UIS User Manual ZBM-220 1|Pa ge
UIS Contents Certification Notices 1. Overview 2. Specification 3.
UIS Certification Notices FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
UIS Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please see the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point.
UIS 1. Overview ZMB-220 is a wireless communication modem based on IEEE802.15.4, which can be widely used in home automation and security, automatic meter reading, factory automation, toys and so on. 2. SPECIFICATION General Specification Specification Transmit Frequency Modulation Programmable Output Power Operation Voltage Environmental Operating Temperature Storage Temperature Humidity Mechanical Specification Dimension (WxHxD, mm) 2.4-GHz IEEE 802.15.
UIS 3.
UIS Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Name Description GND Power Ground AVDD DC input(+2.0 ~3.6V) P2_4/XOSC3 Port 2.4/32.768 kHz XOSC 2K_Q1 P2_3/XOSC3 Port 2.3/32.768 kHz XOSC 2K_Q2 P2_2 Port 2.2 P2_1 Port 2.1 P2_0 Port 2.0 P1_7 Port 1.7 P1_6 Port 1.6 VDD DC input(+2.0 ~3.6V) GND Power Ground P1_5 Port 1.5 P1_4 Port 1.4 P1_3 Port 1.3 P1_2 Port 1.2 Port 1.1 – 20-mA drive P1_1 capability VDD DC input(+2.0 ~3.6V) Port 1.