User's Manual

ManualsBrandsUnited Integrated Services ManualsElectronicsWIRELESS MOTION (PIR) SENSOR

Wireless Motion (PIR) Sensor User's Manual

Product Name : Wireless Motion (PIR) Sensor

Model No : WMS-110

Input Power: 3V DC

Features Description:

1. The use of Infrared Human Motion Detection of sensor detector, it self cannot transmits light

wave of the infrared.

2. The WMS-110 (Wireless Motion (PIR) Sensor) attached with the frame, the angle can be

adjusted to detect.

3. The use of two UM-4 AAA 1.5V alkaline batteries，battery power is insufficient to inform the

host will automatically operate a very low power, the battery can be used for more than one

and half years.

4. Easy link, when install at the first time to press the set button on the side of product binding

with repeater.

5. Can use the WPC-110 (Wireless Power Controller) do so with even control, For example:

Corridor night auxiliary lighting.。

Outline Dimensions:

Summary of content (4 pages)

PAGE 1
Wireless Motion (PIR) Sensor User's Manual Product Name : Wireless Motion (PIR) Sensor Model No : WMS-110 Input Power: 3V DC Features Description: 1. The use of Infrared Human Motion Detection of sensor detector, it self cannot transmits light wave of the infrared. 2. The WMS-110 (Wireless Motion (PIR) Sensor) attached with the frame, the angle can be adjusted to detect. 3. The use of two UM-4 AAA 1.
PAGE 2
Feature Locator: 1. 2. 3. 4. 5. (SET) Setting button PIR Sensor Battery cover Stent State of LED window Installation Hints: 1. First use UM-4 AAA 1.5V alkaline batteries 2 into WMS-110 (Wireless Motion (PIR) Sensor) battery holder, and check the battery positive and negative polarity marked is correct. 2. The WMS-110 (Wireless Motion (PIR) Sensor) by pressing the SET button at the side, and then press the WR-110 (wireless repeater) at the bottom of the SET button, Wait for 30 seconds to 1 minute.
PAGE 3
straight line effective range 10 meters. May pull closer between booth's distance tests to have a look first, whether to have the improvement segment condition Specification: : Wireless Motion(PIR) Sensor Model No. WMS-110 Electrical Specification Transmit Frequency 2.4GHz Modulation GFSK Transmit Power 0 dBm Channel spacing 1 MHz Channel NO. 81 Channel(2401Mhz~2481Mhz) Range of operation 10 meters Operating voltage 3.
PAGE 4
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.