CH3- Vol+/Vol4- Número 5- TV/Radio 6- OK 7- Audio 8- EPG 9- FAV+/10- Exit 11- Menú 12- Mute 13- Recall/Back 14- FAV 15- Información 16- Pup / Pdw 17- TTX 18- Zoom 19- Multiventana 17 20 21 19 18 2.1 Standby 1.Press [Power] button to switch from TV mode to Standby mode 2.In Standby mode press [Power] button again to switch back to TV mode.
BASIC OPERATIONS 2.5 TV/Radio In TV mode, press [TV/RADIO] to switch to Radio mode. In Radio mode press [TV/RADIO] again to switch back to TV mode. osd 1 2.6 OK 1. In full screen, press [OK] key can enter “Channel List”, please refer to TV Channel List for detail information. 2.7 AUDIO 1.In TV mode, press the [Audio] button to open the Audio Mode window. ( OSD 1) 2.8 EPG osd 2 1.The STB has an Electronic Program Guide (EPG) to help you navigate channels through all the possible viewing options.
BASIC OPERATIONS 1. In TV mode press the [Favorite] button to display the Favorite Group window on the screen as the picture beside shows (OSD 5). 2. In the Favorite Group window you can select the desired favorite channel with [Channel Up / Down] and confirm it with [OK] to switch to it. In bigger groups you can navigate with [Page Up/Page Down]. 3. With [Volume Up / Down] you can select different Favorite Groups. 4. Press [Exit] to close the Favorite Group window. 2.
BASIC OPERATIONS 3.CHANNEL osd 6 Press [Menu] in the TV mode to enter the main menu. 1. Press to select the Channel item. 2. Press [OK] to enter the selected item. In the Channel menu: 1. Press to select the wanted menu item among TV Channel, Radio Channel and Delete All. 2. Press [OK] to enter the selected item. 3.1 TV CHANNEL LIST osd 7 osd 8 English osd 9 When you enter to “Channel List” menu, there will display the screen like below (OSD 8). 1.
MENU OPERATIONS 2. After input each character, the program list on the left will search the channel according your input, and list the matched channel. 3. Press [Exit] key can close “Find” window and you can select channel from the channels list directly. 3.1.4 Sort osd 12 osd 13 1. Press number key [4] can open the “Sort” window like above (OSD 12). There are five kinds of sorting ways. You can press [ ] key to move highlight and press [OK] key to confirm you selection 2.
MENU OPERATIONS osd 17 enter edit box like below (OSD 17): 1 .On the “Name” item, press [OK] key can display keypad to edit the name of selected channel. 2. “Video PID”, “Audio PID” and “PCR PID” items are grey and can not be edited. 3. After modification, move highlight to “Save” item and press [OK] key can save the modified value and exit “Edit” mode. Otherwise, move highlight to [Exit] item and press [OK] key can exit “Edit” mode and won’t save any modification. 3.1.5.5 Delete all 1.
MENU OPERATIONS 4.INSTALLATIÓN osd 23 When you enter to “Installation” menu, there will display the screen like below (OSD 23): In “Installation” menu; 1.Press [ ] key to select menu pages among Channel, Installation, System and Tools. 2.Press [ ] key to select menu items among each items. 3.Press [OK] key to enter the selected item. 4.1.AUTO SCAN osd 23 4.2 CHANNEL SCAN When you enter to “Channel Scan” menu, there will display the screen like below (OSD 25): 1. There is two mode.
MENU OPERATIONS 4.4 AERIAL ADJUSTAMENT When you enter to “Aerial Adjustment” menu, there will display the screen like below (OS28): In Aerial Adjustment mode: 1. Ch No.: Press [ ] to select the Ch No. The range is from 2 to 69. 2. Tuner Power: On / Off osd 26 osd 27 English osd 28 PAG.
MENU OPERATIONS 5. SYSTEM SETUP osd 29 When you enter to “System Setup” menu, you will see the screen like below (OSD 30): In “System Setup” menu: 1.Press [ ] key to select menu pages among Channel, Installation, System and Tools. 2.Press [ ] key to select menu items among each items. 3.Press [OK] key to enter the selected item. 5.1 OSD LANGUAGE osd 30 osd 32 5.2 TV SYSTEM When you enter to “TV System” menu, you will see the screen like below (OSD 32): 1.
MENU OPERATIONS can press [ ] key to select each mode circularly. 5. LCN Mode can control the channel whether sort by the information in the streams. The options is: On / Off. You [Left/Right] key to select each mode circularly. 6.VCR Loopthrought: If there is a VCR connected to the receiver and, the receiver is connected to the TV, user can choose what prefer to watch on TV when both equipments are connected at the same time. If the selection is “VCR master”, the VCR will be showed even the receiver is on.
MENU OPERATIONS to switch. •Time display function can control whether the time will be displayed on screen or not. •Press [Exit] 5.5 TIMER SETTING When you enter “Timer Setting”, you will see the window like below(OSD 35): osd 35 2.Sleep Timer When you enter “Sleep Timer”, you will see the window like below (OSD 38): PAG. 23 English osd 36 1. Program Timer: Select “Program Timer” item and pres [OK] key to enter “Program Timer” menu.
MENU OPERATIONS *Press ] key to switch the Sleep Time parameter. The option is like below: Off /10min /30min /60min /90min /120min *Sleep Timer can set the system enter standby mode automatically after the user setting time. *Press [Exit] can exit the current menu. osd 37 3. Load Default Timer Setting When you enter “Load Default Timer Setting”, you will see the window like below: •Press [OK] key on “Load Default Timer Setting”, it will show “Inpute Password” dialogue.
MENU OPERATIONS osd 40 osd41 5.8. standby mode When you select this option, you will see a screen like beside (OSD 41): 1. Low Power Consumption: At this option, you could enable / disable the low power consumption mode. This mode allows saving current consumption when the receiver is stand-by. Low power consumption mode only can be enabled when the VCR Loopthrought option (see point 5.2.) is STB master selected.
MENU OPERATIONS 6.TOOLS osd 43 When you switch to “Tools” menu, you will see a screen like below(OSD 44): In “Tools” menu: 1. Press [ ] key to select menu pages among Channel, Installation, System and Tools. 2. Press [ ] key to select menu items among each items. 3. Press [OK] key to enter the selected item. 6.1 INFORMATION 1. When you enter to “Information” menu, you will see a screen like above (OSD 45).
MENU OPERATIONS • Moving highlight to “Start” and press [OK] key to start the game. • Moving highlight to [Cancel] keys and press [OK] key to draw back from the game. • Start on the game: • [ /------- use these arrow keys to guide chessman. • [OK] — set chessman. • [Exit] — Quit game and draw back to “Game” menu. 6.3 LOAD FACTORY DEFAULT When you press [OK] key In the “Load Factory Default” item: 1. There will pop a dialogue for you to enter the password, and the default password is “0000”. 2.
TECHNICAL SPECIFICATIONS Video Decoding Compatible MPEG-2 & MEPG-1 Bit rate Max 15Mbps Output PAL/NTSC Aspect ratio 4:3, 16:9, Auto Active pixel 720x480 @ 30fps; 720x576 @25fps Output connector Euroconector, RCA Audio Decoding MPEG-2/MEPG -1 Layer I & II Sampling rate 32 /44,1/ 48 Khz Output connector Euroconector , RCA, SPDIF coaxial Demodulator Demodulation COFDM 2k, 8k Guard 1/4, 1/8 , 1/16, 1/32 Input signal Frequency VHF-UHF Input Level - 78 dBm – 20 dBm Miscellanous Supply
PART OF THE DECLARATION OF CONFORMITY CE “We , univers by fte, declare that the product u4153 is in conformity with following Directives LVD 73/23/EEC EMC 89/336/EEC as last amended by 93/68/EEC” English PAG.