uTV™ guide
uTV™ description The uTV is connected tou your TV (or any other audio source) and wirelessly sends audio signals from your TV to your headset within a range of up to 30 meters (100 ft). The Unitron uTV connects your A2DP Headset wirelessly to your TV or other audio devices. hearing instrument (f) (g) Legend Buttons (a) ON/OFF button (b) Volume control (up) (c) Volume control (down) up to 30 meters (100 ft) uTV cable headset Inputs (d) Power input (mini-USB) (e) Audio input (3.
Installation Use the RCA/Cinch cable (i) to connect the uTV to the TV: Step 1: Connecting the uTV To connect the power supply (h): Place the uTV next to your TV. Connect the mini-USB plug of the power suppply to the power input (”Power”) of the uTV. Plug the power supply into the wall socket. Connect the 3.5 mm stereo plug to the audio input (”Audio IN”) of the uTV. Connect the red and white RCA/Cinch plugs to the matching red and white RCA/Cinch output sockets on your TV.
You can also connect your uTV to the 3.5 mm headset socket of your TV, using the 3.5 mm audio cable (k): Connect the 3.5 mm stereo plug to the audio input of the uTV (”Audio IN”). Plug the other end into the headset output socket of your TV. (k) 6 When connecting the uTV to the 3.5 mm headset socket of your TV you are able to adjust the volume via your TV remote control. Many TVs will switch off their loudspeakers when plugging the 3.
Step 2: Switching on 1. Switch on the uTV by a short press of the ON/OFF button (a) as shown in fig. 2. The status light (g) will illuminate green iniatially and may switch to blue later. ● Initiate the pairing process on your headset as stated in its manual. ● If the uTV basestation status light (g) is not flashing blue already, press the ON/OFF button (a) for 5 seconds until the Bluetooth indicator (g) is fast flashing blue. (g) (a) fig.
If the headset moves out of range of the uTV the wireless audio transmission will be terminated. If the headset is then moved back into range of the uTV, it will automatically resume. First, set the volume of the TV speakers at the level to suit other viewers. It may take up to 10 seconds until the streaming resumes. The Bluetooth streaming light indicator on the uTV (g) should be solid blue during streaming.
Step 6: Switching off uTV Declaration of Conformity To switch off the devices: Hereby Unitron declares that this uTV meets the requirements of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC. The full text of the Declaration of Conformity can be obtained from the address below. ● To end the transmission of the TV audio signal, switch off the uTV by pressing the ON/OFF button (a) as shown in fig. 7. (a) fig. 7 Manufacturer: Unitron Hearing Ltd. 20 Beasley Drive, P.O.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1.) this device may not cause harmful interference, and 2.) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this device not expressly approved by Unitron may void the FCC authorization to operate this device.
Unitron Distributors CORPORATE OFFICE / INTERNATIONAL 20 Beasley Drive, P.O. Box 9017, Kitchener, ON N2G4X1 Canada AUSTRALIA Level 2, Norwest Quay, 21 Solent Circuit, Baulkham Hills, NSW, NSW 2153 BELGIUM Baron de Vironlaan, 60 b-1700 Dilbeek CANADA 20 Beasley Drive, P.O. Box 9017, Kitchener, ON N2G4X1 CHINA No. 78, Qi Ming Road, Export Processing Zone District B, Suzhou Industrial Park, P.R.
