Ceramic Fiber Blanket Safety Data Sheet Page 1 of 5 MSDS Number: INS-051418 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Ceramic Fiber Blanket MSDS Number: INS-051418 Revision Date: 3-23-16 Safety Data Sheet Page 2 of 5 5. FIRE FIGHTING MEASURES Non-combustible (does not burn) product. Auto-ignition temperature: none NFPA Unusual Hazards: none Unusual fire and explosion hazards: none Extinguishing Media: use proper extinguishing media for the surrounding fire. Fire fighting protective equipment: wear full bunker gear including positive pressure selfcontained breathing apparatus. 6.
Ceramic Fiber Blanket MSDS Number: INS-051418 Revision Date: 3-23-16 Safety Data Sheet Page 3 of 5 Respirable dust 5mg/m3 ACGIH particulates not otherwise classified (PNOC)—INHALABLE PARTICULATE: 10mg/m3. RESPIRABLE PARTICULATE: 3mg/m3 Other Occupational Exposure Levels (OEL) RCF-related occupational exposure limits vary from country to country. Listed here are a few regulatory OEL examples: Australia--0.5f/cc; Austria—0.5f/cc; Canada—0.5 to 1 f/cc; Denmark—1 f/cc France—0.6 f/cc; Germany—0.
Ceramic Fiber Blanket MSDS Number: INS-051418 Revision Date: 3-23-16 Safety Data Sheet Page 4 of 5 Melting Pt.: 3200°F Vapor Density: N/A 10. STABILITY AND REACTIVITY Chemical stability: stable under conditions of normal use. Incompatibility: hydrofluoric acid, and concentrated alkali. 11.
Ceramic Fiber Blanket MSDS Number: INS-051418 Revision Date: 3-23-16 Safety Data Sheet Page 5 of 5 pollutants. Toxic Substances Control Act (TSCA): all substances in this product are listed, as required, on the TSCA chemical inventory. International Regulations: Canadian Workplace Hazardous Materials Information System (WHMIS): No Canadian Workplace Hazardous Materials Information System categories apply to this product.
Fiberglass Tape MSDS Number: FAS-1516 Revision Date: 3-23-16 Safety Data Sheet Page 1 of 6 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Fiberglass Tape Safety Data Sheet Page 2 of 6 MSDS Number: FAS-1516 Revision Date: 3-23-16 P337+313 - Get medical advice/attention 3. COMPOSITION/INFORMATION ON INGREDIENTS Common Name Non-Hazardous Ingredients Fiber Glass Continuous Filament (non respirable) Size Polyester Yarn Chemical Name CAS No. Wt. % Fibrous Glass 65997-17-3 94-100 Size Polyester Yarn None None 0-2 0-4 Note: See Section 8 of MSDS for exposure limit data for these ingredients. 4.
Fiberglass Tape Safety Data Sheet Page 3 of 6 MSDS Number: FAS-1516 Revision Date: 3-23-16 carbon dioxide and water. Other undetermined compounds could be released in small quantities. 6. ACCIDENTAL RELEASE MEASURES Land Spill: Scoop up material and put into suitable container for disposal as a nonhazardous waste. Water Spill: This material will sink and disperse along the bottom of waterways and ponds. It can not easily be removed after it is waterborne; however, the material is nonhazardous in water.
Fiberglass Tape MSDS Number: FAS-1516 Revision Date: 3-23-16 Safety Data Sheet Page 4 of 6 environments) or equivalent should be used when: high dust levels are encountered; the level of glass fibers in the air exceeds the OSHA permissible limits; or if irritation occurs. Use respiratory protection in accordance with your company’s respiratory protection program, local regulations and OSHA regulations under 29 CFR 1910.134.
Fiberglass Tape Safety Data Sheet Page 5 of 6 MSDS Number: FAS-1516 Revision Date: 3-23-16 CARCINOGENICITY: The table below indicates whether or not each agency has listed each ingredients as a carcinogen: Ingredient Fiber Glass Continuous Filament Size Polyester Yarn Fiber Glass Continuous Filament Size Polyester Yarn ACGIH A4 IARC 3 NTP No OSHA No No No No No No No No No LD50 Oral (g/kg) LD50 Dermal (g/kg) LC50 Inhalation (ppm, 8 hrs.
Fiberglass Tape Safety Data Sheet Page 6 of 6 MSDS Number: FAS-1516 Revision Date: 3-23-16 RQ: None Quantity Limitations: Passenger Aircraft: None Cargo Aircraft: None Marine Pollutants: None Freight Description: None Hazardous Material Shipping Description: None 15. REGULATORY INFORMATION TSCA Status: Each ingredient is on the Inventory. NSR Status (Canada): Each ingredient is on the DSL.
Black Nomex Thread Safety Data Sheet Page 1 of 6 MSDS Number: THRD-08 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Black Nomex Thread Common Name(s): Nomex Aramid Fire Retardant Thread, Nomex Sewing Thread EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Black Nomex Thread MSDS Number: THRD-08 Revision Date: 3-23-16 Safety Data Sheet Page 2 of 6 4. FIRST AID MEASURES General advice: No hazards, which require special first aid measures. If symptoms persist, call a physician. If irritation occurs, flush area thoroughly with water. 5. FIRE FIGHTING MEASURES Flammable Properties Flash point: not applicable Thermal decomposition: > 300 °C (> 572 °F) Fire and Explosion Hazard: Hazardous decomposition products formed under fire conditions.
Black Nomex Thread Safety Data Sheet Page 3 of 6 MSDS Number: THRD-08 Revision Date: 3-23-16 Provide grounding of equipment to prevent static build-up. Personal protective equipment Eye protection: Safety glasses with side-shields Respiratory protection: When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Black Nomex Thread Safety Data Sheet Page 4 of 6 MSDS Number: THRD-08 Revision Date: 3-23-16 Incompatibility: Strong acids and strong bases Decomposition: Decomposition temperature: > 300 °C (> 572 °F). Hazardous decomposition products Carbon monoxide, nitrogen oxides (NOx), Hydrogen cyanide (hydrocyanic acid). 11.
Black Nomex Thread MSDS Number: THRD-08 Revision Date: 3-23-16 Safety Data Sheet Page 5 of 6 Repeated dose toxicity: Dermal Central nervous system depression, Liver effects, Skin effects Oral Pathologic changes, Stomach, Testes, Liver, Kidney, Abnormal decrease in number of red blood cells (anaemia) Inhalation Kidney effects, Liver effects, Retinal damage Carcinogenicity: Did not show carcinogenic effects in animal experiments. Mutagenicity: Did not cause genetic damage in cultured bacterial cells.
Black Nomex Thread MSDS Number: THRD-08 Revision Date: 3-23-16 Safety Data Sheet Page 6 of 6 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
White Nomex Thread Safety Data Sheet Page 1 of 6 MSDS Number: THRD-01 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: White Nomex Thread Common Name(s): Nomex Aramid Fire Retardant Thread, Nomex Sewing Thread EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
White Nomex Thread MSDS Number: THRD-01 Revision Date: 3-23-16 Safety Data Sheet Page 2 of 6 4. FIRST AID MEASURES General advice: No hazards, which require special first aid measures. If symptoms persist, call a physician. If irritation occurs, flush area thoroughly with water. 5. FIRE FIGHTING MEASURES Flammable Properties Flash point: not applicable Thermal decomposition: > 300 °C (> 572 °F) Fire and Explosion Hazard: Hazardous decomposition products formed under fire conditions.
White Nomex Thread Safety Data Sheet Page 3 of 6 MSDS Number: THRD-01 Revision Date: 3-23-16 Provide grounding of equipment to prevent static build-up. Personal protective equipment Eye protection: Safety glasses with side-shields Respiratory protection: When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
White Nomex Thread Safety Data Sheet Page 4 of 6 MSDS Number: THRD-01 Revision Date: 3-23-16 Incompatibility: Strong acids and strong bases Decomposition: Decomposition temperature: > 300 °C (> 572 °F). Hazardous decomposition products Carbon monoxide, nitrogen oxides (NOx), Hydrogen cyanide (hydrocyanic acid). 11.
White Nomex Thread MSDS Number: THRD-01 Revision Date: 3-23-16 Safety Data Sheet Page 5 of 6 Repeated dose toxicity: Dermal Central nervous system depression, Liver effects, Skin effects Oral Pathologic changes, Stomach, Testes, Liver, Kidney, Abnormal decrease in number of red blood cells (anaemia) Inhalation Kidney effects, Liver effects, Retinal damage Carcinogenicity: Did not show carcinogenic effects in animal experiments. Mutagenicity: Did not cause genetic damage in cultured bacterial cells.
White Nomex Thread MSDS Number: THRD-01 Revision Date: 3-23-16 Safety Data Sheet Page 6 of 6 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Yellow Nomex Thread Safety Data Sheet Page 1 of 6 MSDS Number: THRD-10 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Yellow Nomex Thread Common Name(s): Nomex Aramid Fire Retardant Thread, Nomex Sewing Thread EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Yellow Nomex Thread MSDS Number: THRD-10 Revision Date: 3-23-16 Safety Data Sheet Page 2 of 6 4. FIRST AID MEASURES General advice: No hazards, which require special first aid measures. If symptoms persist, call a physician. If irritation occurs, flush area thoroughly with water. 5. FIRE FIGHTING MEASURES Flammable Properties Flash point: not applicable Thermal decomposition: > 300 °C (> 572 °F) Fire and Explosion Hazard: Hazardous decomposition products formed under fire conditions.
Yellow Nomex Thread Safety Data Sheet Page 3 of 6 MSDS Number: THRD-10 Revision Date: 3-23-16 Provide grounding of equipment to prevent static build-up. Personal protective equipment Eye protection: Safety glasses with side-shields Respiratory protection: When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
Yellow Nomex Thread Safety Data Sheet Page 4 of 6 MSDS Number: THRD-10 Revision Date: 3-23-16 Incompatibility: Strong acids and strong bases Decomposition: Decomposition temperature: > 300 °C (> 572 °F). Hazardous decomposition products Carbon monoxide, nitrogen oxides (NOx), Hydrogen cyanide (hydrocyanic acid). 11.
Yellow Nomex Thread MSDS Number: THRD-10 Revision Date: 3-23-16 Safety Data Sheet Page 5 of 6 Repeated dose toxicity: Dermal Central nervous system depression, Liver effects, Skin effects Oral Pathologic changes, Stomach, Testes, Liver, Kidney, Abnormal decrease in number of red blood cells (anaemia) Inhalation Kidney effects, Liver effects, Retinal damage Carcinogenicity: Did not show carcinogenic effects in animal experiments. Mutagenicity: Did not cause genetic damage in cultured bacterial cells.
Yellow Nomex Thread MSDS Number: THRD-10 Revision Date: 3-23-16 Safety Data Sheet Page 6 of 6 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Green PTFE Coated Fiberglass Cloth Safety Data Sheet Page 1 of 4 MSDS Number: CL-24 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Green PTFE Coated Fiberglass Cloth Common Name(s): PTFE Coated Fiber Glass EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Green PTFE Coated Fiberglass Cloth Safety Data Sheet Page 2 of 4 MSDS Number: CL-24 Revision Date: 3-23-16 3. COMPOSITION/INFORMATION ON INGREDIENTS Ingredients: Fibrous Glass (CAS 65997-17-3)(65%-75%) Exposure Limits: OSHA PEL 15 mg/m3 (total), 5 mg/m3 (respirable). ACGIH TLV 1 f/cc Polytetrafluoroethylene (CAS 9002-84-0)(25%-35%) 4. FIRST AID MEASURES Inhalation: Remove person to fresh air. If condition persists, seek medical attention. Skin Contact: Rinse with copious quantities of cool water.
Green PTFE Coated Fiberglass Cloth MSDS Number: CL-24 Revision Date: 3-23-16 Safety Data Sheet Page 3 of 4 Personal Protective Equip: HMIS PP, B | Safety Glasses, Gloves Safety glasses; cotton gloves; long sleeve clothing Wash thoroughly with soap and water after handling. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Green Face with Tan Back Physical State: Solid Spec Grav. /Density: 1.6 Boiling Point: N/A Vapor Pressure: N/A pH: N/A Odor: No Odor Solubility: Negligible Freezing/Melting Pt.
Green PTFE Coated Fiberglass Cloth Safety Data Sheet Page 4 of 4 MSDS Number: CL-24 Revision Date: 3-23-16 15. REGULATORY INFORMATION COMPONENT / (CAS/PERC) / CODES *Polytetrafluoroethylene (9002840 n/a%) PA 16.
PTFE Coated Fiberglass Sewing Thread Safety Data Sheet Page 1 of 4 MSDS Number: THRD-09 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: PTFE Coated Fiberglass Sewing Thread Common Name(s): PTFE Coated Sewing Thread EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
PTFE Coated Fiberglass Sewing Thread Safety Data Sheet Page 2 of 4 MSDS Number: THRD-09 Revision Date: 3-23-16 4. FIRST AID MEASURES Inhalation: Remove person to fresh air. If condition persists, seek medical attention. Skin Contact: Rinse with copious quantities of cool water. If rash or itching persists, seek medical attention. Eye Contact: Rinse with water. Do not rub eyes. Seek medical attention. Ingestion: Not applicable. 5.
PTFE Coated Fiberglass Sewing Thread MSDS Number: THRD-09 Revision Date: 3-23-16 Safety Data Sheet Page 3 of 4 Spec Grav. /Density: 2.1 Boiling Point: N/A Vapor Pressure: N/A pH: N/A Odor: No Odor Solubility: Negligible Freezing/Melting Pt.: > 1000 F Vapor Density: N/A 10. STABILITY AND REACTIVITY Stability: Material is stable. Conditions to Avoid: None known. Materials to Avoid: Strong-oxidizing agents.
PTFE Coated Fiberglass Sewing Thread MSDS Number: THRD-09 Revision Date: 3-23-16 Safety Data Sheet Page 4 of 4 16. OTHER INFORMATION Disclaimer: Although reasonable care has been taken in the preparation of this document, we extend no warranties and make no representations as to the accuracy or completeness of the information contained herein, and assume no responsibility regarding the suitability of this information for the user’s intended purposes or for the consequences of its use.
Roller Buckle Safety Data Sheet Page 1 of 5 MSDS Number: FAS-09 Revision Date: 3-23-16 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc.
Roller Buckle Safety Data Sheet Page 2 of 5 MSDS Number: FAS-09 Revision Date: 3-23-16 4. FIRST AID MEASURES General: In case of accidents call a doctor immediately and show the msds to the doctor. Inhalation: Move the exposed person to fresh air at once. If respiratory problems, artificial respiration/oxygen. Get medical attention. Skin Contact: Wash skin with soap and water. Get medical attention if any discomfort continues. Eye Contact: Rinse with water. Contact physician if discomfort continues.
Roller Buckle Safety Data Sheet Page 3 of 5 MSDS Number: FAS-09 Revision Date: 3-23-16 Nickel CAS no.: 7440-02-0 EC no.: 231-111-4 8 h.: 0,05 mg/m3 2007 EXPOSURE CONTROLS Recommended Monitoring Procedures: Special health control must be carried out. Measuring of: Dust and metals in air. Results ought to be lower than TLV. Occupational Exposure Controls: Provide sufficient ventilation for operations causing dust formation.
Roller Buckle Safety Data Sheet Page 4 of 5 MSDS Number: FAS-09 Revision Date: 3-23-16 Test animal species: rat Comments: LD50 COMPONENTS’ TOXICOLOGICAL DATA Other Information Regarding Health Hazards: Inhalation: Dust may irritate respiratory system or lungs. Skin Contact: May cause sensitisation by skin contact. Irritating to skin. Eye Contact: Particles in the eyes may cause irritation and smarting. Sensitization: May give allergic disease in skin by prolonged and frequent exposition.
Roller Buckle Safety Data Sheet Page 5 of 5 MSDS Number: FAS-09 Revision Date: 3-23-16 Composition on the label Nickel: EC no.: R phrases: S phrases: Signal word: Hazard statements: Hazard statements: References (laws/ regulations): 99,9 - 100 % 231-111-4 R40 Limited evidence of a carcinogenic effect. R43 May cause sensitization by skin contact. R48/23 Toxic: danger of serious damage to health by prolonged exposure through inhalation. S2 Keep out of the reach of children. S22 Do not breathe dust.
Silica 600 MSDS Number: CL-0137 Revision Date: 3-23-16 Safety Data Sheet Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION Company Identification Product Identification UniTherm International Inc. 711 Jones Street Lewisville, Texas 75057 Product Name: Silica 600 Common Name(s): Silica Fabric EMERGENCY TELEPHONE NUMBER: For emergency involving spill, leak, fire, exposure, or accident call CHEMTREC (800) 424-9300, day or night 2.
Silica 600 Safety Data Sheet Page 2 of 5 MSDS Number: CL-0137 Revision Date: 3-23-16 P337+313 - Get medical advice/attention. 3. COMPOSITION/INFORMATION ON INGREDIENTS Ingredients: Silica fabric (CAS 7631-86-9) Exposure Limits: OSHA PEL 15 mg/m3 (total), 5 mg/m3 (respirable). ACGIH TLV 1 f/cc 4. FIRST AID MEASURES Inhalation: Remove person to fresh air. If condition persists, seek medical attention. Skin Contact: Rinse with copious quantities of cool water.
Silica 600 MSDS Number: CL-0137 Revision Date: 3-23-16 Safety Data Sheet Page 3 of 5 Engineering Controls: Local exhaust; dust collection Personal Protective Equip: HMIS PP, B | Safety Glasses, Gloves Safety glasses; cotton gloves; long sleeve clothing Wash thoroughly with soap and water after handling. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Tan Fabric Physical State: Solid Spec Grav. /Density: 2.
Silica 600 MSDS Number: CL-0137 Revision Date: 3-23-16 Safety Data Sheet Page 4 of 5 None special required. 15. REGULATORY INFORMATION COMPONENT / (CAS/PERC) / CODES *Silica, amorphous (7631869 n/a%) MASS, NJHS, PA, TSCA REGULATORY KEY DESCRIPTIONS ---------------------------------------------------------------MASS = MA Massachusetts Hazardous Substances List NJHS = NJ Right-to-Know Hazardous Substances PA = PA Right-To-Know List of Hazardous Substances TSCA = Toxic Substances Control Act 16.
Silica 600 MSDS Number: CL-0137 Revision Date: 3-23-16 Safety Data Sheet Page 5 of 5