User's Manual

ManualsBrandsUnited Integrated Services ManualsElectronicsWIRELESS LOCK CONTROLLER

Wireless Lock Controller User's Manual

Product Name: Wireless Lock Controller

Model No: WLC-110

Input Power: 12V DC

Features Description:

1. WR-110 (Wireless repeater) use wireless way to dispatch signal to WLC-110 (Wireless Lock

Controller) which can open the lock and send back the state of open to repeater

2. Framework of WLC-110 (Wireless Lock Controller) is one for DO output and two for DI input

interface.

3. WLC-110(Wireless Lock Controller) needs to collocate with lock equipment for 12V DC

Power.

4. It is east to link with Gateway. Lock equipment and lock controller wires link together. Then

need to press the back of setting button and Binding with repeater.

5. Be able to use cell phone to control and open the door. That provides more convenience for user.

Outline Dimensions:

Feature Locator:

Installation Hints:

1. Foundation stop plate

2. State of LED window

3. Outlet wires

4. (SET) Setting button

Summary of content (5 pages)

PAGE 1
Wireless Lock Controller User's Manual Product Name: Wireless Lock Controller Model No: WLC-110 Input Power: 12V DC Features Description: 1. WR-110 (Wireless repeater) use wireless way to dispatch signal to WLC-110 (Wireless Lock Controller) which can open the lock and send back the state of open to repeater 2. Framework of WLC-110 (Wireless Lock Controller) is one for DO output and two for DI input interface. 3. WLC-110(Wireless Lock Controller) needs to collocate with lock equipment for 12V DC Power. 4.
PAGE 2
1. Circuit of lock equipment needs to link with WLC-110 (Wireless lock controller) that is able to use. 2. Such as collocation with SL-130B lock equipment. Illustration of circuit is as below.: 3. WLC-110 (Wireless lock controller) has five wires, color wire function as below. a. Black wire Power input 0V(negative) b. Red wire Power input 12V(positive) c. Yellow wire Lock open control output d. Green wire Door Position status input e. White wire Lock Position status input 4.
PAGE 3
Troubleshooting: Problem: When link with WR-110 (Wireless repeater), there is no display of LED indicator light for WLC-110 (Wireless lock controller) to flash two or three times. Solution: a. Need to confirm with circuit of lock controller whether it is good and there is power for 12V DC. b. May be not press set button, need to link with repeater again. c. If the above handles are invalid, please contact with agency. Problem: Unable to link with WR-110 (wireless repeater). Solution: a.
PAGE 4
Specification: Wireless Lock Controller Model No. WLC-110 Electrical Specification Transmit Frequency 2.4GHz Modulation GFSK Transmit Power 0 dBm Channel spacing 1 MHz Channel NO. 81 Channel(2401~2481Mhz) Range of operation 10 meters Operating voltage 12V DC Current (typical) 20mA Max. Input Signal Dry Connect *2 Output Signal 15V 120mA Max.
PAGE 5
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.