SYSTXCCITC01 ---B Infinityr System Control Owner’s Manual NOTE: Read the entire instruction manual before starting the installation. The features and functions outlined in this Owner’s Manual reflect Version 1.0 software. See the Downloads section of www.MyInfinityTouch.Carrier.com for the latest software release and literature. US Patents: Carrierr U.S. Pat No. 7,243,004, Carrierr U.S. Pat No. 7,775,452, pointSETt U.S. Pat No.
TABLE OF CONTENTS PAGE INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 HOME SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Information Displayed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Wi-- Fi Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Information Buttons . . . . . . . . . . . .
TABLE OF CONTENTS (cont.) PAGE Home Fresh Air Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Away Humidity Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Away Fresh Air Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vacation Humidity Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vacation Fresh Air Control . . . . . . . . . . . . . . . . . . . .
TABLE OF CONTENTS (cont.) PAGE ENERGY TRACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 TIME / DATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Set Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manually Adjust Time and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup Daylight Savings Time . . . . . . . . . . . . . .
TABLE OF CONTENTS (cont.) PAGE WEATHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 UTILITY DEMAND EVENT RESPONSE SETUP . . . . . . . . . . . . . . . . . . . . . 62 Utility Event . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Price Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Price Settings . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONGRATULATIONS! Your decision to choose the InfinityR System Control puts you in a select group of homeowners who understand the value of precise comfort Control and appreciate the simplicity of an easy-- to-- use, intuitive, Control. Your new Infinity System Control offers high quality comfort technology. Please take a few moments to carefully read through this manual.
Wi--Fi Connectivity Status A13258C Connectivity status to the home Wi-- Fi network and MyInfinity Server is displayed in the top right hand corner of the Home Screen. When the Infinity System Control is connected to the home Wi-- Fi network and the MyInfinity Server, the signal strength bars will be displayed in white as depicted in the image above. Connection strength to the home Wi-- Fi network will be indicated by the number of solid white bars displayed.
A13260C S NOTE: If the Infinity System Control is not connected to the home network, a red “X” will appear over the strength bars. If the Infinity System Control is connected to the home Wi-- Fi network but loses connection to the MyInfinity Server, a triangle will appear over the strength bars as depicted in the image below. Connection strength to the home Wi-- Fi network will continue to be displayed by the number of solid bars. If this problem persists, please contact 1-- 800-- Carrier for assistance.
S Pressing on the Connectivity Status bars from the Home Screen will allow you to view the Remote Access Status screen. A13262C Information Buttons On the bottom of some screens will be an information icon. By pressing the information icon, a text box will display to show what interactions are available on that particular screen. To close the text box, touch the text box.
MAIN SCREEN The Main Screen is where most interactions will take place. Touch anywhere on the Home screen to arrive at the Main Screen. System Mode Once in the Main Screen, S To access your system mode touch the MODE label located in the upper right of the Control. S The drop-- down menu will allow you to choose between AUTO, HEAT, COOL, FAN ONLY and OFF, depending on the equipment installed in your system. S If OFF is selected your system will not Control temperatures, humidity, or fan.
S If HEAT is selected then the Infinity System Control operates only the heating system. S If COOL is selected then the Infinity System Control operates only the cooling system. S If FAN ONLY is selected, then the Infinity System Control operates the indoor fan but heating, cooling, humidification or dehumidification will not take place. Set Day and Time S To set the day and time for your home screen enter the Main Screen by touching anywhere on the Control.
S Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired temperature in 15 minute increments. S When the correct time interval is displayed, touch DONE. S To return to the scheduled program, touch HOLD UNTIL, and then select PER SCHEDULE. Adjusting Heating NOTE: If OFF is selected, the Heat, Cool, Auto and Fan Only will not be available. When changing from the OFF mode to Heat, Cool, Auto, or Fan Only, it is normal for the system to run the blower for a minute or two.
S On the left hand side of the screen, the comfort profile will switch to manual, and the system will be placed in a temporary hold. S Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired temperature in 15 minute increments. S When the correct time interval is displayed, touch DONE. S To return to the scheduled program, touch HOLD UNTIL, and then select PER SCHEDULE.
S To return to the scheduled program, touch HOLD, and then touch PER SCHEDULE. Adjusting Cooling S To adjust the cooling temperature, enter the Main Screen by touching anywhere on the Control. S With the system in either AUTO or COOL mode, use the Up (Y) and Down (B) buttons to set the desired temperature. S On the left hand side of the screen, the comfort profile will switch to MANUAL. S Touch the HOLD UNTIL button, then touch HOLD.
A14239 Selecting the HOLD option will permanently override your programmed schedule until you CANCEL ALL ZONES. d Selecting the HOLD UNTIL option will allow you to temporarily override your programmed schedule. d Once selected, use the Up (Y) and Down (B) buttons to change the time in 15 minute increments. d When the correct time interval is displayed, touch DONE.
FEATURES Adjust Fan Speed The Features function of Infinity System Control allows you to adjust the fan speed during continuous fan operation. S To adjust the fan speed, enter the Main Screen by touching anywhere on the Control. S Touch FEATURES on the top left of the screen. S A drop down menu will appear. Touch FAN selection. S Use the Up (Y) and Down (B) buttons to set the fan to AUTO, LOW, MEDIUM or HIGH, then touch SAVE. In zoned systems, the activity settings will apply to the selected zone only.
MENU SCREEN Your menu screen offers more features and Control for your Infinity System Control. Touch the menu button at the bottom right of the Main Screen. Comfort Profiles You will need to set the comfort profiles before you attempt to program your new Infinity System Control. S The COMFORT PROFILES button includes settings for Temperature and Fan Profiles, Humidity and Fresh Air Profiles, as well as Window Protection Setup.
A14241 For example to change your HOME comfort profile, touch the HOME icon. d Use the Up (Y) and Down (B) buttons to change the fan settings, heating and cooling temperatures. When you are done, press the DONE button on the bottom right. d Do the same thing to change the WAKE and SLEEP profiles. d The AWAY profile provides an extra feature called Advanced Smart Setback.
A14242 Home Comfort Profile Humidity Control S Touch WHEN AT HOME to set your humidity settings while the home is occupied to enjoy superior comfort. A14243 S If you have a humidifier installed for your system, touch HEATING HUMIDITY to set the desired humidity level within the home. d You will have the option to turn ON or OFF your humidifier from this screen.
A14244 Once your Humidifier is turned ON, use the Up (Y) and Down (B) buttons to set the desired humidity level between 5-- 45%. d Press SAVE when finished, or CANCEL to discard any changes. S Next, select your desired humidity level during cooling by touching COOLING HUMIDITY. d A14245 Use the Up (Y) and Down (B) buttons to set the desired dehumidification level between 46-- 58%.
Home Comfort Profile Fresh Air Control S If a ventilator is installed in your home, select the amount of fresh air to circulate during heating mode by touching Heating Fresh Air. NOTE: This option may not be available with the ERVXXNVA ventilator due to its simplified Control design. A14246 S You will have the option of choosing among AUTO, MANUAL, or OFF. NOTE: This option may not be available with the ERVXXNVA ventilator due to its simplified Control design.
Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level. d Press SAVE when finished, or CANCEL to discard any changes. S If applicable, next select the amount of fresh air to circulate during cooling mode by touching COOLING FRESH AIR. Again, you will have the option of choosing among AUTO, MANUAL and OFF. d Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level. d Press SAVE when finished, or CANCEL to discard any changes.
Use the Up (Y) and Down (B) buttons to set the minimum humidity level between 5%-- 45%. d Press SAVE when finished, or CANCEL to discard any changes. S To set the desired humidity level during cooling, touch COOLING HUMIDITY. d Use the Up (Y) and Down (B) buttons to set the maximum dehumidification level at NONE or between 55-- 65%. d Touch YES or NO for the system to over-- cool the conditioned space by up to 3_ F to remove as much humidity out of the air as possible.
The MANUAL setting allows you to select the percentage of fresh air to supply to your home. In the MANUAL mode, there are several selections available: Off, Low 25%, Low 50%, Low 75%, Low 100%, Medium, and High. The percent values are percent of an hour. d Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level. d Press SAVE when finished, or CANCEL to discard any changes. S If applicable, select the amount of fresh air to circulate during cooling mode by touching COOLING FRESH AIR.
A14248 S If you have a humidifier installed for your system, touch HEATING HUMIDITY to set the desired humidity level when you are away from home. d Use the Up (Y) and Down (B) buttons to set the minimum humidity level between 5%-- 45%. d Press SAVE when finished, or CANCEL to discard any changes. S To set the desired humidity level during cooling, touch COOLING HUMIDITY. d Use the Up (Y) and Down (B) buttons to set the maximum dehumidification level at NONE or between 55-- 65%.
NOTE: This option may not be available with the ERVXXNVA ventilator due to its simplified Control design. The AUTO setting will allow the user to choose the maximum fresh air that the ventilator will provide. Selections are Low, Medium or High. d The MANUAL setting allows you to select the percentage of fresh air to supply to your home. d Use the Up (Y) and Down (B) buttons to set the desired ventilator speed level. d Press SAVE when finished, or CANCEL to discard any changes.
SCHEDULES Program your Infinity System Control by selecting the SCHEDULES icon. You may select to use the guided scheduling feature, view or edit your schedule or upload your schedule from a micro SD card. A14249 View or Edit Schedule S To set a specific day use the Left (A) and Right (") buttons beside the day names. d If you wish to copy this schedule to other days, touch COPY above the day. d Select the days you wish to have the same schedule, then touch COPY.
S For Zoned Systems d To set a specific room, use the Left (A) and Right (") buttons beside the zone name. d If you wish to copy this schedule to a different zone, touch COPY above the zone name. d Select the zones you wish to have the same schedule, then press COPY. Guided Scheduling The Guided Scheduling feature will prompt you with simple questions to help set a schedule that meets your desired comfort level and lifestyle. If you are satisfied with your comfort settings, proceed to the next screen.
5. 6. 7. 8. S If you select NO, the next question will ask what time you leave the home. d Use the Up (Y) and Down (B) buttons to set the time you leave. d After you have selected the correct time, touch NEXT to continue. S You will then be asked what time you will return to your home. d Use the Up (Y) and Down (B) buttons to set the time you return home. d After you have selected the correct time, touch NEXT to continue.
d d If you select YES, you will return to step 2 and follow the process. If you select NO, you will see the newly created schedule. Upload My Schedule The Upload my Schedule feature will allow you to upload your schedules from a PC or MAC computer, load those schedules onto a micro SD card memory device, and upload the schedules into the Infinity System Control. S To download the MyInfinity application for your computer, sign into the MyInfinity website at www.MyInfinityTouch.Carrier.com.
S Install the micro SD card into the micro SD card slot on the bottom of the Infinity System Control. S On the Infinity System Control, select Schedules from the Menu screen, then select the Upload Schedule option. S If the folder and file have been placed correctly on the micro SD card, you will be asked if you wish to upload the schedule. d Select Yes. d When successful, press Next.
VACATION Touch the VACATION icon in order to set a prolonged vacation schedule. A12174 S Touch PLAN VACATION to begin your vacation schedule. S The system automatically selects to start vacation at the current time. S Use the Up (Y) and Down (B) buttons to set the time and date of when your vacation begins; then touch NEXT. The Control won’t allow you to select a vacation start date/time earlier than the current date/time.
A12110 28
REMINDERS With the Infinity System Control, there are accessory messages to remind you when it is time for maintenance. Select the REMINDERS icon from the menu screen. A12123 S You have the option of choosing a pop-- up reminder for your air filter, humidifier, UV lights, or ventilator pre-- filter. NOTE: This option may not be available with the ERVXXNVA ventilator due to its simplified Control design. S To enable a reminder, touch YES. S After you have selected your desired reminders, touch SAVE.
OPERATING STATUS The OPERATING STATUS menu gives a quick look at the status of your Infinity Heating and Cooling System. A12173 Equipment Operating Status When simultaneous heat/cool demand is enabled, this screen will display information message at this location. This includes the following messages: A160190 Within the operating status, you can view which function your system is performing, and at which stage the heating or cooling equipment is operating.
Accessories Status Within the accessory status, you can view how much of each accessory has been consumed, and reset the counter for each accessory. S To reset the counter for your installed accessory, touch the RESET button, then press SAVE. S To return to the previous menu, press CANCEL. A12108 Temperature Control Status The Temperature Control Status allows you to take a quick look at the actual temperatures, and temperature set points for each zone in your system.
A160187 32
DISPLAY The following display preferences can be adjusted for Infinity System Control, Temperature Units (°F or °C), Backlight Levels, Sound Settings and Screen Saver Settings. A14256 Temperature Units Select the desired temperature units, either °F for Fahrenheit, or °C for Celsius and touch SAVE. Temperatures will be displayed with half-- degree resolution for Celsius, or full degree resolution for Fahrenheit.
A14257 Set Backlight Levels S Backlight levels are programmable for each Comfort Profile setting HOME, AWAY, WAKE, or SLEEP. S Use the Up (Y) and Down (B) buttons to set/change the brightness of back lighting. d Brightness levels include OFF or 1-- 10. NOTE: After 30 seconds of inactivity on the touch screen, the backlight level will be set back to the current selected level which may be OFF.
Sound Settings To allow a buzzer to sound on each touch of the screen, touch ENABLE; otherwise, touch DISABLE. The “tick”sound that occurs when you touch the screen cannot be disabled. A14259 Screen Saver Settings To allow a photo to act as a screen saver, touch ENABLE; otherwise, touch DISABLE.
Activate Screen Lock S A message will pop up asking if you want to proceed with the screen lock. Selecting Yes will lock the screen and take you back to the home screen. A13247 S To unlock the screen, press and hold UNLOCK in the bottom left hand corner for 10 seconds. A13248 S The screen will change and the Control will then be accessible. If the screen is to be locked again, return to the menu, select the screen lock and touch YES.
ENERGY TRACKING The Infinity System Control has the ability to monitor and estimate the energy consumption of certain models of your Infinity System. For systems where energy tracking is not available, the menu icon will be shown in gray color, and this section does not apply. A12111 S Touch VIEW ENERGY USAGE to view the estimated energy consumption in daily, monthly or annual time intervals. You can view energy consumption in units (kWh for electric and selected unit for gas heat), or in dollars.
A12113 38
TIME / DATE The TIME/DATE icon allows you to set the time and date for the Infinity System Control. A14250 Set Time and Date The time and date can either be set manually or can be synchronized with the web server (only for Wi-- Fi enabled units). From the Main Screen, touch MENU, on the bottom of the Control. The TIME/DATE icon will bring up the time and date menu.
A14251 S Use the Up (Y) and Down (B) buttons to make the appropriate changes. S When you have completed all of the settings touch SAVE. Setup Daylight Savings Time You can program your Infinity System Control to automatically adjust for daylight saving time. From this screen, you can also choose to override the preprogrammed start and end dates for daylight saving.
Setup Time Zone The time zone can be selected by selecting the setup time zone from the menu. Then select the time zone for the location. Time zones for both US and Canada are included. A14217 Enable Time Synchronization For systems with Wi-- Fi® capability, after setting up the time zone, the time synchronization can then be done. Both must be done in order to enable time synchronization.
SERVICE Selecting the SERVICE icon from the menu screen will allow you to view service contact information, set-- up or modify service reminders and update the software for your wall Control. A14254C Service Information Your dealer information is easily accessible and may already be pre-- programmed in your Control by your dealer. Select the SERVICE INFORMATION option. S Either your dealer’s contact information or the Carrier Service number, 1-- 800-- Carrier, will appear.
Service Reminder Update Setup option will allow you to setup routine service reminders. Once the reminder option is enabled, you can select the frequency of these reminders (3 to 18 months). A13251 Software Update Carrier will periodically issue software updates for the Infinity System Control. Updates will download automatically through your Wi-- Fi connection, allowing you to install them at your convenience.
Updating Software Using Micro SD card S When software updates are available, they will be posted to on the downloads page of the MyInfinity website, www.MyInfinityTouch.Carrier.com/Infinity/Downloads. NOTE: You will obtain best results using a micro SD card that is 1GB to 32 GB maximum in size. Your micro SD card must be formatted as FAT32. S From the downloads page on the MyInfinity website, click on the link under the Download Latest Software S Read the End User License Agreement (EULA).
S Highlight the TSTAT folder in the WinZip window by clicking on the folder icon ONCE to highlight the proper folder to be downloaded to the micro SD card. Then click on EXTRACT. S Choose the micro SD card memory device root directory as the location to extract the folder from the zip file. When the download is complete, the TSTAT folder will appear on the root directory of the micro SD card. Verify that the files, including the “.hex” file, have been extracted into the TSTAT folder of the micro SD card.
S The Infinity System Control will perform a restart after the DONE button is pressed. Once the Infinity System Control has successfully restarted, the micro SD card may be removed. S This completes the software upgrade process. Updating Software Using Wi--Fi® When software updates are available, this reminder message will be displayed on the home screen.
A150194 Selecting YES will initiate the software update process. Your Infinity System Control will reboot in order to complete the software update process. All of your previously stored information and settings will be maintained. NOTE: Select DETAILS to view the release notes associated with the software to be downloaded. Selecting NO will allow to set-- up a reminder for a later time or you can disable the reminder feature for this particular software update.
Model / Serial Numbers This screen will allow you to access the model numbers and serial numbers for the installed equipment.
PHOTO UPLOAD With the Infinity System Control, you can upload a personal photo to act as a screen saver. Select the PHOTO UPDATE icon from the menu screen. A12122C S Use the PC application to upload the photo on the Control and save it to a standard micro SD card. Go to https://www.MyInfinityTouch.Carrier.com and select the Infinity System Control and click the downloads tab to download the MyInfinity computer Desktop application for either PC or MAC.
HEAT SOURCE (IF APPLICABLE) With the Infinity System Control, you can select the desired heat source of your system, if your system is equipped as a HYBRID HEATR System. Select the HEAT SOURCE icon from the menu screen. A12155C NOTE: Options available on this screen will correspond to the equipment attached. Options may appear that are different than those shown, below. S The default is for the system to Control the heat source. S To have only the furnace Control, select FURNACE ONLY.
ZONE NAMES (IF APPLICABLE) With the Infinity System Control, you have the ability to customize zone names. Select the ZONE NAMES icon from the menu screen. A12156C S Touch the zone in which you choose to change the name. S Choose between selecting a COMMON NAME or CREATE A CUSTOM NAME. d If you choose select a common name, touch the name you want for that particular zone. d If you choose create a custom name, use the ( or clear) button to erase the existing zone name.
WIRELESS The Infinity System Control can connect to the in-- home Wi-- Fi® network to connect the Infinity System to the Internet. The Infinity System Control is intended to connect to an existing home Wi-- Fi network, or to be added to an existing Infinity System Wi-- Fi network. If the in-- home Wi-- Fi is found to be incompatible, an Infinity Wireless Access Point (SYSTXXXGWR01) or any other compatible wireless router can be installed to establish Wi-- Fi connectivity.
A150190C S S S S Select the WIRELESS from the menu screen Make sure the Wi-- Fi connection is enabled, by touching ENABLED. Touch SETUP A WI-- FI CONNECTION to begin the process. Next, touch SCAN FOR AVAILABLE ACCESS POINTS.
A13235 S On the next screen look for the SSID of the router/access point. After being selected, it will be outlined in faint blue and will be indicated by a checkmark. Then select NEXT. A150175 S The selected network will show. Choose an appropriate Wi-- Fi security. Usually auto-- detect will correctly identify the type of security used. If the network has no security it will show as on the left, but a secured network will prompt for the Wi-- Fi security key.
A150191 S If a Wi-- Fi security key is shown as on the right hand picture above then select the white bar and enter the security key, then select NEXT. S Touch in the security key area, and the keyboard will appear. d Use the on screen keyboard to enter the Wi-- Fi security key, then touch NEXT. S The Control will inform you if the connection is successful. If so, touch DONE. d If the connection is unsuccessful, verify that the proper information has been entered before you touch RETRY.
S After the Control has connected to the network, go to www.MyInfinityTouch.Carrier.com to register the unit and begin remote access. This requires the MAC address and serial number of the Infinity System Control. To find the serial number and MAC address of the Infinity System Control, click on Menu, Down Arrow, Wireless and View MyInfinity Info. This screen will provide the information needed on the MyInfinity website during registration.
A150190C S S S S Select the WIRELESS from the menu screen Make sure the Wi-- Fi connection is enabled, by touching ENABLED. Touch SETUP A WI-- FI CONNECTION to begin the process. Next, touch SCAN FOR AVAILABLE ACCESS POINTS. A12115 S Select the myHVACxxxxxx connection from the list, then touch NEXT (myHVAC is followed by the last 6 digits of your Wireless Access Point’s MAC address; see the label on the bottom of the TP-- LINK Wireless Access Point).
SSID & Security Key A12357 S You may have to use the down arrow to scan to the next screen to find “myHVACxxxxxx”. A150175 S Use the on screen keyboard to enter the Wi-- Fi security key, then touch NEXT. d Touch in the security key area, and the keyboard will appear. d The security key can be found on the back of the TP-- LINK Wireless Access Point.
A150192 S The Control will inform you if the connection is successful. If so, touch DONE. d If the connection is unsuccessful, verify that the proper information has been entered before you touch RETRY. The Control will go through the process again. A12118 S After your Control has connected to the network, go to www.MyInfinityTouch.Carrier.com to register the unit and begin remote access. This requires the MAC address and serial number of the Infinity System Control, NOT the Wireless Access Point.
will provide the information needed on the MyInfinity website during registration. S See the Control Registration instructions included in the package for more information. S When the connection to the MyInfinity web server has been established, the status screen will show Connected for both Wi-- Fi and the server. TP-- LINK is a trademark of TP-- LINK Technologies Co., Ltd. Wi--Fi® Diagnostics Wi-- Fi diagnostic information is available for troubleshooting purposes.
WEATHER When the Infinity System Control is connected to a Wi-- Fir network, use the WEATHER icon to retrieve the weather forecast based your postal code. A160186C S To enter your postal code, touch CHANGE CURRENT LOCATION. S Next, select your country (United States or Canada). S To enter your postal code, touch in the blank area; then enter your postal code using the on screen keyboard.
UTILITY DEMAND EVENT RESPONSE SETUP This section is only applicable if your utility company is running a demand response or price response program in which you have agreed to participate. Contact your local electrical utility company for information about programs in your area. NOTE: If you wish to participate with your electrical utility company, a service person or Utility representative must enable the utility event interface.
type of event, the adjustment to the heating and cooling set points, the time the event will end, an accept button, and an override button. S Pressing the accept button will accept the adjustments made to the heating and cooling set points. S Pressing the override button will change the heating and cooling set points back to their original values prior to the event.
A14264 Demand Response Demand response determines how the heating and cooling set points will be adjusted during a demand response event with two choices - offsets or absolute temperature. When offsets are selected, the heating and cooling set points are adjusted by the number of degrees selected. When absolute temperature is selected, the heating and cooling set points are adjusted to heating and cooling temperatures.
Demand Settings When a demand response is received from the utility company, the heating and cooling set points will be adjusted according to the absolute temperature or offset shown here. If the set point at the time of the event is more favorable (uses less energy) than what you have programmed, the Infinity System Control Thermostat will use the more favorable set point for the duration of the event.
Restore UE Factory Default Settings Restore UE (Utility Event) factory default settings will restore all utility event set points and price settings to their original factory default values.
STATEMENT INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Pour se conformer aux limites d’exposition RF FCC et IC pour la population générale / l’exposition incontrôlée, l’antenne utilisée pour cet émetteur doit être installée pour assurer une distance de séparation d’au moins 20 cm de toutes les personnes et fonctionnant conjointement avec toute autre antenne ou émetteur. This Device complies with Industry Canada License-- exempt RSS standard(s).
NOTES 69
70
71
Infinity, Touch ’N’ GoR and HYBRID HEATR are trademarks or registered trademarks of Carrier Corporation in the United States and other countries. Other brands and product names are trademarks of their respective holders. Wi-- FiR is a registered trademark of Wi-- Fi Alliance Corporation. Copyright 2017 Carrier Corp. S 7310 W. Morris St.