User Guide

ManualsBrandsUnited Security Products ManualsElectronicsAuto Voice Dialer with 4 VMZ

United Security Products, Inc. Tele:800-227-1592

10801 Vista Sorrento Parkway Fax:858-455-0036

San Diego, Ca. 92121

Automatic Voice Dialers

AD2000 and AD2001

Quick Start Guide

This Quick Reference Guide provides directions for FAST START

installation, setup and programming of your innovative alarm sys-

tem. It also serves as a handy reference.

NOTE: Have the program planner, found in the manual in front

of you ready to be filled in. Plug in Main Phone line to the “Tel-

In” port on dialer. Connect a 12Vdc power supply with a mini-

mum rating of 100mA from an existing alarm panel or an exter-

nal power source to the indicated terminal blocks.

Summary of content (4 pages)

PAGE 1
United Security Products, Inc. 10801 Vista Sorrento Parkway San Diego, Ca. 92121 Tele:800-227-1592 Fax:858-455-0036 Automatic Voice Dialers AD2000 and AD2001 Quick Start Guide This Quick Reference Guide provides directions for FAST START installation, setup and programming of your innovative alarm system. It also serves as a handy reference. NOTE: Have the program planner, found in the manual in front of you ready to be filled in. Plug in Main Phone line to the “TelIn” port on dialer.
PAGE 2
Overview When you apply power to the unit, you will see an identification for the unit you acquired followed by the first option- Program Numbers. There are essentially four main menus for the dialer-Program Numbers, Program TLine, Program OGM’s (outgoing messages), and Program Channels. There are three operating conditions-OFF, Operate and Test T-line. Step 1.
PAGE 3
After you choose to deliver 1 message or more (see below) you will be promted to RECORD,PLAY and ACCEPT the message(s). RECORD OGM1 PLAY OGM ACCEPT PRESS R 1 (YES) 2 (NO) 1 (YES) 2 (NO) For any delivered message including an ID the sequence is the same. Press and hold the ‘R’ button to begin recoding your message. To stop release the button. OPT#3: 2OGMS 1 (YES) 2 (NO) To deliver 2 different messages without an ID, Press 1 otherwise Press 2.
PAGE 4
CH 1: N.O./N.C. N.O. Normally Open sensor will alarm when closed. 1 (N.O.) 2 (N.C.) CH 1: MOM/CONT 1 (MOM) 2 (CONT) CH 1: DIAL#1 1 (YES) 2 (NO) In a momentary setting, when the alarm is triggered, the only way to turn the dialer off is to reset it remotely or turn the unit off. In a continuous setting the alarm might sound but it will reset automatically when the alarm condition doesn’t exist or all dialing attempts have been made, whichever is first.