User's Manual

ManualsBrandsUnited Integrated Services ManualsElectronicsWireless Button Controller

Wireless Button Controller User's Manual

Product Name: Wireless Button Controller

Model No: WBC-110

Input Power: 3V DC

Features Description:

1. To wireless transmission the button signals to the repeater set, you can start or lifting function.

2. Use CR2032 type Li-ion batteries, battery power is insufficient to inform the host will

automatically operate a very low power; the battery can be used for more than two years.

3. Easy link, when install at the first time to press the set button on the side of product binding

with repeater.

Outline Dimensions:

Dimension (W*H*D, mm) 31*65*13

Feature Locator:

Installation Hints:

1. WBC-110(Wireless Button Controller) by pressing the SET button at the bottom, and then

press the WR-110 (wireless repeater) at the bottom of the SET button, Wait for 30 seconds to

1 minute. If LED indicator light flash three times that means linking success. If LED indicator

light flash two times that means fail.

1. Full Arm Button (FA)

2. Partial Arm Button

3. Disarm Button (DA)

4. State of LED window

5. (SET) Setting button

Summary of content (4 pages)

PAGE 1
Wireless Button Controller User's Manual Product Name: Wireless Button Controller Model No: WBC-110 Input Power: 3V DC Features Description: 1. To wireless transmission the button signals to the repeater set, you can start or lifting function. 2. Use CR2032 type Li-ion batteries, battery power is insufficient to inform the host will automatically operate a very low power; the battery can be used for more than two years. 3.
PAGE 2
. Join to link with Gateway, please reference user manual of WCC-110 (Wireless console controller). 3. Disarm Button (DA) function: Disable all burglarproof sensor alarms BUT enable all anti-disaster sensor alarms. 4. Partial Arm Button (PA) function: Enable all partial_arm_mode-enabled burglarproof sensor alarms AND enable all anti-disaster sensor alarms. 5. Full Arm Button (FA) function: Enable all sensor alarms. 6. If start any Button (DA) (PA) (FA) the Green LED flash that means linking success. 7.
PAGE 3
Specification: Wireless Button Controller Model No. WBC-110 Electrical Specification Transmit Frequency 2.4GHz Modulation GFSK Transmit Power 0 dBm Channel spacing 1 MHz Channel NO. 81 Channel(2401~2481Mhz) Range of operation 10 meters Operating voltage 3.
PAGE 4
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.